clearance

Compatibility

Replaces the brake housing on your bike. 
Compatible with all bike brands and types

Intensity

Housing has a 5 mm outer diameter.
Length: 2 m.

Technical information

Cleaning and lubricating cables on a regular basis is recommended to prolong their life. Do not clean with high pressure power washers.

Maintenance tips:

Bike Brakes

onlyonline

Compatible with all brands and kinds of bikes.

Replacement derailleur cable for your bike (mountain, road, hybrid, or city).

Condition

Length (mm)

Derailleur Position

Main Material

Length: 2.27 m (2 1/2 yd)
Diameter:  1.1 mm (1 1/5 yd)

Rockrider

For all types of V-Brake callipers, on any type of bike.

Abrasion resistance

Versatility

Easy adjustment with the adjustment spacers.

Easy assembly/dismantling

Brake Type

Weather Conditions

Braking Surface

Replaces the chain of your 3- to 8-speed bike. Compatible with 3- to 8-speed Shimano, Campagnolo and SRAM derailleurs

Number of Speeds

Number of Links

For easy assembly, adapt chain length with a chain tool available on our website (ref: 8351521)

Mounting

For easy dismanteling, use a quick link chain tool and/or a chain tool available on our website (ref: 8352339 and 8351521)

Dismantling

Number of links

Bike Chains

Designed for replacing the derailleur hosings on your bike. Compatible with all types of bikes and drive trains.

Anti-friction hose (4 mm diameter).
Length: 2 m

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Tire Assembly

Skill Level

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Pro tip

Weight:

Bike Tubes & Valves

Apply with a brush or with the chain cleaner

Ease of use

Visual efficiency

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

Volume (ml)

Application Type

Disc Brake Compatibility

Frequency

Here's our advice for the best results on your chain/drive train: Apply the degreaser with a paintbrush or your chain cleaner.
Scrub hard-to-reach spots with a brush (drive train rollers, cassettes).
Leave for a few seconds before rinsing with water until all residue and black marks disappear. Then dry the chain and drive train with a microfibre cloth or compressed air.
You can then lubricate the parts.

Advice from our team: 

If you use a brush to apply this degreaser, you'll need about 25 ml (1 oz.) of product for a good application (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml (1/3 oz.) per use (i.e. 55 uses with this 500 ml (1/2 qt.) bottle).

How much degreaser should you use?

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This plant-based degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

How to use this product: 

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Maintenance advice: 

Prevent any contact with your disc brakes or brake pads.
Protect them with a microfibre cloth.

Precautions:

500 mL (1/2 qt.) container = approx. 15 uses

User tip: 

This product has been designed, formulated, produced, and packaged in France.

Did you know?

Made in:

Capacity:

Bike Tools

Compatible with brake callipers:
Shimano: 105, Ultegra and Dura Ace
- SRAM

Easy dressing

Brake control

Replacement bolt-on brake pads for your road bike.

Brake pads must be parallel to the rim to ensure an even wear. Visit our workshops to make sure your brake pads are properly installed.

Assembly instructions

Optimal comfort with EVA Foamed + gel composition

User comfort

Length suitable for all road and gravel bike handlebars.

Developed to provide excellent grip and optimal comfort for long rides.

Bike Handles & Grips

Robustness

Adjustable

Designed for recreational and sports MTB/hybrid bikes with V-Brake calipers.

Position

For Avid / Sram calipers
Sram Force, Red, Rival eTap AXS

Braking power

Sintered with a high friction index. 2x longer lasting than organic

Replacement disc brake pads.Semi-metallic brake pads, the most versatile

Composite Material

Type of Brake Pad

This involves gradually heating up the brake pads and rotors to create an even contact surface.
Before bedding in your brakes, it’s important to do the following:
- Clean your brake rotors. If you change the pad, it’s recommended that you also change the rotors.
- Make sure you have the right equipment. Wear a helmet and fix a bike computer or bike GPS to your bike.
- Choose a safe place. Bed in your brakes on a flat, dry road with no obstacles.

Bedding in your brake pads is absolutely essential for effective breaking.

It’s important to alternate between the front and rear brakes, and to work through the following steps:
Step 1: Ride at 15 km/h and gradually brake to slow yourself to 5 km/h, 10 times in a row.
Step 2: Ride at 20 km/h and gradually brake to slow yourself to 5 km/h, 10 times in a row.
Step 3: Ride at 25 km/h and gradually brake to slow yourself to 5 km/h, 10 times in a row.
Between each step, release the brakes and ride a few dozen metres to let the rotor and caliper cool down.

The bedding-in process involves gradually braking several times in a row from increasing speeds.

- Use one brake at a time so that you don’t overheat the pads.
- Ride on a flat surface to avoid jolts.
- Don’t brake abruptly.
- Be patient. Bedding in can take up to 30 minutes.

- If you notice a rainbow mark on your rotors or if your braking isn’t very effective, this means that your brakes are “glazed”. If this happens, please visit a Decathlon workshop.

A few extra tips for bedding in your brakes:

1 pair of brake pads
1 spring
metal pin not included

Content

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

Remove the old inner tube using a tire lever.

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Our professional advice

Designed for replacing single-speed bike chains.

Long-lasting effect

Water drainage

Designed for replacing your brake pads with cantilever callipers.

27.5" tires, with a cross-section from 1.90 to 2.50. 
ETRTO 47/64 – 584

Compatible with 27.5 diameter tires, with a cross-section ranging from 1.90 to 2.50 and a 48-mm Presta valve.

Check the sidewall for tire information (diameter and width).
For example, 27.5 x 2.10 means your tire is 27.5" in diameter and 2.10" wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall. For example, 50-584 means that the tire is 50-mm wide with a 584-mm inner diameter (approx. 27.5 x 2.00).

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip. A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Suitable for 24" to 26" bikes. Not recommended for mountain and road bikes.

Universal attachment on a frame or fork equipped with inserts.

Attach the Vioo Clip visibility light at the rear using an insert.

Visibility

Non-messy

A universal mudguard for the front and back of your bike. Reduces splashes!

Weight (g)

removable

Assemble With Tools But Without Tools Provided

Assembly Type

Foldable

Attachment

Attachment Type

Width

Length (cm)

This mudguard fits the vast majority of 24" to 26" bikes. This mudguard is primarily designed for occasional recreational rides.
This isn't the best mudguard for our Rockrider bikes. Instead, we recommend buying a specific mountain bike mudguard (product ref: 8385291)

This mudguard only fits bikes with eyelets. Ask a sales assistant to be sure.

Which bikes are compatible with this mudguard?

This product has space for fitting a VIOO Clip, an LED light that can be clipped on and off anywhere in one go.
It provides red or white light in continuous or flashing mode. With VIOO CLIP lighting, you are clearly visible from up to 120 m (130 yd) away. Battery life is 9 hours in flashing mode, 4½ hours in continuous mode. Easy to recharge via a USB cable (sold with the VIOO Clip).

Set weight: 240 g (8 1/2 oz.). 
Front dimensions: 56 cm (22").
Rear dimensions: 71 cm (28").Width: 6.5 cm (2 1/2").

Weight and dimensions

- This set comes with 3 screws, 4 washers, 2 brackets, and 2 grommets. 
- You will need a 4 mm (1/10") Allen key and an 8 mm (1/3") spanner to mount this mudguard.

Assembly

Bike Fenders and Mudgards

Weight

Designed for competition and recreational MTBs and hybrid bikes.
Provide more power during climbs and acceleration.

max inclination angle (°)

Compatible with all 1- to 12-speed quick-release chain links.

Perfect for removing and reattaching quick-release links.

Designed for optimal efficiency, this quick-link chain tool allows you to remove the quick link from your bike chain in a single step. 

Length: 158 mm (6.2″)
Width: 68 mm (2.7″)
Thickness: 8.1 mm (0.3″) 
Weight: 72 g (2.5 oz)

Features

The quick link chain tool is for removing and installing the chain's quick link. The perfect way to quickly remove links when carrying out repairs. 


What is this tool for?

Positioning: 
Shift the chain onto the small chainring and the small sprocket.
Disassembly: Work on the lower section to prevent sudden lash-back. Derail the chain or use a hook to slacken it.
Caution: 
Carefully locate the quick link. Place the plier handles on either side of the quick link, without applying force anywhere else.

Re-installing:
Position the link on the bottom and check that it’s securely fastened. 

Advice from the team

Medium support, suitable for running up to 8 km/h (5 mph).

Breast support

Racer back that frees up the shoulder blades for unhindered movements.

Freedom of movement

Wicking fabric keep you cool during your runs.

Moisture management

This sports bra is the ideal accessory for medium-impact sports, e.g. working out, dancing, etc.

Maximum wash temperature of 30°C. Very delicate cycle.

Protective Shell

Adjustable Straps

Stitching Type

Bra Type

Bust Support Type

Style

Back Shape

With this medium-support sports bra, you can give your all in moderate-impact activities, such as dancing, working out, cardio training, cycling, etc. while having optimal chest protection.

What activities is the medium-support muscle back seamless bra suitable for?

When playing, it’s essential you feel comfortable when moving. This means that you should choose clothing that makes it easier to move and take up postures. 
This sports bra has been designed with this in mind. We design a muscle back that will free up your shoulder blades so you have move freedom of movement for your arms.

How does the medium-support muscle back seamless bra provide freedom of movement?

You go all out, to the point where you are often fully covered in sweat at the end of a session. This isn’t always a very pleasant feeling, right? Well, thanks to this sports bra, you can say goodbye to moisture caused by sweat. The technical fabric can wick away sweat. It also dries faster to keep you dry. 
For greater efficiency, we also added a ventilated area between the breasts.

Stay dry, even when you are pushing yourself to the limit! How is this possible with the seamless, muscle-back, medium-support bra?

The running bra has two flexible single-thickness cups (no shell).

What type of cups does this medium-support muscle back seamless bra have?

Did you know that your breasts are supported almost exclusively by your skin? This makes them vulnerable and, during physical activies, the forces exerted on them are even higher than usual. The movements and bouncing they experience can make them up to five times heavier depending on the intensity of the sport. Wearing a sports bra will give you all the support, comfort, and protection you need. You are also protecting them from impacts, pain and premature sagging.

Why must your chest be supported during sport?

During sports, breasts experience forces that stretch the skin and ligaments of the chest. Lack of proper support can cause pain and premature sagging. However, too much support can also have negative consequences. The level of support your bra provides must be tailored to your bust size and the intensity of the impacts. 
The objective:To protect your chest while preserving the natural movement of the breasts.

What are the advantages of choosing between high, medium or low support?

Our labs test the models using a bust support test that measures the reduction in breast movement acceleration during sports activities. They are evaluated and then sorted into the following three levels: 1 for low support, 3 for medium support and 5 for high support.

How are the support levels of the Decathlon sports bras tested?

Depending on the type of sport you do, the support level of your bra will vary. We offer the following three options:
- Level 1: low support for activities that require slight chest movements (pilates, stretching, muscle strengthening, etc.); 
- Level 3: medium support for activities that cause moderate bouncing (dance, fitness, cardio-training, etc.); 
- Level 5: high support for activities that involve intense movements (step, treadmill, trampoline, etc.).

Sports/

Cycling/

Bike Tools and Components/

Bike Parts & Components/

Bike Brakes/

decathlon

Universal Road Brake Cable - Stainless Steel