Conventional fastening: pump to the desired level of support. No limit.
Pair of bindings + 2 discs + 8 x 16 mm screws compatible with discs + 8 washers
For use with boards with regular inserts only (not 3D or Chanel Burton).
The Illusion 400 binding is a traditional snowboard binding to go anywhere: piste, off-piste, even snow parks. Its short yet stiff highback offers good rear support for backside tricks and ankle mobility during spins.
Turn Strap System: the strap is mounted onto a hinge, allowing it to turn inwards when you lift your foot. When putting the boot on, there is free space to insert the boot into the binding without any discomfort. This also prevents the strap and the hooks from getting crushed with the boot.
This snowboarding binding enables you to finely centre the feet on the board thanks
_ to 5 possible positions for screws on the disk,
_ the adjustment of the highback from front to back: +7 mm extra adjustment,
The aim is for the shoe to hang over the board as much at the toe as the heel.
_the length of the gas pedal, particularly for large feet,
_the length of the straps.
What is the stance on the snowboard?
The stance is the distance between the 2 bindings in cm.
It can be adapted for your body shape, but all snowboards have a recommended stance for bindings, shown by a mark between the binding inserts.
If you want to position your feet wider apart or closer together on the board, test to see if you are well-placed.
How do I change my foot positioning on the board?
For piste and off-piste boards, when bringing the feet closer together, it’s best to move the front binding back and, when moving the feet apart, it is preferable to move the rear binding back. The aim is to be a little further back to turn cleanly on the slope and float a little more on powder.
For freestyle boards (symmetrical), move the 2 bindings to remain on the centre of the board.
At what angle should I put my snowboard bindings?
For a freeride run, +18° at the front and 0° at the rear is recommended. For a versatile freestyle run, try +18° et -6°. The rear foot opening lets you change when riding switch.
For pure freestyle runs, choose completely symmetrical angles such as +15° et -15° for example.
Angle choice on bindings is a very personal thing. Don’t be afraid to check out what others are doing and try out different options. You might be pleasantly surprised!
Remember to centre your boot on your board!
The disk bindings with 4 screws generally allow for several positions.
This setting is used to centre the boot on the snowboard and prevent the foot from protruding too far. The boot must protrude from the board equally on both sides. You can also rotate the disc through 90° to put more or less stance than that provided by the inserts. In this case, the bindings cannot be centred laterally.
What’s the right size for my snowboard bindings?
M = sizes 4.5 to 7.5
L = sizes 8.5 to 13.5.
But just as you would always try on a shoe with your own foot, try on the bindings with your snowboard boots. The size of boot can vary in volume depending on the brand.