clearance

Apply with a brush or with the chain cleaner

Ease of use

Visual efficiency

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

Volume (ml)

Application Type

Condition

Intensity

Disc Brake Compatibility

Frequency

Here's our advice for the best results on your chain/drive train: Apply the degreaser with a paintbrush or your chain cleaner.
Scrub hard-to-reach spots with a brush (drive train rollers, cassettes).
Leave for a few seconds before rinsing with water until all residue and black marks disappear. Then dry the chain and drive train with a microfibre cloth or compressed air.
You can then lubricate the parts.

Advice from our team: 

If you use a brush to apply this degreaser, you'll need about 25 ml (1 oz.) of product for a good application (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml (1/3 oz.) per use (i.e. 55 uses with this 500 ml (1/2 qt.) bottle).

How much degreaser should you use?

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This plant-based degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

How to use this product: 

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Maintenance advice: 

Prevent any contact with your disc brakes or brake pads.
Protect them with a microfibre cloth.

Precautions:

500 mL (1/2 qt.) container = approx. 15 uses

User tip: 

This product has been designed, formulated, produced, and packaged in France.

Did you know?

Made in:

Capacity:

Bike Tools

onlyonline

Robustness

We designed these 2 brushes for deep cleaning your bike.

Use the large brush in the most difficult-to-reach areas of your frame to avoid scratching, especially if you have a matte paint finish.
We recommend testing the large brush on a small area before using it on the rest of the frame.

Advice from our team

Quickly and easily clean any type of chain with a single cleaner!

Compatibility

Using the chain cleaner is quick and easy, and becomes a real pleasure.

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

Features: 

Weight:

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.


Parts: 

Long-lasting rust protection in all weather conditions.

Corrosion resistance

Smooth pedalling

Lubricating the chain reduces disturbing noises.

Noise level

This lubricant is designed for lubricating your drive train during rides in all weather conditions.

Weather Conditions

Shake the bottle before use.
Only apply to the inside of the chain, i.e. the part in direct contact with the chainring teeth and the derailleur jockey wheels. 
Wipe off any excess with a microfibre cloth.

This all-weather chain lube is designed for doing step 3. Once you've applied the degreaser (step 1), spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

100 mL (3 1/2 oz.) bottle = approx. 40 uses

This degreasing brush allows for an efficient application of your degreaser.

This brush is ideal for applying your plant-based degreaser to your bike's drive train (chain, derailleurs, cassette, etc.). 

Type of Brush

To ensure optimal maintenance, we recommend that you follow these three steps: 
1) Degrease your drive train
2) Clean your bike
3) Lubricate your chain

With this bike degreasing brush, you can apply your plant-based degreaser to your drive train and complete Step 1.

How to maintain your bike

This brush comes with a protective cap, allowing you to place it easily on a workbench or shelf, protect the bristles from being crushed, and keep your toolbox clean.
Do not pour degreaser directly into the brush, as it may overflow when inserting the brush, leading to unnecessary waste.

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Compact design

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

Stability

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

Main Material

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

Designed for lubricating your drive train on dry weather bike rides.

Shake before use.
Apply on the inside of the chain, the part in direct contact with the chainring teeth, cassette, and derailleur pulleys. 
Remove the excess with a microfibre cloth.

There are 3 steps to follow with this dry weather bike chain lubricant.
Once you've applied the degreaser (step 1), don't forget to spray the bike cleaner, rinse, and dry it (step 2) before applying the bike chain lubricant (step 3) to make your bike work like new.

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

A 100 mL (3 1/2 oz.) bottle, for around 40 applications.

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Skill Level

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Insert directly between the chain's links.

Quickly and easily read the degree of wear on your bike's chain.

Precision

Designed for easily and quickly measuring the degree of wear on your bike chain.

Place your bike on your workshop stand (for greater comfort) or against a wall.
Insert the left-hand side of the tool into a link on your chain (make sure the small hook is well inserted into the link), then lower the right-hand side onto the chain to read the result.
Once it has been properly installed on your chain, the chain wear indicator should lie as flat as possible.

How to use this tool

If the tip of the tool (the right-hand part) does not go beyond the line above the "OK" sign, then your chain and cassette are in perfect running order.
If you press the right-hand tip of the tool in between the 2 lines of the "1", then you need to change your chain.
If you press the right-hand point of the tool beyond the line at the start of part "2", then you need to change your chain and cassette or freewheel.

How to read your result

It all depends on how often you ride.
We recommend that you check the condition of your chain once a month to ensure that your gears shift smoothly and that you don't wear out your cassette or freewheel prematurely. That way, you don't have to change them more quickly than necessary.

How often should you use the tool?

Maintaining your drive train ensures that your gears shift smoothly, extends the life of your components, and eliminates unwanted noise. We advise you to follow the 3 recommended steps:
01) Degrease your drive train;
02) Clean your bike;
03) Lubricate your chain. 
You can find all our maintenance products on our website or in our stores.
Testing your chain wear regularly will prevent premature wear of your drive train.

This chain wear indicator is a precision tool. If the tool is dropped, this could affect its precision and the result obtained. 
Be careful when handling the tool and protect it from being dropped.

Length: 12.27 cm (5")
Height: 2.65 cm (1")
Thickness: 2 mm (7/100")
Weight: 29 g (1 oz.)

Product characteristics: 

Made in: 

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Height (cm)

Volume (L)

Weight (g)

reflective

Waterproof

Position

Attachment Type

Style

This bag can typically hold:
- One 700 x 35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700 x 25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5" x 1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29" x 1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.This compact and light 6-in-1 multitool 100 won't slow you down while riding.4 Allen keys (3 / 4 / 5 / 6 mm [0.1, 0.15, 0.2, 0.25"]), 1 Phillips & 1 flat screwdriver

Includes 6-functions multitool

Pack of three yellow, simple, sturdy, light, and practical tire levers. Suitable for all types of tires.
Designed for removing all types of bike tires. The tip allows you to deflate the tire and its edges attach to the spokes for greater ease.PA66 polyamide material avoids breakage when bent.Tire lever that clips together for easy storage.

Includes 3 tire levers

Bike Bags & Backpacks

Anatomical chamois pad with high-density foam perfectly moulds to your body.

Sitting comfort

Wide elastic and silicone strips at the thighs.

Quick drying thanks to active sweat-wicking fabric.

Moisture management

Super handy pocket on the outside of the thigh for easy access while riding.

Pockets

The Endurance bib shorts were designed for optimal comfort and support when riding up to 3 hours at a moderate pace.

Maximum washing temperature 30°C. Normal cycle.

Season

reinforced area

Number of Pockets

retaining strip

belt height

Reversible

Stitching Type

Pocket

Type of Length

Zipper Type

With Straps

The Endurance collection is for all cyclists looking for comfort, no matter the distance. 

Our designers and engineers pay particular attention to your comfort on the bike at every step of the design process. 
Our aim: make you (almost) forget what you’re wearing and simply enjoy the pleasures of road cycling.

The Van Rysel Endurance range

The Endurance collection comprises three signatures:

• Discover: simple, effective products, suitable for beginner cyclists

• Endurance: main collection for experienced cyclists looking for comfort for their cycle outings.

• Endurance Ultra outfits specially designed for long-distance and touring cyclists.

Signatures in the Endurance range

We’ve reworked these shorts to bring you a high-quality product with a focus on comfort for cycle outings of 3 to 5 hours. These shorts have the following features:
- silicone elastics around the thighs for excellent hold when pedalling
- a fit that is close without compression, so you can forget you're wearing it
- two easily accessible side pockets

How our Endurance cycling shorts were designed

The Endurance bib shorts come with a new anatomical chamois pad. 
The central seam lets the pad fold. This construction technology ensures a perfect fit and stability in the saddle.

Developed for men’s bodies, it is made of stretch layers that follow your body’s movement when pedalling.

Anatomic Endurance pad

This chamois pad is made from a unique combination of materials that offer the protection you need on your long rides. Both in the ischial and perineal areas. It has a protective, high-density, 120 kg/m³ foam insert. The top layer of fabric, which is in direct contact with the skin, is made from spandex and brushed polyester threads to prevent rubbing and irritation. 
All layers are extremely breathable.

Breathable, high-density foam

Men's Sports Shorts

100 mm diameter pressure gauge accurate to 1 PSI.

Power

The 260 mm metallic base provides excellent stability

Repair

We developed the 900 pump so you can easily pump your bike tires up to 10 bar or 145 PSI.

Valve Type

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

The 900 bike foot pump will be your go-to for inflating your bike tires as easily as possible. Its oversized pressure gauge (100 mm) and accuracy of 2 PSI (or 0.2 bar) mean you’ll always have the optimal pressure in your tires to maximize performance, grip, and comfort, no matter the terrain!
There’s also a visual marker to make it even easier to read when visibility is poor.

Inflation precision

The 900 foot pump has a 32 mm diameter cylinder, making it a breeze to build up pressure in your tires.

Sports/

Cycling/

Bike Tools and Components/

Bike Tools/

decathlon

Bike Cleaner 1 L (1 qt)