Comes with a screw to hold the beach umbrella tube in place.

Ease of use

Spike fits beach umbrella bases between 2.3 and 3.5 cm in diameter.

Adjustable

Corrosion resistance

The must-have tool to secure your beach umbrella. The new double handle makes it easier to screw into the sand.

Skill Level

Adjustable Length

Length: 36 x 18 cm
Diameter for beach umbrella base: 2.3 cm to 3.5 cm (For large diameters, remove the rubber part).
Fits most beach umbrellas.

Dimensions

Screw the spike into the sand in its entirety (only the handles should be sticking out of the sand), then insert the beach umbrella base and tighten the fastening screw. Check that stand is secure in windy weather. If not, do not use.Do not use in soil or ground other than sand.

Women's Clearance

The turned-back inside seams reduce skin irritations caused by rubbing.

User comfort

This inflatable swim ring is suitable for kids aged 3–6 years discovering the water and moving around in it for the first time. 

Difficulty Level

bladder

Condition

pattern

Number of Pockets

Sportsperson’S Weight

Inflatable

Diameter (cm)

With Handle

Pocket

Number of Users

Style

Main Material

There are 3 stages of discovering water:
- Familiarization: build trust and overcome fear through fun games. The child gets used to water.
- Immersion and breathing: hold your breath to feel safe and put your head under water.
- Floating and moving: develop competence and learn how the body behaves in water before moving around alone.
A progressive, fun-filled course for a successful introduction to water!

The stages of aquatic awakening

Inside diameter: 19 cm (7.5")
Exterior diameter: 51 cm (20")

Two separate inflation chambers for added safety and stability.

Safety

Not suitable for kids weighing over 30 kg (66.1 lb).

Use restrictions

Our kids’ pool ring has PVC one-way inflation valves.
To inflate the product correctly, press the base of the valve to open it.
The valve closes mechanically in about 2 seconds. As such, it is normal for a bit of air to escape after inflation. This is why you must close the cap quickly.

How does the valve work?

There could be a valve malfunction: the valve is not closing normally or too much air is escaping before the cap is closed. To readjust it to the correct shape, pinch the valve 2 or 3 times with your fingers, then inflate the product to the maximum and close the cap. The flap should resume its shape.

What if the product deflates after I inflate it?

After use, always rinse the pool ring with clear water to remove chlorine, sand, or salt.
To avoid premature discolouration, store your pool ring out of sunlight when not in use.

Recommendations for use

Product weight

Swim Belts & Vests

2 grips. Do not wax. Leash not included, but can be purchased separately.

Ergonomic grip

Compact. Inflation by mouth. New push-button valve.

Compact design

Weight: from 15-25 kg.Do not overinflate. Deflate after use, store in shade.

Stability

Padded glide surface. Do not overinflate. Not suitable for adults.

Glide performance

Designed for children between the ages of 4 to 8 who are just getting used to the waves. For navel-deep water.

Intensity

leash

Board Type

Wave Size

To help you catch more waves, we are working to make our products as intuitive as possible and to incorporate instructions.
That's why this bodyboard has carefully placed handles that allow you to effortlessly get into the right position.
Pictograms on the bottom of the bodyboard illustrate each of the key steps to catching waves.  A QR code gives you access to tutorials and other useful information:care, 2nd life, etc.

User-friendly and educational.

The size of the bodyboard directly influences its stability and ease of handling. It should be tailored to the size of the user. This bodyboard is designed for children aged 4 to 8, who weigh between 15 and 25 kg (33.0–55.1 lb).
A board that’s too small won’t float properly, while a board that’s too big will be difficult to handle.
Refer to the size chart to help you choose.
Not suitable for users over 40 kg. Only use where a lifeguard is present.

How to choose a bodyboard size?

- Novices: Designed for catching small waves (< 50 m/19.7 in) in shallow water below navel level. Push off the ground with your feet and ride the wave to shore.
- Beginner: Gentle turns in waves up to 1 m (39.3 in), propulsion with fins. A must for learning to bodyboard.
- Intermediate: Waves up to 1.50 m (59.0 in), more speed, while learning tricks (360 °, El Rollo, etc.).
- Advanced: All types of waves, proficient doing tricks, even aerial: ARS, 360°, tube...

We design products according to 4 levels of experience.This board is ideal for novices.

This bodyboard is inflated by mouth. Inflate gently; an overinflated bodyboard will not glide as smoothly and could become damaged if exposed to strong heat.You should lie flat on the bodyboard when catching a wave. Make sure to wear a long-sleeved rash guard or wetsuit to prevent chafing. 
For added comfort, push the valve into the bodyboard once inflated.

Safety tip

Designed to catch and ride ocean waves in shallow water, where the water reaches up to a child’s navel while touching the bottom. As a small broken wave passes (< 50 m/19.7 in), the child pushes off using their feet, aiming towards the beach, and lies belly down on the bodyboard, gripping the handles, arms bent, and legs outstretched behind them. No fins necessary. Comfortable for bare skin. No wax required.

How to catch a wave

Warning! Risk of injury due to the functional characteristics of this product. Small parts - Danger of suffocation. Only for use with adult supervision in shallow water where the child can touch the bottom. Pay special attention when there is wind or strong currents. Safety equipment such as buoyancy aids or armbands are strongly recommended. Not suitable for children aged 3 and under. A leash can be added. Sold separately.

To keep your bodyboard in good condition, do not: 
- Jump onto it in a swimming pool. 
- Leave it inflated in direct sunlight or in temperatures above 30°C (deflate after use). - Leave it in a car in direct sunlight.
- Before entering the water with your bodyboard, make sure it is in good condition, that none of its joints or seams are damaged, that the valve is fully closed, and that it does not deflate.

Keeping your inflatable bodyboard in good condition

It’s normal for the bodyboard’s air pressure to drop throughout the day or when you put it in the water. When there is a drop in temperature, air pressure decreases: If this happens, it's okay to reinflate it.
After inflating, it’s not normal for your bodyboard’s air pressure to drop significantly during a session. If this happens, make sure your plug is closed tightly.

What if the bodyboard deflates?

Only use this product under prescribed conditions. Do not use inappropriately. 
If, despite normal use, the plug doesn’t stay in place or air can be seen escaping from the seams, the warranty is valid for two years.


What if air leaks are apparent or the plug doesn’t stay in place?

Valve leaks are generally caused by sand that needs to be removed.
Partially deflate the bodyboard and let it dry to make it easier to remove any sand.
Use a pump to blow into the valve and remove the grains of sand by pressing the button (blowing by mouth might work, but could make the sand wet).
No matter what, the plug must remain airtight.

What if the valve leaks?

Inflated: 70 cm x 50 cm x 12 cm (27.6 x 19.7 x 4.7 in)
Deflated: 15 cm x 15 cm x 4 cm (5.9 x 5.9 x 1.6 in)

Dimensions and weight

Bodyboards & Inflatable Bodyboards

Flexible material with a rounded shape to reduce noise and absorb shocks.

Cushioning

100% rubber material with a knobby pattern for grip and traction.

Grip

Designed to last. Abrasion- and perforation-resistant rubber. 

Durability

They fit Quechua and Forclaz poles. Do not come off while walking.

Compatibility

Red so that it's easily spotted if it comes off Knobby pattern indicating wear

Prevents the tip of the pole from causing injury or damaging belongings.

Content protection

Weight

Designed to protect a hiking pole tip from wear during repeated impacts on the ground.

Frequency

Playing Surface

Entirely designed and validated during a one-year collaboration with 14 users, from the drafting of the specifications to the prototype validation tests, including the choice of the colour.
Thank you to Serge, Evelyne, Olivier, Thomas, Perrine, and everyone else!

Design

In addition to its durability, the rubber material of this cap has a higher grip coefficient on hard ground (road, stones, tree roots).
The V-shaped knobs are designed to provide good grip on soft ground (dirt, mud).

Our other technical choices

Push the cap forcefully onto the tip so the flexible material adapts to the tip. It is important to hit the ground hard 2 to 3 times to ensure full insertion.
The grip on the pole tip has been designed so that the cap does not come off easily when walking. The grip is best on a clean tip but decreases if there is any dust or moisture on the tip.
To remove it, pull it off with a twisting motion. This will make it much easier to remove.

How to fit this cap on Quechua and Forclaz poles

Hiking Poles & Walking Poles

Straight handle with flexible foam. Pommel on the top. Wrist strap.

Easy-to-use, reliable pushpin system (push button). 105/110/115/120 cm (41”/43”/45”/47”)

3 telescopic sections. Collapsed length: 55 cm (22”). Collapsed width: ~5 cm (2”).

6061-T6 aluminum tubes. Large tube diameter 20/18/16 mm (0.8”/0.7”/0.6”). Steel tip.

Integrated summer basket, non-removable. Non-replaceable tip.

This pole is designed to help you to walk safely on flat and landscaped ground.

Adjustable Walking Pole

Grip Type

Wrist Strap Type

Collapsed Length

Tip Type

Handle Covering Material

Number of Part(s)

Suspension

Walking Stick Type

handle length

shape of handles

With Wrist Strap

Designed and validated by our team.
Why have we chosen the push pin? We want to make adjusting your poles easy. This system is simple, reliable, light, and cost-effective.

Why oversized tubes? Because this model is designed for walkers who want a reliable pole. Why a straight foam handle? Because our field tests have shown that foam is more comfortable than a plastic handle.

While holding the grip of your pole, your arm should bend at a 90-degree angle.
To do this: 
Pull on the lower part until the automatic push-pin system locks into place.
- Slide the tube from the middle until the upper push-pin reaches the desired hole. 
- Use the line printed on the lower tube to align the button with the holes.
Never go past the "Stop" line to avoid breaking the pole.

How to adjust your poles to the correct length

This hiking pole is designed to help you balance, propel yourself, and distribute weight between your arms and legs.
For safety, make sure your pole is locked in place with a few firm taps, both before you leave and at regular intervals. Don’t put it on your backpack in a storm.
Some users are sensitive to the whistling noise that can occur when the wind sweeps through the adjustment holes.

Directions for use

Proper maintenance of your pole will ensure that it functions optimally and that it lasts longer.
After use, if water has penetrated the pole, remove the strands and allow them to dry. If necessary, clean the dust or mud with water or a dry brush. Once dry, you can reassemble the strands.
Do not oil or grease the mechanisms.

Care instructions

Decathlon sells hiking and trekking poles individually. This is because they are used in different ways. Some people prefer to use only one pole. If someone uses a pair and one pole breaks, they can replace one broken pole without having to buy a new pair.

Why is the pole sold individually?

The advantage of buying Forclaz hiking poles is that you have a wide choice of compatible accessories and spare parts. This lets you enjoy it for as long as possible.
Hiking Pole Tips: ref. 8580865.
Lower section for MT 500 Hiking Pole: ref. 8648384

Accessories sold separately and adapted to this product

Sun protection

Wind resistance

Do not wash.

Do not dry clean.

Do not iron.

Do not tumble dry.

Bleaching excluded.

Weight: 1.6 kg (3.5 lb) 
Diameter: 190 cm (74.8 in) 
Surface area: 2.8 m² 
8 ribs.
4-part pole.
This anti-UV ParUV 190 parasol stores in its bag (included). Bag: 72 x 24 cm (28.4 x 9.4 in).Cover size with the sunshade inside: 60 x 20 x 13 cm (23.6 x 7.9 x 5.1 in).Diameter at base: 2.5 cm (1 in).
Fits 3 adults.

UPF 50+ fabric blocks at least 95% of UVB and 98% of UVA rays. We have updated the shade’s “Enduction” interior coating. It is now clear for optimal protection and available for all colours.
This new coating allows us to use less energy during production. 

Sun protection and new inner coating

This beach parasol is UV-resistant, but it doesn’t provide total sun protection. Consider other factors such as reflections from water or sand, heat, and time of day.
You should also wear sunglasses, a hat or cap, a UV-protective top (see our range of UV-protection clothing), regularly apply suitable sun screen, and drink plenty of water.

Sun exposure advice

The ParUV 190 sunshade withstands winds up to 20 km/h.
Using the orange spiral base (purchased separately) can increase the wind resistance by an extra 10 km/h. This can be purchased separately on our website. 

All our anti-UV parasols can be inclined at 35° and 50° with the Tilt Incline ParUV accessory.Sold separately and exclusively through Decathlon.

Tilt accessory sold separately 

For product advice and information (instructions, repairs, etc.) and sun protection tips, scan the handy QR code on the cover.

Sports/

Sport Accessories/

Safety & Protection/

Sun Protection/

decathlon

3-Person UPF 50+ Beach Umbrella, Paruv 190