Good foot support at high speed on blue to black pistes.
A single tightening buckle: adding/removing your bindings is child's play.
Numerous adjustments: fits lots of junior snowboard boots.
EVA foam at the toes and heels.
Size XS: C11½ to 1.
Conventional fastening: pump up to the required level of support. No limit.
Pair of bindings + 2 discs + 8 x 16 mm screws compatible with discs + 8 washers
Only for use with boards with regular inserts (not 3D or Chanel Burton).
A word from the Product Manager
Kids, like their parents, want to be get their bindings on/off without help. Two-buckle fasteners take longer to handle. The single binding, with an asymmetrical strap, is more than enough, even for kids who are proficient at snowboarding with a mix of speed, carved turns and jumps.
Single-buckle opening mechanism
A single buckle firmly tightens the ankle, with an asymmetrical strap over the toes, which is needed for backside turns. It's the easiest choice for kids!
The original settings are suitable for most users. Nevertheless, you can adjust them:
- the angle of the highback (canting)
- the volume of the strap with the pre-drilled ratchets
Stance (binding spacings)
Although they can be adjusted to fit your body shape, bear in mind that all snowboards have a recommended position for the bindings (recommended stance, shown by a mark between the inserts of the bindings). Increasing the stance forces you to be positioned low on your board and gain stability. It also makes it easier to complete rotations in the air. On freestyle boards, the recommended stance is usually more important than on all-mountain boards.
How do I change my stance on the board?
For on/off-piste boards, to position your feet closer together, move only the front binding further back. To move your feet further apart, move only the rear binding further back. The aim is to be set a little further back to take the turns better on piste and to float on powder snow.
For freestyle boards (symmetrical), it is best to move the 2 bindings to remain centred on the board.
At what angle should I put my snowboard bindings?
For a freeride program, we recommend +18° at the front and 0° at the rear.
For a on/off-piste use on all types of snow, we recommend +18° and -6°. The open position of the rear foot helps you keep your shoulders in line with the board.
In pure freestyle use, don't hesitate to choose completely symmetrical angles, e.g. +15° and -15°.
The choice of binding angles is very personal; don't hesitate to try different options to find what works for you.
Don't forget to centre your boot on your snowboard!
Disc bindings with 4 screws can slide along a single axis & generally have 5 possible settings. This setting is used to centre the boot on the snowboard & prevent the foot from protruding over the edge of the board to avoid falling. Your boot must protrude by an equal amount on both sides of the board. You can also rotate the disc through 90° to increase or decrease the stance in relation to that provided by the inserts. In this case, the bindings cannot be centred laterally.