clearance

Good foot support at high speed on-piste and off-piste.

Cushioning

Classic binding with turn strap: The strap opens up to 180° so it doesn’t get in the way.

Fast acting

Adjustable

M = 22.5 cm to 26 cm
G = 26.5 cm to 30 cm

Anatomic design

Conventional fastener: pump to achieve the required support. No limit.

Stability

Pair of bindings, 2 discs, 8 screws compatible with discs, and 8 washers

Capacity

For boards with normal inserts or Burton Channel (not Burton 3D-compatible).

Compatibility

This traditional snowboard binding allows you to discover snowboarding and improve, on-piste and off-piste.

Condition

Skill Level

Attachment Type

ref. number 8576631: 2 front strap screws and 2 rear strap screws 
ref. number 8576570: 4 strap attachments 
ref. number 8576632: 1 pair of toe straps size M
ref. number 8576633: 1 pair of toe straps size L 
ref. number 8576569: 4 ankle strap attachments 
ref. number 8576639: 1 pair of ankle straps size M
ref. number 8576638: 1 pair of ankle straps size L
ref. number 8576658: 1 disc and 4 screws (16 mm)
ref. number 8576630: 2 highback screws

After-sales parts list

The SNB 100 Snowboard Binding is a traditional binding, designed for discovering snowboarding and supporting your progress on groomed slopes and off-piste.
It offers all the basic functions of a good snowboard binding (comfort, support, and rigidity to steer the board), but without additional options, to make it as affordable as possible. There is no adjustment of the angle of the highback, and you will need to use a screwdriver on the strap screws.

Program/terrain

The SNB 100 Binding allows you to easily centre your feet on the board:
- 3 positions for screws on the disc: 18 mm (0.7”) of adjustment between minimum and maximum
 - Adjustment of the highback from front to rear: +12 mm (0.5”) of additional adjustment
The aim is for the boot to hang over the board as much at the toe as the heel.
The straps can then be adjusted to the boot with the pre-drilled positions on the straps.

Adjustment options

Turn strap system: The strap is mounted onto a hinge that turns it inward when you lift your foot.
When putting the boot on, there is space to insert the boot into the binding without any discomfort. This also prevents the strap and the hooks from getting crushed with the boot.

Opening mechanism

The stance is the distance between the bindings in cm. It can be adapted according to your body shape, but all snowboards have a recommended stance for bindings (shown by a mark between the binding inserts). If you want to position your feet further apart or closer together on the board, test it to see if the stance is suitable for you.

Stance, binding spacing

For piste/off-piste boards:
To keep feet closer together, move the binding forward only.
To move feet farther apart, move the binding backward. The idea is to get a little further back to improve piste performance on bends and float on powder snow. 
For freestyle boards (symmetrical): 
best to keep both bindings centred on the board.

How do I change my stance on the board?

For a freeride run, +18° at the front and 0° at the rear is recommended. For a versatile freestyle run, try +18° and -6°. The back foot opening lets you change when riding switch. 
For pure freestyle runs, choose completely symmetrical angles such as +15° and -15°, for example.
Angle choice on bindings is a very personal thing. Don’t be afraid to check out what others are doing and try out different options. You might be pleasantly surprised!

How should I angle my snowboard bindings?

Disc bindings with 4 screws can slide along a single axis and generally have 5 possible settings. This setting is used to centre the boot on the snowboard and prevent the foot from protruding over the edge of the board to avoid falling. Make sure that your boot goes over the 2 sides of the board equally. You can also rotate the disc by 90°. In this case, the bindings cannot be centred laterally.

Remember to centre your boot on your board!

M = 22.5 cm to 26 cm
G = 26.5 cm to 30 cm

We strongly recommend trying on the bindings with your snowboard boots, as a particular size of boot can vary in volume depending on the brand.

What size should I choose for my snowboard bindings?

The Burton snowboard brand has its own system for mounting bindings, the Channel. The binding is screwed on 2 movable inserts.
Our disc makes it possible to mount this bracket on the channel.
However, the screws that come with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You will need to buy Burton screws.

Compatibility with Burton Channel boards

Snowboard Bindings

Complies with EN1077:2007 standard (class B). Lightweight In-Mold structure.

Impact protection

Head size adjustment dial, full coverage.

6 holes and ventilation channels for breathability and moisture management.

Ventilation

410 g in size M. The lightest helmet in the range.

Lightweight

Ear pads and thick hat in a brushed material.

Warmth

Ease of use

Warm, well-ventilated liner with full coverage.

User comfort

Developed for regular skiers looking for a light, comfortable, ventilated helmet that they’ll forget they’re wearing. 

Adjustable Helmet

Ventilation Zippers

Intensity

Frequency

Weight (g)

Season

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

RECCO system

Style

Detachable Visor

Fastener Type

Wedze/Quechua helmets and goggles are designed to form an complete unit and prevent gaps between the top of the helmet and the goggles.

Use the adjustment dial to secure your helmet. The dial can be easily adjusted while wearing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Tightening dial

This type of structure, known as In-Mould, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. The In-Mould construction is more sensitive to everyday impacts. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

In-Mold construction

Measure the circumference of your head (from the middle of your forehead to the top of your ears) and choose the right size. When trying on the helmet, you should not feel any discomfort. If the helmet does not have a visor, try it on with a pair of goggles: There should be no gaps between the two.

How to choose the right size and trying on your helmet

For your safety, your ski helmet must be properly adjusted:
- The head circumference must be adjusted using the tightening dial.
- The chin strap must be correctly adjusted. You should be able to fit two fingers between the strap and your skin. If it is not adjusted properly, the helmet will not protect you as it should.

Adjust your helmet once you have the right size

We recommend replacing your ski helmet at least every five years unless it has sustained a significant impact in the meantime. In the event of a strong impact, the helmet must be replaced: even if it is not visible, the internal material may be damaged and your helmet will provide less protection.

When should you replace your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, opt for a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: it is not necessary, and even discouraged, to wear a hat underneath

Helmets used for head protection when downhill skiing and snowboarding are required to meet the European standard EN 1077:2007. This standard ensures that helmets absorb shocks and are resistant to penetration. There are two categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Make sure this product is right for you before purchasing. If it is not suitable, you can return it under the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. it can be refurbished. 

Product returns (specific product: personal protective equipment).

Helmets

10 mm foam heel support: comfort and support at moderate speeds.

Easy opening/closing

Flex (3/10) is forgiving of mistakes and improves comfort.

Flexibility

EVA foam sole: 80% air insulates from cold ground.

Thermal insulation

Easy to get on. Flexible foam: maximum comfort. Thermoformable liner.

Fitting comfort

Ultralight outsole with large studs for good grip on all types of snow.

Traction

Ultralight cushioning EVA sole (80% air).

Very comfortable, these boots make learning easier and help you progress.

heat moldable liner

tightening zone

Flex

Type of Liner

Tightening Type

Laces and a blocker that is easy to use for fast tightening. The outer tightening system uses classic laces.

Quick tightening system

Adequate flex is something we strive for. It improves comfort, reduces physical fatigue, and allows you to fully enjoy your day in the snow. It helps beginners adopt the right position on the board: ankles flexed to avoid straight legs. Snowboarding demands fast reactions, and keeping knees bent is important. You don’t want to start with a boot that’s too stiff.

Boot flex/stiffness

The Flex Up enables you to add 2 out of 10 flexion points (with Flex Up, this boot has a rigidity of approximately 5/10).
This is a plastic accessory which is inserted into the tongue of Decathlon snowboard boots produced from the 2022/23 season onwards. A pocket has been included in the design to keep it in the ideal position.
The Flex Up adds stiffness: If your boot turns more limp, give it a second life.

Adding Flex Up

Foot support is essential for steering your board. The level 1 liner has 4 features:
1. Liner that can be thermoformed at home 
2. Comfort Heel Pad ankle foam 
3. 4-point liner tightening
4. Hook-and-loop tab on the top of the liner

Heel support: level 1 liner (/3)

Thermoforming is only possible in built-in ovens measuring 56 cm x 60 cm x 56 cm (22” x 23.5” x 22”) equipped with a fan mode. Do not attempt in a gas oven or small toaster oven with visible heating elements.

1. Thermoforming the liner by yourself: Warning

1. Heat your oven to 80°C in convection mode. 
2. Remove the inner soles from the liners. Place the liners on a baking sheet covered with a piece of parchment paper.
3. Wait 15 minutes.
4. Put them on with a pair of ski or snowboard socks and tighten them (not too much).
5. Put on the boots on and tighten fully. 5. Wait for 15 minutes. 
This operation can be repeated if necessary.
For use in a built-in oven (56 cm x 60 cm x 56 cm/22” x 23.5” x 22”) only

1. How to thermoform the liner yourself

Ankle padding fills the hollow under and behind the ankle, keeping the heel firmly in place.
The level 1 liner is made of a relatively soft, one-piece material with 10 mm (0.39”) thick foam ankle pads.
The goal is to provide heel-foot support that matches the boot’s performance level. In fact, the faster you go, the more energy is deployed and the more support your foot needs.
Comfort Foam provides maximum comfort.

2. Comfort Heel Pad ankle foam

4-point tightening for good foot support. It holds the foot in place around the ankle.

3. 4-point liner tightening

The top of the liner has hook-and-loop strips, enabling you to hold the tongue of the liner in place at the sides, no matter how your foot is moving. 

4. Hook-and-loop strip on top of liner

The insole of this boot is flat. It offers comfort and thermal insulation. 
If you really need added support for your foot, here’s what you can do: 
- add a sole that is pre-formed at the arch and heel area
- add a sole that can be thermoformed to your foot This is the most effective solution.

Insole

Our Ultralight sole is 100% EVA.
EVA is a very light material with 80% air. This material resists abrasion while maintaining its damping properties. It is naturally very insulating and protects you from the cold ground.
The lug tread offers excellent grip without retaining snow.

Sole: grip, traction, cushioning, and thermal insulation

1. Put the boot on. 
2. Tighten the boot. 
3. Stand up.
4. Your big toes should touch the tip of the boot without excessive pressure.
5. Bend your legs forward; your big toes should move back, no longer touching the front of the boot.

How to choose the right size

Men's Snowboard boots

100% anti-UV. Clear S1 lens to see the terrain when it’s snowing or foggy.

Sun protection

Anti-fog treated dual lens and ventilated frame.

Anti-fogging

Cylindrical lens with high-performance visual field.

Field of vision

Double-density foam and comfortable fabric.

40-mm (1.6”) wide elastic with double non-slip silicone strap.

Can be worn with prescription glasses, maximum width 145 mm (5 ¾”).

These goggles offer a good field of vision with a powerful anti-fogging treatment for skiing in good weather. Compatible with glasses.

Strap Type

Technical Lens

Compatible with prescription glasses

Weather Conditions

Field of Vision

Minimizes Fogging

glass composition

strapping

fogging treatment

Glass Category

anti-uv

With Case

Diving Mask Type

Because UV rays are harmful to eyes, all our goggles are certified 100% Anti-UV in accordance with the EN 174 Standard. Goggles are the best protective solution as they perfectly enclose the eyes preventing any direct or reflected UV light from entering.

100% UV protection

S1 is a light lens for seeing better in bad weather, fog, or snow. The lens is available with a yellow or pink tint and designed to improve terrain visibility in bad weather. However, it is still low in these weather conditions. Do not place yourself in danger in unknown or hazardous areas.


S1 lens

The Performance anti-fogging system has a double lens with a treatment on the inside. The ventilation system allows air to circulate inside the ski goggles.
For proper ventilation, do not block the air vents with a neck warmer or other material.


High-performance anti-fogging performance

Dual screen reduces condensation. Air trapped between the lenses creates a layer of thermal insulation. It reduces the thermal shock between the inside and the outside of the mask, decreasing fogging on the inner lens. The inner lens also has an anti-fog treatment.

Double lens

The cylindrical double lens is made of polycarbonate (outer lens) and cellulose polycarbonate (inner lens) cut to fit the goggles.

Wraparound lens

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Ski helmet compatibility

The G 500 Ski S1 Goggles in size L can be worn with prescription glasses with a maximum width of 145 mm (5.7”). The foam on the sides and the shape of the goggle skirt leaves room for glasses arms.

Compatibility with prescription glasses

40 mm-wide (1.6”) polyamide, polyester, and rubber elastic, 3 non-slip silicone straps.

Strap

The EN-174 European standard applies to goggles used for eye protection when downhill skiing or during similar activities, such as snowboarding. 

CE - EN-174 standard

Moisture causes fogging. To prevent this, the foam should not get damp, for example by placing the goggles on a wet helmet or a hat. Falling face down in the snow can also cause your goggles to fog up. Always dry your ski goggles overnight to get rid of any dampness so you can return to the slopes the following day with bone-dry goggles.

Avoid fogging

Chose your size according to your head size. Up to 55 cm (21 ½”) choose size S, from 56 cm (22”) up choose size L.

Two sizes

Kids' Ski & Snowboard Goggles

onlyonline

An ergonomic carry handle and wheels to easily pull the bag along.

Easy transport

Padded sides and a rigid base for excellent protection of the equipment.

Full-length two-way zips that provide easy access to the contents.

The Roll Top system lets you adjust the length of the bag to the equipment.

A compact travel bag for carrying 4 pairs of skis with poles or 3 snowboards with bindings. 

Waterproof

Number of Pockets

Type of Cover

Number of Skis/Snowboards

Foldable

Number of Compartments

Easier and more comfortable transport thanks to the wheels.
Adjust the length of the bag to the size of your equipment with the Roll Top System, then clip together the buckle.
The side handle lets you carry the bag without the wheels for small distances (stairs, etc.)
A handle built into the bottom of the bag allows you to pull it from a car trunk, for example.

Transport

We use heavy-duty polyester fabric for the outside of the bag. The component has been subjected to a battery of tests to verify its durability. These tests offer a guarantee of quality, which means that the products will last a long time.
The inside of the bag is made of a polyethylene liner that provides superior resistance to abrasion and cuts.
The side walls are foam-lined to ensure maximum protection for your equipment when handling the cover.

Durability

The wheels make it easy and comfortable to carry your kit.
They are designed to withstand long distances.

Wheels

You can also fold the bag so that it takes up minimal space. Flatten the side walls inside the bag, close it, fold it in 3, and use the side strap to make it compact.

Compact design

You can carry up to 4 pairs of 190 cm skis with their poles, or 3 snowboards with their bindings.
The small straps in the bottom of the bag secure your skis or snowboards so they don't move during transport.
You will have a bit of extra room for storing additional equipment.
And an inner mesh pocket lets you store gloves, tools, etc.

Length: 210 cm
Width: 34 cm
Height: 24 cm

Weight: 4 kg

dreamscape

Men’s All Mountain Freeride Snowboard, All Road 500