EVA fabric, 100% waterproof. 
Taped seams.

Waterproof

Compact design

S/M (360 g/13 oz) to L/XL (400 g/14 oz): put it in your bag and forget about it!

Lightweight

Comes with a bag. 
Size: 18 x 20 x 2 cm (7.1 x 7.9 x 0.8”)

Compatibility

This backup poncho shelters you from a light shower when hiking.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Frequency

Weather Conditions

sleeve length

Windproof

Pocket

Type of Length

Hood

Style

Main Material

This poncho is available in 2 sizes:
157 to 173 cm (61.8 to 68.1”) in size S/M
174 to 190 cm (68.5 to 74.8”) in size L/XL
The snap opening makes this poncho easy to get on and off.

Fit and sizing information

For complete protection, we recommend wearing waterproof rain pants.

Additional product recommendations

EVA foam is not very resistant to tearing. We increased the thickness compared to the previous version and added reinforcements in high-pressure areas.

Good to know

Technologies: This garment was subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces average rain shower conditions in the mountains.

Waterproofing 

Men's Hiking Jackets

200 g/m² insulation. Brushed knit lining. Long cuff with good coverage.

Warmth

Waterproof membrane and water-repellent outer fabric.

Zip opening for the thumb. Wrist leash so you don’t lose the mittens.

Easy dressing

Polyurethane palm and finger tips for extra durability.

Abrasion resistance

These warm, waterproof, fully-taped and clever ski mittens with long cuffs and wide zippered openings are very easy to put on. 

Maximum wash temperature of 30°C. Delicate cycle.

Condition

leash

reflective

Tightening Type

Insulation keeps hands warm. This polyester-based synthetic component traps more or less air according to its thickness. The thicker the insulation, the more air it contains and the warmer it is. These mittens have 200 g/m² thick insulation.

Will my child stay warm when playing in the snow?

Use the clip system to attach the mittens to the sleeves of their Decathlon ski suit or jacket for 1-5 year-olds.
The fun design of this accessory encourages children to attach the mittens to their sleeves all on their own! The colours combine to create animal characters.
The mittens will always be ready to put on!


How do I make sure my child doesn’t lose their mittens?

If you have don't have a jacket or a ski suit, no worries! An elastic cord inside the mittens keeps them on the child's hand.

What if I don’t have the Decathlon ski suit or jacket?

Kids Ski Gloves & Mittens

15% spandex and preformed knees for maximum comfort.

Freedom of movement

Lightweight synthetic fabric for wicking away moisture.

Moisture management

Elastic waistband and elastic at the bottom of the ankle.

Anatomic design

Pockets

With 15% spandex and preformed knees, these pants move with you. Climb, step over, crouch: there's no stopping you when you're hiking! 

reinforced area

Number of Pockets

belt height

Place of Practice

modular

Type of Bell

These pants have a slim fit that flatters your figure without restricting your movement. The elastic waistband hugs your waist, while the elastic ankles ensure a snug fit.

What's the cut of these pants?

Climb, descend, step over: your pants will follow you, without fail. Its fabric with 15% spandex follows your every move. Its preformed knees give you greater freedom to climb.

Why choose stretchy pants?

Is there anything more unpleasant than feeling damp and sweaty whilst on a tough hike? The fabric of these convertible pants saves you from this discomfort. Lightweight and synthetic, it quickly wicks away sweat. Stay dry while hiking.

Why choose breathable pants?

Easy to look after for adventurers in a hurry! Turn your pants inside out, close the zips and throw them in the washing machine at 30°C. The breathable fabric dries in a flash. Forget about ironing: from the machine to the mountain, they're always ready!

Care

Women's Hiking Pants

onlyonline

Photochromic lens -100% UV filter: perfect for sunny weather.

Sun protection

Anti-fogging

Polycarbonate lenses made from high-strength plastic.

Robustness

Wraparound shape: protects your eyes from wind, water, and snow.

Coverage

Make the most of the mountains with these full coverage, category 4 sunglasses, which offer excellent quality of vision and high-definition lenses.

Grip Zone

Technical Lens

Weight (g)

Nose Bridge Type

Glass Category

anti-uv

Case Type

corrective lense

With Case

What does the UV protection do?  
It protects your eyes from UV rays.
UV radiation is present in winter and summer, in sunny and cloudy weather, and it can be harmful to your eyes and eye contours.
The lenses are made of polycarbonate mixed with UV protection against the harmful rays of the sun (UVA and UVB).

UV protection

Tinted lens classification based on ISO 12312-1 standard: 
- Category 1: lens with a light tint for reduced sunlight. 
- Category 2: lens with a medium tint for average sunlight. 
- Category 3: dark lens for strong sunlight (sea and mountains). Between 82% and 92% visible light absorbed.
- Category 4: very dark lens, for exceptional sunlight (high mountains). Between 92% and 97% visible light absorbed.

Glare

Our lenses are made of polycarbonate, which is resistant to impacts but easily scratched.
The UV protection does not decrease if your lenses get scratched; the mirror effect is purely for aesthetic purposes.
The same goes for the colour of our tinted lenses.
Choose your glasses according to your preference—all tint colours will protect your eyes.

Women's Sports Sunglasses

Adjustable padded straps-designed for greater freedom of movement.

Carrying comfort

6 pockets - 1 water bladder (not included) compartment - pole attachments

Multiple compartments

Capacity

This hiking backpack weighs just 780 g (1.7 lb).

Mesh net back for better ventilation between the back and the backpack.

Ventilation

This backpack is not waterproof (rain cover included).

Technical and light. it's ideal for hiking or  traveling.

Volume (L)

Height (cm)

Depth (in cm)

Frame

carrying comfort

adjustable height

water bladder included

Options

Foldable

Width

Number of Compartments

Fastener Type

The MH 500 Light Hiking Backpack is designed so you can carry everything you need. 
It has: 
- 2 pockets on the shoulder straps, including 1 zippered pocket for safely storing your phone 
- 1 main compartment (rolltop zipper) with an inside zippered pocket 
- 1 large front pocket 
- 2 side pockets
- 1 pocket for a water bladder (not included) 
- Pole attachments 
- 1 front elastic to hold a jacket 
- 1 rain cover

What are the features of the MH 500 Light Hiking Backpack?

This backpack is designed to provide maximum comfort when walking. 
This backpack has a mesh back as well as foam straps. This system provides better ventilation between your back and the backpack. 
The design also makes walking more comfortable because the backpack moves with your back and hips.

What makes this backpack so comfortable?

To improve your hiking experience, we added a few features to this hiking backpack. First, it is equipped with a rolltop opening. You can adjust the size of the backpack depending on how full it is. 
The belt can also be stored when you do not need it.

What makes the MH 500 Light Hiking Backpack so compact?

It’s so comfortable you’ll forget you’re even wearing it. The MH 500 Light backpack weighs only 780 g (1.7 lb).
This lightweight backpack has a 22 L capacity. 
You can pack everything you’ll need.

What makes the MH 500 Light Hiking Backpack so light?

This hiking backpack is 49 cm (19.3”) high, 26 cm (10.2”) wide, and 21 cm (8.3”) thick.

What are the dimensions of the MH 500 Light Hiking Backpack?

Here’s how to put on your backpack.
1 - Loosen all the straps (shoulder straps, belt, load adjuster straps).
2 - Put the backpack on.
3 - Tighten the shoulder straps.
4 - Adjust the load adjuster straps as needed.

How to adjust your MH 500 Light Hiking Backpack

The MH 500 Light hiking backpack is ideal for all your mountain hikes.
Over time, the tent will age, and some parts may wear out or break.
To help with repairs, we make the most common parts easy to replace.
Find all the information in the after-sales card. 

Don’t throw it away, repair it!

Can the MH 500 Light Hiking Backpack be repaired?

At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we recommend its repair, replacement, or a refund. The guarantee covers the components from the zip to the seams: more information can be found on our website.

Quechua backpack: 10-year warranty

Laptop Backpacks

Waterproof coating 5,000 mm (Schmerbers) | Taped seams

Zipper at the bottom of the legs makes them easier to put on with shoes.

Hydrophilic coating (RET = 12): reduces condensation in the garment.

Breathability

Lightweight, compact top-layer pants | Weight: 200 g (7 oz.) in size L 

Designed for occasional hikes on easy trails in rainy conditions.  

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Precipitation

Customization

Schmerber

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water pressure (Schmerbers) before washing (equivalent to the pressure exerted by a 5-metre column of water).

Water resistance (fabric)

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric’s resistance, the more perspiration can escape, and the higher the fabric’s breathability. 
RET < 9: extremely breathable fabric
RET < 12: very breathable fabric
RET < 20: breathable fabric
RET > 20: little or non-breathable fabric.

Fabric breathability

The fabric for this jacket is water-repellent: water slides off its surface. In this way, the fabric doesn’t soak up water and stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Our water-repellent coatings are now perfluorocarbon-free. As a result, this model will be sold with a more environmentally friendly water-repellent treatment.

Your health is our top priority

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain waterproofing over time

How much you perspire depends on the intensity and duration of your physical activity.If the fabric isn’t breathable enough for the type of activity/exercise, your perspiration will condense inside the item.The jacket will feel damp inside. This dampness is not rain soaking through but condensation caused by perspiration. This means you need to choose top-layer pants suitable for your activity.This product is designed for 2-hour hikes at no more than 5 km/h (3 mph).

Choosing waterproof rain pants based on physical effort

For full-body protection from the wind and rain, we recommend the Raincut 1/2 zipper or full zipper men’s jackets.   

Other recommended products

Men's Hiking Pants

Wadding filling: 200 g/m² (body), 150 g/m² (arms). Comfort: -10°C, limit: -30°C.

Waterproof membrane 15,000 mm water (Schmerber). Fully taped seams.

Adjustable hood. Elastic inner waistband. Wrist cuffs.

Limits snow entering

Central zipper pull with a double slider means you can bend or sit down.

Easy opening/closing

3 secure flap and zippered pockets and 1 mesh pocket.

Warm and waterproof with a slim cut, this parka is ideal for your hikes and everyday outings. 

Season

comfort temperature

Membrane Construction

Lining Material

type of waterproofing

type of hood

thumb pass

This parka was developed for winter conditions such as cold, snow, and wind. Thick synthetic padding traps air and provides insulation.
A long inner flap beneath the zipper keeps cold air out. The toggle at the hem ensures your parka is comfortable.

Is my parka warm enough for winter hikes?

The parka has a waterproof material that keeps out water and wind. To stay warm in winter, you must also protect your extremities (head, hands, and feet). The covering hood, cuffs, and stand-up collar all help to keep out the cold. The comfortable, fleece-lined handwarmer pockets protect your hands.

How does this parka protect you from outdoor conditions?

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerber or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric.
This jacket is made from waterproof material (JIS 1092 standard) resistant to 15,000 mm (Schmerber) before washing. This waterproof parka protects you from a downpour, i.e., 12 cm of rain in 2 hours.

Waterproofness

Practical, smart details: 2 hand warmer pockets, 1 secure inner pocket, and 1 mesh inner pocket to keep your belongings handy. 
The main fastening has a long zipper pull with a double slider to ventilate your parka when you’re wearing it. Also very practical for bending down, sitting comfortably, or cycling.

A practical parka with smart details

This parka is designed to be worn with a warm second layer like a fleece or a light down jacket.
The longline style is ideal for protecting you from the cold and wind during winter hikes in hilly areas or in the mountains.
This lightweight parka is comfortable in every situation.

A comfortable, lightweight parka

Durability tests are conducted on selected components: resistance to rubbing and abrasion, colourfastness, and resistance to repeated washing. All these tests have been conducted on the jacket material.

Will this parka withstand regular use long-term?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of your parka

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

Women's Hiking Jackets

Less friction and heat with the double thickness design.

Fitting comfort

100% water-repellent synthetic fibre fabric to keep your feet dry!

Anatomical shape (R/L) and 100% elastic structure for foot support.

Durability

These high, double thickness hiking socks are designed to reduce rubbing in your shoes. 

Sports/

Sport Accessories/

Bags/

Lunch Boxes/

quechua

Stainless Steel Insulated Bottle with Cup, 0.4 L