Breathable polyester fabric that wicks away perspiration.

Breathability

Durable shirt designed for all nature activities, hunting, fishing, animal watching, and bushcraft.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Maximum washing temperature 30°C. Normal cycle.

Frequency

Collar Type

Weather Conditions

sleeve length

Waterproof

anti-uv

Pocket

Customization

Style

Main Material

Men's riding gear

Main fabric (6% elastane) offering greater freedom of movement.

Freedom of movement

Lightweight pants (435 g in size L) with a density of 157 g/m².

Lightweight

Durable fabric tested at 60,000 rubs (100,000 for reinforcement), no tearing.

Abrasion resistance

Main fabric (94% polyamide) that wicks away perspiration.

Moisture management

Aeration vents at the back of the knees to provide greater ventilation.

Ventilation

Two hand-warmer pockets, a back pocket, and a zipped side pocket.

Pockets

Our designers developed these breathable, lightweight and durable trousers for greater comfort during your outdoor, hunting and fishing outings.

Maximum wash temperature of 40°C. Normal cycle.

reinforced area

Number of Pockets

belt height

Silent

Place of Practice

modular

Windproof

Type of Length

Type of Bell

Camouflage

The pants have polyester reinforcements at the knees, lower legs and on the seat. Double stitching (assembly seams) and bar tacks at all the high-stress areas (pocket openings, loops and base of fly zip). Finally, the 4-point per centimetre sewing thread solidifies the overall assembly.

Durability

Semi-elasticated waist for optimal morphological adaptability, and pants made of 6% elastane for better freedom of movement (the fabric hugs your figure) and reinforcements with 2% elastane.
Pants with a tight-fit cut.

Comfort

1 horizontal zipped pocket made of water-repellent fabric on the right leg to protect your documents or accessories from humidity (morning dew).
1 pocket with snap closure on the right buttock made of water-repellent fabric as well. 
2 hand-warmer pockets.

Main fabric (94% polyamide and 6% elastane) = 157 g/m²
Yoke (61% polyester, 37% polyamide and 2% elastane) = 240 g/m².

Components

Hiking Pants

UPF 50+
Sun protection even when wet
Blocks min. 95% of UV rays

Sun protection

Quick drying

Coverage

This hooded T-shirt is designed for fishing in windy or rainy conditions.

Condition

Skill Level

Season

UV Protection Factor

Hood

Comfortable design made with UPF 50+ polyester.

Composition

Hood offers added protection from the elements. Long, retractable sleeves. Extended sleeve hem protects wrists from wind and rain.

Features

Loose and comfortable fit for freedom of movement

UPF is a sun protection factor (Ultraviolet Protection Factor) and is standardized worldwide. How much UV light a fabric lets through to your skin. In order to meet the standards (EN 131758-1), the UPF 50+ component has to block at least 95 % of UVB rays and 98% of UVA rays.
Our anti-UV t-shirt 500 with hood is UPF 50+ certified, guaranteeing effective protection from the sun. It can be worn in or out of the water. 


Anti-UV
UPF 50+

Our fishing clothes are created by our teams of engineers and designers in Cestas, France.
In Gironde, close to a number of fishing spots (big lakes in the south west, the rivers in the Pyrenees, and even the Atlantic Ocean).
Our clothes are also tested and approved by lots of fishermen: team members, customers, and even fishing guides.

Design

Men's T-Shirts & Tank Tops

Non-slip rubber outsole with 4-mm (0.15”) gripping treads.

Traction

Durable rubber stone guard at the front protects your toes.

Robustness

Waterproof, breathable membrane: your feet stay dry for 3 hours in any weather.

Full-length cushioning with the EVA midsole.

Cushioning

These waterproof shoes are designed for occasional hiking. They’re essential for enjoying the mountains.

leather origin

Removable Sole

Shoe Height

Outsole Technology

Foot Width

Tightening Type

Our products are classified based on performance and features for 3 mountain hiking levels:
- Occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10 km (6 miles), and less than 700 m (2,296 ft.) in elevation gain.
- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km (6 to 12 miles), and 700 to 1,200 m (2,296 to 3,937 ft.) of elevation gain per outing.
- Intensive: more than 20 times a year, more than 6 hours, more than 20 km (12 miles), and 1,200 to 2,000 m (3,937 to 6,562 ft.) of elevation gain per outing.

How often do you hike and at what intensity?

Certified sole grip. To be certified, the shoes must pass lab tests to assess their grip rate on different surfaces (smooth, rough, dry, wet). To validate these tests, we have a panel of representative testers evaluate the quality of our soles out in the mountains across 500 km (310 miles).

Grippy sole

In a lab, the boot is immersed in water to mid height while on a mechanical arm that simulates walking. We use this test to determine how long and how far the boot can go and stay dry. The results are validated in the field and in the rain to ensure consistency.

Waterproofing test

To keep feet dry, use a waterproof gaiter or mini-gaiter to protect the top of your boots and keep water, pebbles, and sand out.

Re-waterproof boots twice a year (search for “waterproofing” on our Decathlon website) to help restore original water-repellent qualities and prevent stains on the outside.

Making waterproofing last longer

The most important thing is to try on several sizes and styles to find the one most suited to you. 
You can choose one size up from your usual size so your toes won’t bump the toe box when going downhill, as long as you still have the proper support to prevent friction.
Tip: keep your toenails short and, before a long descent, check that your laces are tight enough to keep your foot from sliding forward in the shoe.

What size should I choose?

Certain Decathlon stores have a test trail.

1. Try on both shoes, standing up, wearing your hiking socks.
2. Tighten the laces, making sure they’re evenly tightened.
3. Check two points:
- your heel doesn’t lift up before the shoe when walking uphill.
- your foot doesn’t slide and your toes don’t touch the front when going downhill.
4. Try on several sizes and models.

Break them in gradually to adapt them to your feet.

Buying tips/how to try on hiking boots

Waterproof shoes are less breathable than non-waterproof shoes. Socks like the MH 500 Hiking Socks have a medium-length upper to away perspiration and reduce friction.

Which socks?

The original insole in your shoes is designed to fit most feet. Changing the insole may provide:
1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 
2. More comfort: the insoles can also provide warmth and/or cushioning.
3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.

Optimize your shoes: replace your insoles!

- Leave to air dry.
- Remove dry mud with a stiff brush. 
- Clean marks using a brush and some warm water.
- Leave to dry.
- Spray with a re-waterproofing product to restore the upper’s water resistance.

How to care for your shoes

Men's Hiking Shoes

Windproof fabric with brushed inner for protection down to -10°C.

Warmth

Water-repellent component. 
Waterproof inserts on buttocks and lower legs.

Water repellent

Stretch fabric, preformed knees, and semi-elastic waistband.

Stretch

Equipped with a gaiter and a fastening hook to keep snow out.

Limits snow entering

These warm, water-repellent, and ventilated trousers are perfect for your winter hikes. Guaranteed protection in any type of snow.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Ventilation Zippers

Type of Brushing Boots

RECCO system

With Straps

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

What is water repellency and how can you maintain it?

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: the knit component is designed to trap air, which acts as a natural insulator, keeping the body warm. Animal fur and feathers work on exactly the same principle. 

How can I be sure that these pants are warm enough for winter hiking?

Thermal comfort is a balance between warmth and breathability. If moisture accumulates, you will feel the cold when you’re less active. We designed these pants specifically for occasional, intense physical activities by adding a ventilation system in a micro-perforated fabric with side zippers at the thighs. A good balance between heat and ventilation for optimal thermal comfort.

Good ventilation for optimal thermal comfort

The slim fit and stretchy fabric provide essential freedom of movement. The zipped pockets keep personal items secure (tissues, lip balm, keys, etc.).

Comfortable, practical winter hiking pants

In winter, it is important to protect yourself from moisture (snow, rain) and wind, because they can significantly cool the body. The windproof and water-repellent outer fabric was designed to handle all conditions. Waterproof panels at the seat and lower legs.
Gaiters with fastening hooks for the laces keep snow out.

How do these pants protect from outdoor conditions?

These pants are part of the perfect outfit for hiking off the beaten path: the SH 500 outfit. With the SH 520 Pants, SH 500 Fleece, SH 520 Boots, and SH 500 Snowshoes, you can enjoy winter hiking in any conditions. Travel light with the right gear.

The perfect outfit for hiking in cold weather

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

Durability tests are conducted on selected components: resistance to rubbing and abrasion, and colourfastness. All these tests were conducted on the pant material.

Will your pants withstand regular use long-term?

1 large zipped chest pocket to secure documents or money.

Lightweight and comfortable, it's ideal for hiking, city outings, and travelling.

Maximum wash temperature of 30°C. Very delicate cycle.

moisture management

The shirt was designed using a technique called warp and weft. Unlike knit T-shirts, “warp and weft” fabric doesn’t stick to the skin. Selecting this shirt means you are getting more breathability than with another T-shirt.

Why a shirt rather than a T-shirt?

We designed it with a fit that is neither too loose nor too tight: a perfect, stylish cut that can be worn on any occasion.

How does this shirt fit?

clearance

Pre-shaped medium density foam pad.
Thickness: 13 mm
Density: 100 kg/m3

Sitting comfort

Stretchy fabric ensures shorts stay in place at the waist and thighs.

Fully co-designed cycling shorts. Special attention was paid to the waistband and hems: an excellent fit without excessive pressure!

Length

retaining strip

Stitching Type

Zipper Type

To ensure greater comfort in the saddle, we created this medium density chamois pad.
The fabric is soft and breathable. The padded zone is soft, with a density of 100 kg/m3 and a thickness of 13 mm. Perforated fabric actively wicks away perspiration. The pad keeps you comfortable on rides of up to 2 hours.

Our new medium density pad

The shape of the padded zones was defined by tests on a sheet of pressure, designed from a dummy moulding and approved after various trials and usage tests. These tests, conducted on real cyclists, involved measuring the pressure points on the saddle. The padded zone covers contact points where pressure is greater. There is a dart at the front for a better fit.

Shape

The ischium bone and the perineum are covered and protected. The reinforced area between the legs is relatively narrow to prevent irritation from rubbing while pedalling. Channels have been embossed into the reinforcements to provide greater flexibility.

Reinforced areas

Machine wash at 30°C. Wash on a synthetics cycle. Turn the garment inside out. Do not add fabric softener. Hang to dry in a warm, well-ventilated area. Do not tumble dry. Do not dry clean. Do not add bleach. Do not place on a heater to dry.

Care instructions

Based at the Btwin Village in Lille, our product design team constantly works to make cycling more comfortable for our users.
We strive to create products that meet our users’ specific cycling needs and eliminate unnecessary features.We then test our products in the field, as we are convinced that subjecting them to real-world conditions, like the ones you experience on your bike, is the only way to continuously improve our products.

Product tests

Men's Leggings

Fabric wicks away perspiration for quick drying.

4 back pockets (including 1 zipped) and 2 side pockets.

We designed this jersey to support you as you start cycling in hot weather, on rides of up to 2 hours or 50km.Cut:Regular fit.

Intensity

Machine wash at 30°C. Synthetics cycle. Turn the garment inside out. Do not add fabric softener. Hang dry in a warm, ventilated area. Do not tumble dry.Do not dry clean. Do not bleach. Do not place on a heater to dry.

"Regular" cut suitable for all body types

The component reduces body odour. Laboratory test ISO 17299-3.

Odour control

The acrylic thread in the fabric speeds up the drying time.

The blend of merino wool and synthetics makes the T-shirt more durable.

Wool is breathable and can be worn in summer and winter.

Softness

The T-shirt weighs 148 g (5.2 oz) in size L. 155 g/m² fabric.

Weight

A merino wool T-shirt for complete peace of mind on your multi-week treks around the world.

Duration

Wool is the best material for trekkers on the move. This material’s inherent properties reduce sweat odours. So you can take fewer clothes in your backpack!

Why choose wool?

Hiking T-Shirts & Sweaters

Work your lower body in a variety of ways with over 15 exercises.

Versatility

Scan the QR code on the product for exclusive training sessions.

Connectivity

Lightweight and compact, you can take it anywhere, from home to the gym.

Compact design

You can do over 15 exercises with this high resistance band for a toned, sculpted body. Mix things up, challenge yourself, and admire your progress. 

Resistive Force

Body Area

Packaging

Strength training, rehabilitation, Pilates - a resistance band allows you to tackle any number of challenges! Its progressive resistance replaces dumbbells and weights. A good way to preserve your joints from heavy loads while still sculpting your body. The fabric provides a safe, comfortable grip every time you work out.

What can you do with a resistance band?

From tricep extensions to kick-backs and lunges, this resistance band helps you sculpt your lower body. Whether a beginner or an advanced athlete, it adapts to all levels. Need some inspiration? Scan the QR code to access free training sessions. Get ready to redefine your fitness routine!

What can you work with this resistance band?

For warm-ups or more gentle exercises, we also have lighter levels of resistance. You can find the following resistance levels in stores or online: 
- light resistance (ref 8920486)
- medium resistance (ref 8920489)

Need other resistance levels?

Weight: 91 g (3.2 oz)
Length: 20.5 cm (8.1”)
Width: 4.5 cm (1.8”)
Height: 3 cm (1.2”)

What are the dimensions of this band?

The printed numbers allow you to adapt the resistance level of your resistance band. The secret? The closer you get to the centre, the greater the tension. No more need to collect bands - this versatile tool adapts to your progress and allows you to explore a multitude of exercises.

What do the numbers on the band mean?

Endurance champion: this fitness band tackled the challenge of 100,000 stretches to 100%! You can count on it for 4 workouts per week for at least 4 years. Dive into the most daring exercises without fear, it'll keep up without flinching.

Is this band durable?

You shower off after each workout, and your band deserves to freshen up as well. Remove any dust and sweat with a damp cloth, then let it air dry. And there it is, fresh and ready for a new workout.

solognac

Overshirt - 100 Brown