15,000 mm waterproof fabric, waterproof zippers, 100% waterproof seams.

Waterproof

60 g/m² insulation, comfort temperature rating of -7°C.

Warmth

The RET < 12 and large ventilation zippers make the pants very breathable.

Breathability

These ski pants are designed for skiers who are always looking for fresh tracks just off the groomed runs after a snowfall.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Frequency

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

modular

Windproof

Pocket

Type of Length

Type of Bell

Main Material

RECCO® technology is used in the majority of ski resorts and increases the chances of being located in the event of an avalanche. The reflector, which is built into the jacket, can be located by rescue services via a detector. Although they do the same job, they should not replace an avalanche transceiver.

Equipped with RECCO® technology to improve search and rescue in the event of an avalanche

- 2 hand pockets
- 2 thigh pockets
- 1 mesh pocket in one of the thigh pockets for your phone
- Snow gaiters 
- Adjustable waistband 
- 2 large zippers for ventilation
- Braces loops
- Belt loops

A practical and comprehensive set of accessories for all your outings

The waterproof component and the assembly prevent water getting in. The seams are waterproof, and the zippers are also waterproof and under a protective flap. This jacket has been tested in a special shower that reproduces the conditions of the ski resorts, and in the field for several days in different weather conditions.

Highly waterproof (15,000 mm Schmerber) and tested in real-life conditions

A fabric's water-repellent property is its ability to let water slide off its surface without soaking in. The fabric doesn’t soak up water and so remains lightweight, breathable and warm. It is made from a treatment on the outside of the fabric, which must be renewed (every 3 washes).

Water-repellent pants, like all Quechua pants

The pants are padded with 60 g/m² insulation: just enough to keep you warm without being too thick.

Warm pants without compromising on breathability

The RET, or the evaporative resistance of the material (ISO 11092 standard), is 12. The lower this rating, the more water vapour generated by the body evaporates.
 
RET < 9 = extremely breathable   
9 < RET < 12 = very breathable 
12 < RET < 20 = breathable
RET > 20 = little or no breathability.

Breathable fabric and ventilation (essential for good breathability)

This is a very thin polyurethane film that makes the material waterproof while remaining breathable. More flexible, lightweight, resistant and often more breathable than coating, which is less expensive and requires a protective lining, similar to paint applied to the inside of the fabric.

Made with a membrane component

Beyond the warranty period (2 years), your product will still be repairable (seams, zippers, etc.). 

This product is repairable. 

Weight

You don't need to wear anything under these padded pants. However, in very cold weather, you can wear a breathable thermal base layer (known as a layer 1).

What should you wear under your ski pants?

The water repellency of your pants should be reactivated regularly (every 3 washes): over time, even though they remain waterproof thanks to the component, they seem to start absorbing water. To do this, use a reactivating spray or a treatment reapplication product.

How can you reactivate the water repellency of your ski pants?

Ski Pants & Bibs

clearance

Compact, it fits easily in a pocket or backpack.

Compact design

This beanie can be worn unrolled or rolled for a trendy look.

Maximum washing temperature 30°C. Normal cycle.

Condition

Skill Level

type of lining

Reversible

Beanie Length

Type of Beanie

Style

All our adult Wedze hats come with a small inner label on the back seam. You can instantly see which way to put it on: place the small marker on the back of the neck—that’s it! The hat fits your head perfectly!

Wedze models fit adults with a head size between 56 cm and 59 cm (22” to 23”). Depending on the elasticity of the weave, this measurement can vary slightly. 

Adult size

Ski Hats & Beanies

10,000 mm (Schmerber) membrane, taped seams.

Insulated with synthetic loose fibres, for use in temperatures as low as -6°C.

Breathable fabric and ventilation strip on the back

You can wear this versatile jacket for all of your outings whatever the weather thanks to its synthetic fibre insulation, soft collar and ventilation.

Snow Skirt

Ventilation Zippers

Season

sleeve length

Membrane Construction

RECCO system

type of waterproofing

type of hood

thumb pass

breathability (in RET)

Removable Hood

Hood

Zipper Type

Schmerber

Fastener Type

The waterproof zippers, snow skirt, high collar, and adjustable hood and cuffs offer superior insulation to keep you warm.

In addition to the padding, which components provide warmth?

The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This component prevents water from seeping in while wicking away perspiration. The membrane is unbeatable when it comes to keeping you warm and dry.

What is a membrane and what does it do?

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a water resistance of 8,000 mm therefore withstands the pressure exerted by 8,000 mm of water.

How is the water resistance of a jacket measured?

The 500 jacket is made of sturdy, water-resistant materials that reduce wind chill for better protection against the elements. To check its waterproof rating, this jacket was tested under a special shower test that replicates the conditions skiers face. This jacket’s waterproofing was field-tested in various weather conditions for several days.

Which parts of the jacket protect me in bad weather?

Water repellency is a material’s ability to let water bead off the surface without being absorbed. This jacket features water-repellent components that improve its weather resistance. The exterior surface of the fabric is treated to make it water-repellent.

What is the water-repellent feature of my jacket for?

Bear in mind that the water-repellent feature can be reactivated. To do this, you can use a waterproof spray (sold in our stores): spray the product evenly over the entire item, then allow to dry for 10 to 12 hours.

How to reactivate your jacket’s water repellency

This jacket wicks moisture away. To determine a fabric’s breathability, we measure its resistance to evaporative heat (RET) based on a standardized ISO 11092 test. The lower the RET, the more breathable the fabric.The 500 ski jacket has a RET of 11. However, it is Wedze’s technical solutions (zippers, vents, mesh) that reduce condensation and maximize breathability.

What is a breathable jacket?

Slim fit. The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

How does the 500 ski jacket fit?

To stay warm and dry, we recommend using the 3-layer technique: 
- Layer 1 or second skin, to stay dry. 
- Layer 2 or insulating layer, to keep the heat in.
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

The snow skirt adjusts automatically, and adjustable cuffs block drafts and snow, especially in the event of a fall.

Keeps snow out if you fall

* Close all the zippers on the jacket.
* Turn it inside out.
* Machine wash at 30°C on the delicate cycle with little detergent and no fabric softener. 
Important: Use a gentle/delicate spin cycle (less than 800 rpm). Spinning too fast may create clumps that are difficult to undo.

How should I wash my jacket?

Tumble dry (strongly recommended). 
* Gentle or delicate cycle. 
* Dry on several long cycles to dry completely. * If you do not have a dryer, it will take longer to dry (drying flat can take 1 to 2 weeks). Make sure you pat the jacket to avoid any lumps.

How to dry your jacket

This product is repairable. Solutions may be offered to you in-store. If we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Chest: 85 cm (33.5 in)
- Arm: 57 cm (22.4 in) (from shoulder to wrist)
- Waist: 67 cm (26.4 in)
- Inside leg: 83 cm (32.7 in)
- Hip: 99 cm (39 in)

To help you choose the right size

Women Ski Jackets

Low: component provides moisture wicking with minimal drying.

Moisture management

Average: brushed lining for warmth. 180 g/m²

Designed for low intensity (low perspiration) skiers seeking a comfortable and warm undergarment.

Intensity

The BL 100 Ski Base Layer Bottoms have a regular cut.
This is a classic, straight cut. Suitable for all body shapes.

How do the BL 100 Ski Base Layer Bottoms fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive, offers excellent performance, and can be knit to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.


What are the benefits of polyester?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

The model wears size M and is 175 cm (5’9”) tall.
Measurements:
Waist size: 67 cm (26”)
Hip measurement: 99 cm (39”)
Chest size: 90 cm (35”)

Ski Leggings & Tights

200 g/m² insulation. Brushed knit lining. Long cuff with good coverage.

Waterproof membrane and water-repellent outer fabric.

Zip opening for the thumb. Wrist leash so you don’t lose the mittens.

Easy dressing

Polyurethane palm and finger tips for extra durability.

Abrasion resistance

These warm, waterproof, fully-taped and clever ski mittens with long cuffs and wide zippered openings are very easy to put on. 

Maximum wash temperature of 30°C. Delicate cycle.

leash

reflective

Tightening Type

Insulation keeps hands warm. This polyester-based synthetic component traps more or less air according to its thickness. The thicker the insulation, the more air it contains and the warmer it is. These mittens have 200 g/m² thick insulation.

Will my child stay warm when playing in the snow?

Use the clip system to attach the mittens to the sleeves of their Decathlon ski suit or jacket for 1-5 year-olds.
The fun design of this accessory encourages children to attach the mittens to their sleeves all on their own! The colours combine to create animal characters.
The mittens will always be ready to put on!


How do I make sure my child doesn’t lose their mittens?

If you have don't have a jacket or a ski suit, no worries! An elastic cord inside the mittens keeps them on the child's hand.

What if I don’t have the Decathlon ski suit or jacket?

Kids Ski Gloves & Mittens

Chest padding: 150 g/m². Arms and legs: 100 g/m². Brushed knit lining. 

100% taped seams on the buttocks. Elastic hem and hood.

One chest pocket, one secure ski pass pocket.

Pockets

Label on the lining for writing your child’s name.

Customization

This ski suit is suitable for children aged 5 to 13, for their first skiing, snowboarding or sledging descents. All-in-one to stay warm and dry! 

Type of Brushing Boots

Adjustable Length

How to dress your children so they stay warm on the slopes

Thermal insulation will keep your young skiers at just the right temperature. This garment adapts to the body’s movements and to the outside environment. We use synthetic insulation to keep the body warm. Made from polyester, it stores air depending on the length of the fibres. The thicker the insulation, the more air it contains and the warmer it is. 

Synthetic thermal insulation

The coating is a waterproof substance that's spread on the inner side of the outer suit fabric. It prevents water from seeping into the garment but allows water vapour produced by the body's physical activity to escape. This keeps kids dry and comfortable.

Coating treatment

Kids' Ski Clothing

Lightweight and compressible. Fits easily inside a pocket or backpack.

This fleece neck-warmer is designed to keep your kids warm this winter.

100 g/m² insulation. Fleece lining at the seat + Warmseat = 54% more warmth.

Waterproof coating 10,000 mm water (Schmerber). Fully taped seams.

Patented PNF system: adjustable leg length up to 12 cm.

Adjustable

Knee pads: removable foam for comfort when kneeling in the snow.

User comfort

The bib keeps the snow out at the back. Lower leg gaiters

Limits snow entering

3 pockets, including a secure chest pocket (perfect for cereal bars).

Made for ski and snowboarding, these bib pants feature a removable foam padding at the knees and fleece lining on the buttocks.

pattern

Stitching Type

With Straps

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

Practical info: How can I stop snow from getting into my bib pants?

To make sure you stay warm and dry, we recommend using the 3-layer rule:
- Layer 1, a base layer to keep you dry. 
- Layer 2, an insulating layer to keep you warm. 
- Layer 3, a protective layer against the elements.

The resistance of a fabric is measured by the height of the water column (measured in mm) that the fabric can withstand (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. The fabric of the Salopettes 500 has a waterproof rating of 10,000 mm, meaning it is able to withstand the pressure of 10,000 mm of water.
For skiing, we recommend fabrics with resistance between 3,000 mm and 10,000 mm.

How is fabric waterproofing measured?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. Turn the product inside out. Use a small amount of detergent. Do not use fabric softener.
*Spin between 800 and 1,200 rpm.
*Dry flat or tumble dry.
Do not dry clean. Do not place on a radiator or heat source.

How do I wash my bib pants?

onlyonline

Waterproof membrane, 10,000 mm water rating (Schmerber). 100% taped seams. Hood.

Comfort temperature: -7°C. Wadding: 100 g/m² body, 60 g/m² legs.

Elastic hem to slip over the shoe, helmet-style hood.

Can be turned up to fit your child's height.

2 hand pockets, one chest pocket, one ski pass pocket, one inner mesh pocket.

Thumb loop keeps the sleeves on top of gloves.

Ease of use

Why say yes to the ski suit? Because it's stylish, and because it provides warmth and freedom of movement for children. 

Bottom Shape

This ski suit has elastic gaiters at the bottom that cover the boot. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting into my ski suit?

The resistance of a fabric is measured by the height of the water column (measured in mm) that the fabric can withstand (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. The fabric of the 900 ski suit has a waterproof rating of 10,000 mm, and so resists the pressure of 10,000 mm of water.
For skiing, we recommend components between 3,000 mm and 10,000 mm.

We lab-test each of our products to validate its waterproofing value. How do we carry out this test? We fit the jacket on a mannequin that spends a few hours under a shower.
Using this test, we can confirm that the jacket protects you from snowfall or a light rain shower of 6 cm in one hour.

How is the water resistance of a ski suit measured?

We lab-test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

To optimize your product’s performance and durability, we recommend:

*Machine wash at 30°C on a synthetics cycle. Turn the product inside out. Use a small amount of detergent. Do not use fabric softener.
*Spin between 800 and 1,200 rpm.
*Dry flat or tumble dry.
Do not dry clean. Do not place on a radiator or heat source.

How do I wash my child's ski suit?

This hat will keep your child’s head warm. 

Water-Repellent

The yarn, dye, knit, pompom assembly: all the manufacturing steps of this hat are done in France by our industrial partners! 

To guarantee a 100% made in France product in these colours, we have chosen to offer you a 100% knitted, single-material version.

Made in France

Wedze hats fit children with a head size between 50 and 55 cm. Depending on the elasticity of the weave, this measurement can vary slightly. For head sizes smaller than 50 cm, choose a baby size.

Sizing

All our Wedze kids hats come with an inner label to write your child’s name. 
This also lets you instantly see which way to put it on: place the label on the back of the neck—that’s it! The hat fits perfectly!

wedze

Women's Warm Breathable Ski and Snowboard Jacket, 500 AM