Head size adjustment wheel. Bowl design for more stability.

Stability

12 holes to aerate and evacuate humidity.

Ventilation

ABS construction type, 520 g (1.1 lb) in size M.

Lightweight

Complies with EN1077:2007 standard (class B). ABS shell.

Impact protection

Inner hat with large mesh surface for good thermal regulation.

Warmth

This robust helmet was designed for snowboarding and skiing, particularly freestyle. 

Adjustable Helmet

Ventilation Zippers

Condition

Skill Level

Frequency

Weight (g)

Season

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

RECCO system

Style

Detachable Visor

Fastener Type

The standard EN 1077:2007 category B is a European standard that applies to helmets used for cranial protection during downhill skiing or snowboarding. This standard tests the ability to absorb shocks and resist penetration.

A rigorous standard for protections

The Turnring is essential to the support of your helmet. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

A practical adjustment wheel to adapt the helmet to fit you

The venting system improves the thermal regulation of your helmet and reduces fog in your goggles. This type of design lets heat and humidity escape from the entire helmet and goggle area.

Passive ventilation system

The hard shell construction makes the helmet more durable and robust. The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. Change your snowboard helmet at least every 5 years, even if it hasn’t sustained any impacts.

Hard shell construction

Avoid putting a thick hat under your child's helmet as this will move the helmet away from their head and they won't be as well protected. 
Opt for a very thin beanie or balaclava. Helmets have good insulating properties. Often, nothing else is needed. Do not attach a camera to the helmet, as the extra weight can affect safety. The standard does not take into account any elements added to the helmet.

Safety

Make sure this product is right for you.
If not, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging. 

Product returns (specific product: personal protective equipment).

The size of the FS 300 helmet is slightly different from other Wedze helmets. It’s a bit shorter at the forehead. Check when trying them on.

Sizing

Helmets

This one-size case can be used to protect all ski goggles.

Compatibility

Easy maintenance

Wide opening makes it easy to store or remove your goggles.

Easy opening/closing

The lens of your ski goggles is never fully scratch-resistant but using this case provides the proper protection.

With Protection

Number of Pockets

Type of Cover

Weather Conditions

Waterproof

Foldable

Number of Compartments

Main Material

Remember to protect your goggles and the lens from scratches by using the microfibre Wedze case before and after use. The material is perfect for keeping your ski goggles scratch-free. This case also cleans your lens!

Microfibre case

Compatible

Kids' Ski & Snowboard Goggles

Back and hand: 200 g/m² insulation, palm: 80 g/m², synthetic fur lining. Cuffs.

Waterproof membrane and water-repellent outer fabric.

Covered fingertips for better durability.

Abrasion resistance

Keep your hands warm with these ski gloves. Equipped with a cuff to prevent snow and air from entering, they leave the cold at the door. 

Maximum washing temperature 30°C. Normal cycle.

Glove Type

abrasion 

Reinforced Palm

To Bring Warmth

Stitching Type

Windproof

leash

Tightening Type

All our gloves and mittens have a water-repellent treatment that means their fabric does not absorb water, but instead ensures it slides across the surface. As a result, the fabric does not become saturated with water. It remains light and warm. A fabric becomes water-repellent thanks to a treatment applied to its outer surface. To remain effective, this treatment must be reapplied every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier to water and makes the product waterproof. In addition, the outer materials of the product benefit from a water-repellent treatment that reduces water absorption. Only a rubber glove is watertight. A glove with a membrane, under extremely damp conditions, will have limited waterproofness.

Waterproof membrane

All our gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold.

Windproofing

A special cuff has been built inside the 500 gloves. This soft and comfortable cuff keeps out draughts and snow from getting into the glove when it’s windy or in case of a fall. Extra warmth.

Airtightness

Simply pull the wrist-strap with the opposite hand for speedy and effective adjustment.

Easy to put on

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Loss prevention system

Snowboard Gloves & Mittens

10,000 mm (Schmerber) membrane, taped seams.

Insulated with synthetic loose fibres, for use in temperatures as low as -6°C.

Breathable fabric and ventilation strip on the back

Breathability

You can wear this versatile jacket for all of your outings whatever the weather thanks to its synthetic fibre insulation, soft collar and ventilation.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Snow Skirt

type of lining

reinforced area

sleeve length

Membrane Construction

Pocket

type of waterproofing

type of hood

thumb pass

breathability (in RET)

Type of Length

Removable Hood

Hood

Zipper Type

Schmerber

The waterproof zippers, snow skirt, high collar, and adjustable hood and cuffs offer superior insulation to keep you warm.

In addition to the padding, which components provide warmth?

The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This component prevents water from seeping in while wicking away perspiration. The membrane is unbeatable when it comes to keeping you warm and dry.

What is a membrane and what does it do?

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a water resistance of 8,000 mm therefore withstands the pressure exerted by 8,000 mm of water.

How is the water resistance of a jacket measured?

The 500 jacket is made of sturdy, water-resistant materials that reduce wind chill for better protection against the elements. To check its waterproof rating, this jacket was tested under a special shower test that replicates the conditions skiers face. This jacket’s waterproofing was field-tested in various weather conditions for several days.

Which parts of the jacket protect me in bad weather?

Water repellency is a material’s ability to let water bead off the surface without being absorbed. This jacket features water-repellent components that improve its weather resistance. The exterior surface of the fabric is treated to make it water-repellent.

What is the water-repellent feature of my jacket for?

Bear in mind that the water-repellent feature can be reactivated. To do this, you can use a waterproof spray (sold in our stores): spray the product evenly over the entire item, then allow to dry for 10 to 12 hours.

How to reactivate your jacket’s water repellency

This jacket wicks moisture away. To determine a fabric’s breathability, we measure its resistance to evaporative heat (RET) based on a standardized ISO 11092 test. The lower the RET, the more breathable the fabric.The 500 ski jacket has a RET of 11. However, it is Wedze’s technical solutions (zippers, vents, mesh) that reduce condensation and maximize breathability.

What is a breathable jacket?

Slim fit. The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

How does the 500 ski jacket fit?

To stay warm and dry, we recommend using the 3-layer technique: 
- Layer 1 or second skin, to stay dry. 
- Layer 2 or insulating layer, to keep the heat in.
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

The snow skirt adjusts automatically, and adjustable cuffs block drafts and snow, especially in the event of a fall.

Keeps snow out if you fall

* Close all the zippers on the jacket.
* Turn it inside out.
* Machine wash at 30°C on the delicate cycle with little detergent and no fabric softener. 
Important: Use a gentle/delicate spin cycle (less than 800 rpm). Spinning too fast may create clumps that are difficult to undo.

How should I wash my jacket?

Tumble dry (strongly recommended). 
* Gentle or delicate cycle. 
* Dry on several long cycles to dry completely. * If you do not have a dryer, it will take longer to dry (drying flat can take 1 to 2 weeks). Make sure you pat the jacket to avoid any lumps.

How to dry your jacket

This product is repairable. Solutions may be offered to you in-store. If we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Chest: 85 cm (33.5 in)
- Arm: 57 cm (22.4 in) (from shoulder to wrist)
- Waist: 67 cm (26.4 in)
- Inside leg: 83 cm (32.7 in)
- Hip: 99 cm (39 in)

To help you choose the right size

Women Ski Jackets

clearance

Complies with EN1077:2007 standard (class B). Lightweight In-Mold structure.

Head size adjustment dial, full coverage.

6 holes and ventilation channels for breathability and moisture management.

410 g in size M. The lightest helmet in the range.

Ear pads and thick hat in a brushed material.

Ease of use

Warm, well-ventilated liner with full coverage.

User comfort

Developed for regular skiers looking for a light, comfortable, ventilated helmet that they’ll forget they’re wearing. 

Intensity

Wedze/Quechua helmets and goggles are designed to form an complete unit and prevent gaps between the top of the helmet and the goggles.

Use the adjustment dial to secure your helmet. The dial can be easily adjusted while wearing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Tightening dial

This type of structure, known as In-Mould, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. The In-Mould construction is more sensitive to everyday impacts. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

In-Mold construction

Measure the circumference of your head (from the middle of your forehead to the top of your ears) and choose the right size. When trying on the helmet, you should not feel any discomfort. If the helmet does not have a visor, try it on with a pair of goggles: There should be no gaps between the two.

How to choose the right size and trying on your helmet

For your safety, your ski helmet must be properly adjusted:
- The head circumference must be adjusted using the tightening dial.
- The chin strap must be correctly adjusted. You should be able to fit two fingers between the strap and your skin. If it is not adjusted properly, the helmet will not protect you as it should.

Adjust your helmet once you have the right size

We recommend replacing your ski helmet at least every five years unless it has sustained a significant impact in the meantime. In the event of a strong impact, the helmet must be replaced: even if it is not visible, the internal material may be damaged and your helmet will provide less protection.

When should you replace your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, opt for a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: it is not necessary, and even discouraged, to wear a hat underneath

Helmets used for head protection when downhill skiing and snowboarding are required to meet the European standard EN 1077:2007. This standard ensures that helmets absorb shocks and are resistant to penetration. There are two categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Make sure this product is right for you before purchasing. If it is not suitable, you can return it under the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. it can be refurbished. 

Moisture management

Good: brushed polyester component. 210 g/m².

Designed for medium-intensity skiers (moderate sweat) in cold weather.

belt height

Reversible

Place of Practice

The BL 500 ski base layer has a standard straight cut that adapts to all body shapes. It’s not too loose, so it keeps in the heat effectively.

Polyester is the most commonly-used fibre for base garments because it is relatively inexpensive and offers excellent performance in various respects, and especially because the fibres can be knitted to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.

Benefits of polyester

During the warranty period, solutions may be offered to you in-store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Waist size 67 cm (26.4 in)
- Inside leg length 83 cm (32.7 in)
- Hip measurement 99 cm (39 in)

Ski Leggings & Tights

Good: bodymapping for effective moisture transfer and fast drying.

Average: bodymapping integrated into a brushed component (165 g/m²).

Seamless technology: fewer seams to reduce irritation.

Reduced chafing

The component limits sweat odours. 
Lab tested to ISO 17299-3 standard.

Odour control

Hit the slopes without worrying about the cold and damp! A breathable base layer that prevents the sauna effect while you’re out doing moderate exercise. 

Collar Type

anti-uv

The BL 500 soft thermal base layer comes in a slim fit. This slim-fitting base layer reduces friction.

Polyamide is the strongest of all raw textile materials, even when wet, and it is very stretchy.
This breathable fibre manages moisture very well and provides good temperature regulation.
These specially textured, super-soft yarns give the fabric a silky, natural feel. Ideal for tight, seamless clothing.

What are the benefits of polyamide?

Thanks to its bodymapping technology and brushed polyamide fibre created with I-Soft technology, this second skin will evenly distribute body heat.

Technical product structure

The I-Soft technology enhances the fabric’s performance, providing a variety of benefits: softness, warmth, and comfort. It also enhances garment performance, providing better heat regulation, humidity absorption, and thermal insulation. To achieve this softness, the base layer is brushed.

What is I-Soft technology?

The I-Band technology is an innovative design used around the waist of the I-Soft top and bottom base layers. It helps keep the garment in place so that it doesn’t ride up or fall down when skiing.

What is I-Band technology?

You need three technical layers to keep warm on the slopes:
- Layer 1 or a second skin, to stay dry. 
- Layer 2 or an insulating layer, to keep the heat in.
- Layer 3 or a protective layer to protect against the elements.

We commit to repairing your product free of charge for the duration of the warranty. If you need seams, zippers, or another element repaired, contact your store. 
However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

wedze

Fine Weather Interchangeable Ski Goggles, G 900 C HD