clearance

Apply with a brush or with the chain cleaner

Ease of use

Visual efficiency

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

Volume (ml)

Application Type

Condition

Intensity

Disc Brake Compatibility

Frequency

Here's our advice for the best results on your chain/drive train: Apply the degreaser with a paintbrush or your chain cleaner.
Scrub hard-to-reach spots with a brush (drive train rollers, cassettes).
Leave for a few seconds before rinsing with water until all residue and black marks disappear. Then dry the chain and drive train with a microfibre cloth or compressed air.
You can then lubricate the parts.

Advice from our team: 

If you use a brush to apply this degreaser, you'll need about 25 ml (1 oz.) of product for a good application (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml (1/3 oz.) per use (i.e. 55 uses with this 500 ml (1/2 qt.) bottle).

How much degreaser should you use?

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This plant-based degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

How to use this product: 

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Maintenance advice: 

Prevent any contact with your disc brakes or brake pads.
Protect them with a microfibre cloth.

Precautions:

500 mL (1/2 qt.) container = approx. 15 uses

User tip: 

This product has been designed, formulated, produced, and packaged in France.

Did you know?

Made in:

Capacity:

Bike Tools

Quickly and easily clean any type of chain with a single cleaner!

Compatibility

Using the chain cleaner is quick and easy, and becomes a real pleasure.

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

Features: 

Weight:

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.


Parts: 

The 3 products are suitable for every kind of bike, mechanical, or electric.

Get your drive train and your bike in perfect shape.

With its compact size, you can take the kit everywhere with you.

Compact design

This bike cleaning kit follows just 3 steps: degrease, clean and lubricate. Care for your electric, road, city, mountain, hybrid bike and more.

Maintaining your bike will let you:
- Extend the life of the various components 
- Ensure that it works properly
- Reduce unwanted noise
- Prevent breakages
- Enjoy the pleasure of riding a clean bike

Why should you maintain your bike?

To ensure full maintenance, we recommend that you follow these 3 steps: 
01. degrease your drive train
02. clean your bike
03. lubricate your chain

How to look after your bike

This kit contains the 3 products needed to carry out the 3 steps required to properly maintain your bike. You will be able to carry out at least 3 full services on your bike.
Products included in the kit: 
01. Plant-based degreaser (100 ml)
02. Concentrated bike cleaner (100 ml)
03. All-weather chain lubricant (50 ml)

Kit contents

This degreaser lets you effectively degrease your drive train. You can apply it using a brush or our chain cleaner. 
Application with a brush: pour about 25 ml into a pot and apply generously to your chain, cassette, derailleurs and derailleur pulleys. Leave for a few moments then move on to step 2.
Application with the chain cleaner: pour on about 9 ml, turn the pedals a few times before moving on to step 2.

How to use the drive train degreaser

Pour about 30 ml of concentrate into a bucket of water then apply generously with a sponge to the whole bike. 
The product will not damage the paint or any other components of the bike.
Rinse with clean water then dry your bike. Pay particular attention to drying, especially your drive train, to ensure total efficiency later on. Now you can move on to step 3.

How to use the concentrated bike cleaner

Remove the cap, position the applicator on the lower part of the chain (inner side) and make a full turn (in the opposite direction to pedalling). 
To make sure you don’t apply too much, use your quick-release as a guide.  
Remove the excess lubricant with a cloth placed under the chain, then do 2 or 3 complete turns of the pedal (in the opposite direction).
The lubricant will protect your chain in all riding conditions.

How to use your chain lubricant

01. degrease your drive train if you’re applying the product with a brush, be careful not to project the dirt towards you.
02. concentrated bike cleaner: in winter, use warm water to make this step easier and use cold water in the summer.
03. chain lubricant: apply on the inside of the chain, position the applicator on the lower part of the chain.

Good to know

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

Maintenance advice

Made in

List of ingredients:
Mix of saturated and unsaturated fatty acid methyl ester PEG-30 glyceryl cocoate 
Each ingredient is given with its INCI name (International Nomenclature of Cosmetic Ingredients)

Drive train degreaser composition

Concentrated cleaner composition

Synthetic oil with additives and anti-wear properties, corrosion protection and wash resistance.

Chain lubricant composition

onlyonline

A precise, durable, reusable spray nozzle

Use the cleaning spray on all of your bike's parts.

Versatility

This bike cleaning spray is designed for cleaning your bike without harming the paint or any parts.

This bike cleaner is designed for doing step 2. 
Remember to degrease your drive train before spraying the cleaner onto your bike (step 1). Next, spray on the cleaner, rinse it off and dry your bike (step 2) before applying your chain lube (step 3). Your bike will then be as good as new.

The spray nozzle used for this product is very precise, specifically designed to be used with bikes, and extremely durable. In fact, it can be used to spray on more than 50 L (44 qt.) of bike cleaner. Because of this, we've created a 1 L (1 qt.) refill that avoids you having to throw away the spray nozzle.

Danger! Cause skin irritation. Causes severe eye irritation. Keep out of reach of children.Wear protective gloves and eye / face protection. 
In case of contact with eyes: Rinse cautiously with water 
for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Warnings:

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

Stability

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

Main Material

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

Long-lasting rust protection in all weather conditions.

Corrosion resistance

Smooth pedalling

Lubricating the chain reduces disturbing noises.

Noise level

This lubricant is designed for lubricating your drive train during rides in all weather conditions.

Weather Conditions

Shake the bottle before use.
Only apply to the inside of the chain, i.e. the part in direct contact with the chainring teeth and the derailleur jockey wheels. 
Wipe off any excess with a microfibre cloth.

This all-weather chain lube is designed for doing step 3. Once you've applied the degreaser (step 1), spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

100 mL (3 1/2 oz.) bottle = approx. 40 uses

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Skill Level

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

How to choose your inner tube

Remove the old inner tube using a tire lever.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Bike Tubes & Valves

Insert directly between the chain's links.

Quickly and easily read the degree of wear on your bike's chain.

Precision

Designed for easily and quickly measuring the degree of wear on your bike chain.

Place your bike on your workshop stand (for greater comfort) or against a wall.
Insert the left-hand side of the tool into a link on your chain (make sure the small hook is well inserted into the link), then lower the right-hand side onto the chain to read the result.
Once it has been properly installed on your chain, the chain wear indicator should lie as flat as possible.

How to use this tool

If the tip of the tool (the right-hand part) does not go beyond the line above the "OK" sign, then your chain and cassette are in perfect running order.
If you press the right-hand tip of the tool in between the 2 lines of the "1", then you need to change your chain.
If you press the right-hand point of the tool beyond the line at the start of part "2", then you need to change your chain and cassette or freewheel.

How to read your result

It all depends on how often you ride.
We recommend that you check the condition of your chain once a month to ensure that your gears shift smoothly and that you don't wear out your cassette or freewheel prematurely. That way, you don't have to change them more quickly than necessary.

How often should you use the tool?

Maintaining your drive train ensures that your gears shift smoothly, extends the life of your components, and eliminates unwanted noise. We advise you to follow the 3 recommended steps:
01) Degrease your drive train;
02) Clean your bike;
03) Lubricate your chain. 
You can find all our maintenance products on our website or in our stores.
Testing your chain wear regularly will prevent premature wear of your drive train.

This chain wear indicator is a precision tool. If the tool is dropped, this could affect its precision and the result obtained. 
Be careful when handling the tool and protect it from being dropped.

Length: 12.27 cm (5")
Height: 2.65 cm (1")
Thickness: 2 mm (7/100")
Weight: 29 g (1 oz.)

Product characteristics: 

Made in: 

Designed for lubricating your drive train on dry weather bike rides.

Shake before use.
Apply on the inside of the chain, the part in direct contact with the chainring teeth, cassette, and derailleur pulleys. 
Remove the excess with a microfibre cloth.

There are 3 steps to follow with this dry weather bike chain lubricant.
Once you've applied the degreaser (step 1), don't forget to spray the bike cleaner, rinse, and dry it (step 2) before applying the bike chain lubricant (step 3) to make your bike work like new.

A 100 mL (3 1/2 oz.) bottle, for around 40 applications.

Use the cap to measure out the exact dose.

The concentrated cleaner will help you eliminate tough dirt.

Use this concentrate to clean all of your bike's parts.

We've developed this concentrated cleaner for degreasing and cleaning all of your bike's parts.

Dilute 1 cap of concentrate in 5 L (4 1/2 qt.) of water.

This concentrated bike cleaner is designed for doing step 2. 
Remember to degrease your drive train before using the concentrated cleaner (step 1). Next, spray on the cleaner, rinse it off and dry your bike (step 2) before applying your chain lube (step 3). Your bike will then be as good as new.

500 mL (1/2 qt.) bottle = approx. 12 uses

You can use the cap to measure out the correct amount of product. If your bike is particularly dirty, you may need to use slightly more product.

Volume: 

Compatible with bikes equipped with bottle cage screws.

Designed for carrying a water bottle on your bike.

Position

Bike Hydration

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Robustness

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Sports/

Cycling/

Bike Tools and Components/

Bike Tools/

decathlon

2 Bike Cleaning Brushes