clearance

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Compatibility

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Tire Assembly

Skill Level

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

Mesh inserts (ultra breathable fabric) on the sides.

Breathability

Enter the world of performance with a jersey that’ only 129 g (4.6 oz) in size M

Lightweight

Elastic sleeves and hem at the back provide a snug fit.

Stability

Back: 3 regular pockets and 1 zippered pocket. 
Sides: 2 pockets for trash.

Pockets

This cycling jersey is part of the Racer range from Van Rysel. It's designed for male and female cyclists who want technical features and performance.

Maximum washing temperature 30°C. Normal cycle.

Collar Type

Season

Number of Pockets

Weather Conditions

sleeve length

anti-uv

Pocket

Style

Main Material

Introducing the new version of our Racer jersey. It's even lighter and more breathable than the previous version, making it perfect for your training rides and races! 

Our starting point was clear: we wanted a dedicated performance jersey that wouldn't compromise on either breathability or aerodynamics.
Mission accomplished with the 2nd-generation Racer jersey!

The 2nd version of our go-to racing jersey!

This jersey is unisex! 
The materials and pattern used will fit absolutely any body shape, male or female. 

The cut is close-fitting for a second-skin effect. 
The lightweight elastic hem and its silicone band hold the jersey in place, no matter your hip width.

Unisex jersey

For this jersey, we've chosen ultra-light materials that keep you really comfy. 
Most of this jersey is made from a fabric called Amigo, which is extremely breathable and lightweight. 

The sides and arms are made from mesh to let plenty of air through and keep you nice and cool.

An extremely light, breathable jersey

Ride outdoors in even the hottest weather without feeling damp from sweat. 

We've used a thin, breathable, anti-UV fabric on the front and back of the jersey to keep you cool, comfortable, and protected from UV light.

Ultimate comfort for seasoned cyclists

Every technical aspect of this jersey has been designed to take you to the next level under the best conditions:
- Ventilation: mesh sides and sleeves.
- Pockets: 4 back pockets, including 1 with a zipper.
- Trash pockets: 2 trash pockets on the sides.
- Support: elastic at the waist and wrists for an excellent fit.- Length: shorter to stop it creasing at the front when you're in a racing position and sagging at the back when your pockets are full

Design choices that make a difference

The Pro Fit cut is designed for sport cyclists who want something close-fitting.
This aerodynamic cut gives you a second-skin effect that boosts performance.
The Racer range also features sleeves that cover most of your biceps.
Unisex jersey that fits both men and women.

If you want to get this Racer jersey but prefer a slightly looser fit, we recommend buying the next size up.

Pro Fit

Machine wash at 30°C. Synthetic cycle. Turn the garment inside out. Use minimal laundry detergent. Do not add fabric softener. Hang-dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry. 

Care instructions

Men's T-Shirts & Tank Tops

Moisture management

Very close-fitting cut with silicone thigh bands

Lightweight design: 170 g (6 oz) in size M

Designed for performance-minded cyclists who ride in warm to hot conditions (15–35°C).

reinforced area

retaining strip

belt height

Reversible

Stitching Type

Type of Length

Zipper Type

The idea behind the RCR bib shorts is to create high-performance cycling shorts that provide just the right amount of compression while giving you plenty of freedom to move as you ride.
Whether you’re heading out for a quick spin or a long-distance effort, these cycling shorts offer consistent performance without compromise.

The ultimate competition cycling shorts

This Performance-level pad offers a more anatomical fit and improved protection across the pelvic area. Perforations on the top improve breathability, while firm high-density foam beneath the top layer boosts comfort and support for up to five hours in the saddle on long-distance rides. Rhombus fabric helps prevent bacterial growth.

Elastic Interface ® RCR 2.5 HD pad


Dimensions: L: 360 mm (14.2 in), W: 180 mm (7.1 in)
Composition: 
Rhombus 75% PA; 5% PL; 20% EA
D60 foam (60 kg/m3 polyurethane foam) 
D120 foam (120 kg/m3 polyurethane foam).

Elastic Interface® pad size and composition

Machine wash at 30°C. Synthetic cycle. Turn the product inside-out.Use only a small amount of detergent.Do not add fabric softener. Hang-dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry. 

Men's Sports Shorts

EN 1078 certified with Mips® Air Node for enhanced angled impact protection.

Impact protection

Features 8 air inlets connected to 7 outlets via channels.

Ventilation

Incorporates in-mould technology for lightweight construction (280 g in size M).

Built with a turn-ring system for a micrometric occipital fit.

Anatomic design

Aerodynamics

Compatible with long hair. Can accommodate a braid.

Designed for your sport rides. Lightweight and ventilated, this is the helmet of the Decathlon AG2R La Mondiale team for mountain racing.

Adjustable Helmet

Intensity

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Detachable Visor

Fastener Type

RCR stands for Racer. This line of products is designed for cyclists looking for the best equipment. Versatile and uncompromising, it delivers excellence on all terrain, from flat sprints to mountain ascents.

Trusted by the Decathlon AG2R La Mondiale professional team.

The Mips® Air Node system is designed to protect against rotational impacts. In the event of an impact, particularly an oblique one, your head may rotate suddenly and violently, which is a common cause of concussions.

Mips® Air Node is an integrated, discreet layer that lets the helmet move slightly relative to your head. The system stays fixed during normal use, releasing on impact to dissipate rotational energy and reduce the risk of injury.

Mips® Air Node: safe, lightweight, and ventilated

Air Node is the most advanced protection solution from Mips®.

Benefits include:

Lightweight and well-ventilated: perforated and designed not to impede airflow.
Comfortable, with no pressure points.

Smart protection: only activates upon impact to deflect rotational forces.

Why Mips® Air Node

Because safety comes first, this helmet meets the highest impact standards and 

complies with European regulation EN1078. 
The standard covers construction (including field of vision), shock absorption, retention system features (including chinstrap and tightening devices), and marking and information.

Security

The size of a helmet is based on your head circumference. 

RCR:
Size S: 52–55 cm | 240 g (20.5–21.7″ | 8.5 oz)
M: 55–59 cm | 280 g (21.7–23.2″ | 9.9 oz)
L: 59–62 cm | 300 g (23.2–24.4″ | 10.6 oz)

Note: This helmet features the Mips system, which slightly affects sizing. If you’re at the upper end of a size range, we recommend choosing one size up.

Size and weight

Optimal ventilation occurs when large air inlets connect to exit channels that let the air flow freely. The head is an essential component for cooling the body during intensive effort.

The evacuation of the heat generated is thus a priority for maintaining a high level of performance.

Poorly placed vents can greatly increase drag and reduce aerodynamic performance.

The RCR has a variable ventilation system depending on your position on the bike. For example, when climbing a slope, the straighter up you are, the more effective the system. As soon as you tip down for a descent, the aerodynamics of this helmet will make all the difference.

Ventilation and aerodynamics

This helmet is personal protective equipment (PPE). The protection it provides depends on its condition.
We can only accept helmets returned in new condition. If your helmet doesn’t suit you, please return it with the user guide and tags.

Return conditions (specific to PPE)

Helmets don’t last forever. For maximum safety, we recommend replacing your helmet at least every 5 to 7 years. Be sure to store your helmet in its case, in a dry, cool place away from sunlight.
Extreme temperatures will deteriorate the helmet's foam more quickly.

Always replace your helmet after a major impact, as damage you can’t see may affect its protective ability.

Helmet lifespan

Helmets

Lightweight design: weighs only 129 g (4.5 oz) in size M.

Elastic sleeves and hem at the back for a snug fit.

Back: 3 classic pockets and 1 zip pocket. 
Sides: 2 pockets for trash.

The unisex Racer 2 jersey is designed for cyclists seeking technical features and performance in warm weather (15–35°C).

Frequency

Introducing the new version of our Racer jersey. It’s even lighter and more breathable than the previous version, making it perfect for your training rides and races. 

Our starting point was clear: we wanted a dedicated performance jersey that wouldn’t compromise on either breathability or aerodynamics.
Mission accomplished with the second-generation Racer jersey!

The second version of our go-to racing jersey

This jersey is unisex. 
Its materials and pattern are designed to suit a variety of body types. 

The close-fitting cut creates a second-skin effect, while 
the lightweight elastic hem with its silicone band holds the jersey in place, no matter your hip width.

This jersey uses ultra-light materials to keep you comfortable. 
Most of it is made from Amigo fabric, which is extremely breathable and lightweight. 

The sides and arms feature mesh panels to let plenty of air through and keep you nice and cool.

Ride outdoors even in the hottest weather without feeling damp from sweat. 

The thin, breathable, anti-UV fabric on the front and back keeps you cool, comfortable, and protected from UV rays.

Every technical aspect of this jersey is designed to take you to the next level under the best conditions:
- Ventilation: mesh sides and sleeves.
- Pockets: four back pockets, including one with a zipper.
- Trash pockets: two trash pockets on the sides.
- Support: elastic at the waist and wrists for an excellent fit.- Length: shorter to stop it creasing at the front when you’re in a racing position and sagging at the back when your pockets are full.

The Pro Fit cut is designed for sport cyclists who want something close-fitting.
This aerodynamic cut creates a second-skin effect that boosts performance.
The Racer range also features sleeves that cover almost the entire biceps.
This is a unisex jersey that fits both men and women.
If you want to get this Racer jersey but prefer a slightly looser fit, we recommend buying the next size up.

Pro Fit cut

700 diameter tires, 23 to 32 mm cross-section
60 mm (2 1/3") Presta valve

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 60 mm (2 1/3") Presta valve.

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50-mm wide with an inner diameter of 584 mm (27.5 x 2.00).

Our professional advice

27.5" tires, with a cross-section from 1.90 to 2.50. 
ETRTO 47/64 – 584

Compatible with 27.5 diameter tires, with a cross-section ranging from 1.90 to 2.50 and a 48-mm Presta valve.

Check the sidewall for tire information (diameter and width).
For example, 27.5 x 2.10 means your tire is 27.5" in diameter and 2.10" wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall. For example, 50-584 means that the tire is 50-mm wide with a 584-mm inner diameter (approx. 27.5 x 2.00).

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip. A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Sun protection

Coverage

Field of vision

Polycarbonate is the material of choice for sports glasses thanks to its extreme impact resistance, offering optimal safety.
Hone your sight on speed.Discover our high-performance cycling glasses, designed to beat the clock with a style that won't go unnoticed.
Polycarbonate has a natural ability to block 100% of UV rays, effectively protecting your eyes from the sun's harmful rays.

Polycarbonate lens

Category 3 lens with a grey base colour for the most accurate colour rendering.
The mirror effect is aesthetic only. 
Category 3: Filters 88% of light (protection in sunny weather)
Not suitable for use in overcast winter conditions

Lens base: 5 
Lens thickness: 1.2 mm

UV filter in accordance with ISO 12312-1.

Lens technical specifications

Nylon frames are ideal when you’re looking for something light and strong.This high-tech material stands out for its flexibility, which makes the frames both more comfortable and more durable.They adapt perfectly to the shape of your face and withstand everyday impacts.What's more, their modern, sleek design means you can wear them for any occasion.

Nylon frames:comfortable, lightweight, and modern

Note that scratches are more clearly visible on a mirror lens. The lenses are sensitive to scratching, so we recommend storing them in their case to protect them from impacts.

To clean your glasses, we recommend the following: 

- Wash in soapy water
- Rinse
- Let dry
- Wipe any residual marks with the microfibre cloth

Never rub dry glasses with a sports jersey, as this risks scratching them.

Sportswear & Footwear/

Accessories/

Sunglasses/

Women's Sports Sunglasses/

van rysel

Cycling Sunglasses - Kware Category 3 Lenses