Name: Kids’ Waterproof Sailing Jacket – 100
Brand: TRIBORD
SKU: 2967779
Price: 35 CAD
Availability: InStock
Rating: 4.8 (656 reviews)

Waterproof

Windproof

Pockets

Breathability

Water repellent

Resistance to salt water

Compact design

Do not dry clean.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Do not iron.

Maximum washing temperature 30°C. Normal cycle.

Bleaching excluded.

We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to water pressure of 5,000 mm before and after ageing (5 washes). This equates to 5,000 Schmerber - average pressure exerted by the water during rain.
The jacket's waterproofing has been tested in a rain shower with 60 litres of water/m²/hour.

Waterproofing 1/2

- High collar
- Injection-moulded plastic to avoid salt oxidation
- Water-repellent components (water runs off the fabric)
- 100% taped seams
- Central opening features a flap with a drainage channel for optimal waterproofing

Waterproofing 2/2

The hood is attached and doesn’t stow into the collar.
Its depth is adjustable. Regulations prevent the addition of a drawstring on the collar.
The hood visor and headband provide good coverage and a better hold.
The high collar protects your neck.

Hood

2 zip pockets on the front of the jacket for your hands or a few items.
NOTE: Pockets are not waterproof.

The full-length zipper includes an inner flap that protects you from wind and water,
and the collar has a soft flap to shield your chin.

Front zipper

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the RET, the easier it is for water vapour generated during physical exertion to pass through the fabric.
For example:
RET < 9 = very breathable;
RET 9–12 = breathable.
This jacket has two components with the following RET values:
> more resistant fabric: RET < 12 (or 3621 g/m²/24 h, JIS1099A standard)
Lighter fabric: RET < 8 (or 2972 g/m² /2

This jacket stays lightweight and breathable in wet conditions because water
slides off the treated fabric instead of seeping in. The water-repellent coating applied to the jacket’s exterior may change over time.
To restore it, place the jacket in the dryer for 10 minutes at the lowest temperature.

Water repellency

To maintain the water-repellent properties, infrequent washing is recommended.
Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Wash it on the synthetics cycle (30°C–40°C) with regular detergent. Don’t use fabric conditioner or bleach, as these could damage the material’s water-repellent coating. Very important: Run a full rinse cycle or extra rinse.

How to wash your jacket

Drying is a crucial phase in restoring the water-repellent treatment.
We recommend that you lay your garment flat on a clothes rack to dry. Caution: Never dry your jacket directly on a radiator.
Then place it in the tumble dryer on a short synthetics cycle, i.e. 10 to 15 minutes, before turning it back the right way round. Caution: Do not over-dry the garment.

How to restore your garment’s water repellency


Great jacket

As practical as it is pretty

A reliable and affordable option for young sailors

Great rain jacket

Nice Jacket

imperméable

veste imperméable tribord

super, mais mieux avant.

Couleur salissante

très jolie coupe vent

Parka

Veste impermeable

Coupe vent de très bonne qualité!

imperméable enfant

Très bien

Veste imperméable

Excellent

Coupe vent très pratique et confortable

Acheter Pour les vacances,…

pratique

Prêt pour le vent et la pluie

Jolie veste imperméable. Merci…

parfait

tres bien et a…

Le coupe vent parfait !

Très bon produit, acheté…

pour les pluies modérées

Ce coup vent est…

Rain jacket

Amazing jacket

Parfait

Très beau

Kids’ Waterproof Sailing Jacket – 100

Sports/

Water Sports/

Sailing/

Clothing/

tribord

Kids’ Waterproof Sailing Jacket – 100