clearance

Apply with a brush or with the chain cleaner

Ease of use

Visual efficiency

Natural

This 100% plant-based degreaser is designed for your bike's drive train.

Volume (ml)

Application Type

Condition

Intensity

Disc Brake Compatibility

Frequency

Here's our advice for the best results on your chain/drive train: Apply the degreaser with a paintbrush or your chain cleaner.
Scrub hard-to-reach spots with a brush (drive train rollers, cassettes).
Leave for a few seconds before rinsing with water until all residue and black marks disappear. Then dry the chain and drive train with a microfibre cloth or compressed air.
You can then lubricate the parts.

Advice from our team: 

If you use a brush to apply this degreaser, you'll need about 25 ml (1 oz.) of product for a good application (about 20 uses with this bottle).
If you use this degreaser with our chain cleaner, you will need 9 ml (1/3 oz.) per use (i.e. 55 uses with this 500 ml (1/2 qt.) bottle).

How much degreaser should you use?

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This plant-based degreaser is designed for doing step 1. Once you've applied the degreaser, spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

How to use this product: 

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Maintenance advice: 

Prevent any contact with your disc brakes or brake pads.
Protect them with a microfibre cloth.

Precautions:

500 mL (1/2 qt.) container = approx. 15 uses

User tip: 

This product has been designed, formulated, produced, and packaged in France.

Did you know?

Made in:

Capacity:

Bike Tools

Quickly and easily clean any type of chain with a single cleaner!

Compatibility

Using the chain cleaner is quick and easy, and becomes a real pleasure.

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

Features: 

Weight:

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.


Parts: 

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Skill Level

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

onlyonline

Robustness

We designed these 2 brushes for deep cleaning your bike.

Use the large brush in the most difficult-to-reach areas of your frame to avoid scratching, especially if you have a matte paint finish.
We recommend testing the large brush on a small area before using it on the rest of the frame.

Advice from our team

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

A precise, durable, reusable spray nozzle

Use the cleaning spray on all of your bike's parts.

Versatility

This bike cleaning spray is designed for cleaning your bike without harming the paint or any parts.

This bike cleaner is designed for doing step 2. 
Remember to degrease your drive train before spraying the cleaner onto your bike (step 1). Next, spray on the cleaner, rinse it off and dry your bike (step 2) before applying your chain lube (step 3). Your bike will then be as good as new.

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

The spray nozzle used for this product is very precise, specifically designed to be used with bikes, and extremely durable. In fact, it can be used to spray on more than 50 L (44 qt.) of bike cleaner. Because of this, we've created a 1 L (1 qt.) refill that avoids you having to throw away the spray nozzle.

Danger! Cause skin irritation. Causes severe eye irritation. Keep out of reach of children.Wear protective gloves and eye / face protection. 
In case of contact with eyes: Rinse cautiously with water 
for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Warnings:

700 x 35 to 700 x 45 tires. 48 mm (2") valve. ETRTO 35/45 – 622

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Designed for replacing the inner tube of your 700 diameter, 35 to 45 section tires with a 48 mm (2") Schrader valve.

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 700 x 35 means that the tire is 700 mm in diameter and 35 mm wide.
The dimensions in mm are also on the tire sidewall.
For example, 36-622 means that the tire is 35 mm wide with a 622 mm inner diameter (approx. 700 x 35).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Bike Tubes & Valves

100 mm diameter pressure gauge accurate to 1 PSI.

Precision

Power

The 260 mm metallic base provides excellent stability

Stability

Repair

We developed the 900 pump so you can easily pump your bike tires up to 10 bar or 145 PSI.

Weight (g)

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

Main Material

The 900 bike foot pump will be your go-to for inflating your bike tires as easily as possible. Its oversized pressure gauge (100 mm) and accuracy of 2 PSI (or 0.2 bar) mean you’ll always have the optimal pressure in your tires to maximize performance, grip, and comfort, no matter the terrain!
There’s also a visual marker to make it even easier to read when visibility is poor.

Inflation precision

The 900 foot pump has a 32 mm diameter cylinder, making it a breeze to build up pressure in your tires.

Easy inflation

The connection head has an ergonomic lever and markings with clear positions to easily differentiate between the actions of inflating / connecting. The intuitive design improves the user experience, ensuring a flawless inflation process and increased safety with the pinch-free lever.

Intuitive ambidextrous bow

The handle on this pump was designed for an excellent and comfortable grip.

Ergonomic handle.

The metal base and design of this pump make extremely stable.

The 900 bike pump has been awarded a Red Dot as part of the Red Dot Design Award 2024.

Product with a design award.

Bike Pumps

Replacement chain for your 9-speed bike. Compatible with 9-speed Shimano, Campagnolo, and Sram derailleurs

Number of Speeds

Number of Links

For easy assembly, adapt chain length with a chain tool available on our website (ref: 8351521)

Mounting

For easy dismanteling, use a quick link chain tool and/or a chain tool available on our website (ref: 8352339 and 8351521)

Dismantling

Number of links

Bike Chains

Compatible with 11-speed drive trains and Shimano LG-500 chain for Cues

Replacement chain for your 11-speed bike. Compatible with 11-speed Shimano, Campagnolo, SRAM, and Shimano Cues derailleurs

Assembly

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

Insert directly between the chain's links.

Quickly and easily read the degree of wear on your bike's chain.

Designed for easily and quickly measuring the degree of wear on your bike chain.

Place your bike on your workshop stand (for greater comfort) or against a wall.
Insert the left-hand side of the tool into a link on your chain (make sure the small hook is well inserted into the link), then lower the right-hand side onto the chain to read the result.
Once it has been properly installed on your chain, the chain wear indicator should lie as flat as possible.

How to use this tool

If the tip of the tool (the right-hand part) does not go beyond the line above the "OK" sign, then your chain and cassette are in perfect running order.
If you press the right-hand tip of the tool in between the 2 lines of the "1", then you need to change your chain.
If you press the right-hand point of the tool beyond the line at the start of part "2", then you need to change your chain and cassette or freewheel.

How to read your result

It all depends on how often you ride.
We recommend that you check the condition of your chain once a month to ensure that your gears shift smoothly and that you don't wear out your cassette or freewheel prematurely. That way, you don't have to change them more quickly than necessary.

How often should you use the tool?

Maintaining your drive train ensures that your gears shift smoothly, extends the life of your components, and eliminates unwanted noise. We advise you to follow the 3 recommended steps:
01) Degrease your drive train;
02) Clean your bike;
03) Lubricate your chain. 
You can find all our maintenance products on our website or in our stores.
Testing your chain wear regularly will prevent premature wear of your drive train.

This chain wear indicator is a precision tool. If the tool is dropped, this could affect its precision and the result obtained. 
Be careful when handling the tool and protect it from being dropped.

Length: 12.27 cm (5")
Height: 2.65 cm (1")
Thickness: 2 mm (7/100")
Weight: 29 g (1 oz.)

Product characteristics: 

Made in: 

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

Pro tip

This degreasing brush allows for an efficient application of your degreaser.

This brush is ideal for applying your plant-based degreaser to your bike's drive train (chain, derailleurs, cassette, etc.). 

Type of Brush

To ensure optimal maintenance, we recommend that you follow these three steps: 
1) Degrease your drive train
2) Clean your bike
3) Lubricate your chain

With this bike degreasing brush, you can apply your plant-based degreaser to your drive train and complete Step 1.

How to maintain your bike

This brush comes with a protective cap, allowing you to place it easily on a workbench or shelf, protect the bristles from being crushed, and keep your toolbox clean.
Do not pour degreaser directly into the brush, as it may overflow when inserting the brush, leading to unnecessary waste.

Each tool is designed to help you repair your bike correctly. 

Compatible with all types of bikes: MTB, hybrid, road, and city.

Fitted with foam inserts for easy opening and closing.

Easy opening/closing

The Start repair kit includes everything you need for basic bicycle repairs, making it easy to handle the most common jobs. 

The Start repair kit contains 19 tools:
- Pedal wrench
- Chain wear tester
- 2 tire levers
- L-wrench with bit carrier
- 10 multitool inserts (PH1, PH2, T25, T25, Allen 2/2,5/3/4/5/6/8)
- 4 plugs (8, 9, 13 and 15 mm)

Toolkit description

- Tire levers 
A sturdy, handy pair of tire levers for removing tires and inner tubes in just a few moves. They work for all types of tyres and bikes: MTB, hybrid, road, and city.
- Chain wear tester 
Measures chain stretch over time so you know exactly when to replace your chain to prevent premature wear on your cassette.

Contents (part 1)

- L-shaped wrench and bit set 
A versatile multitool with 10 bits for tightening and loosening bike components. Offers broad compatibility and peace of mind when you go out for a ride.

- Pedal wrench 
Designed for installing or removing pedals. The handle is longer than on our previous model, giving you extra leverage for easier adjustments.

Sports/

Cycling/

Bike Tools and Components/

Bike Tools/

decathlon

Dry Weather Bike Chain Lubricant - 100 ml