Comfort temperature between 0°C and 5°C. 
240 g/m² density fleece.

Warmth

Silicone grips and reinforcements on the palm and fingers for easier handling.

Dexterity

Touchscreen-compatible thumb and index finger.

Tactile efficiency

Breathability

The fleece material allows these gloves to dry quickly in the open air.

Quick drying

These thick fleece gloves protect kids’ hands from the cold while hiking. 

Maximum washing temperature 30°C. Normal cycle.

Waterproof

Options

Condition

Windproof

Frequency

reinforced area

Tightening Type

Main Material

Thermal tests are carried out based on skin temperature measured from the finger to capture the wearer’s thermal comfort depending on the glove worn and the outdoor temperature. This is based on skiing and hiking activity.
The temperature range is calculated to provide 70% of users with thermal comfort.

How will these gloves keep my child’s hands warm?

Fleece is designed to trap air thanks to the volume created by its texture. This air acts as a natural insulator, keeping the body warm. It is the brushing of the knit fabric that traps the air.

How does the fleece protect from the cold?

In the same way that wearing several layers of clothing keeps you warm when hiking, you can wear liner gloves under your gloves to keep your hands warm. This multi-layer system creates air pockets around your hands, efficiently insulating them from the cold.
Remember to wear large enough gloves so your fingers do not become constricted. Compression reduces blood circulation and can make your hands colder.

How to effectively protect your hands from the cold

When active, your body generates heat that’s trapped by your clothing’s thermal insulation. If the clothing is inadequate, your body cools and the blood flow to the hands and feet drops in order to keep your upper body warm. Your outfit therefore has a role to play in keeping your hands as warm as possible.
If you’re unsure about size, it’s always better to choose a pair of gloves that are slightly too big.

How to keep your hands warm with the right clothing

If this happens then dry them in a dry place but avoid placing them on a heat source. Heat can damage the fabric and cause them to lose their shape.

Did your liner gloves get wet?

Winter Hiking Gear

Double-sided microfleece. 200 g/m² density for optimal warmth. High collar.

Polyester knit: lets the body's moisture pass through (RET=6.3). 
Full zipper.

Lightweight

Pockets

Machine washable at 30°C, quick drying, and crease-resistant.

Ease of Maintenance 

A zippered fleece jacket that will become your child's best friend for staying warm on outdoor excursions. 

pattern

Collar Type

Number of Pockets

Pocket

Type of Length

Customization

Hood

Style

Zipper Type

A warm fleece is good, but a warm, stylish fleece is even better! This fashionable fleece has a colour block look your child will love. We also added 2 zippered pockets for kids to store small items safely. 

Your child will love this fleece 

Your kids need to stay warm during their outdoor activities. With this fleece, there's no need to worry. The fleece fabric traps air, creating an insulating barrier.

A fleece that parents will love

If their clothes are not breathable, kids can quickly get too hot when they’re playing. We selected a breathable fabric that wicks away moisture even at high activity levels so this fleece jacket remains comfortable.

A comfortable fleece for high-intensity exercise

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET of 6.3.

What is the RET index?

This fleece is available in the following sizes: 
- Age 7-8 
- Age 8-9 
- Age 10-11 
- Age 12-13 
- Age 14-15 

What sizes are available?

Wash the fleece at 30°C on a synthetics cycle to avoid damaging it. Wash it inside out with the pockets closed. To protect the fabric, do not exceed a 1,000 rpm spin speed. Do not tumble dry.

How should I care for this zippered fleece? 

Kids' hiking shirts

Filling: Bust 150 g/m²
Sleeves and hood 100 g/m². 
Between -5 and -10°C.

Weighs only 390 g (13.8 oz) in size 8–9 years.

Light rain protection: water slides off fabric, giving you time to take shelter.

Water repellent

Is it getting colder? This lightweight padded jacket provides a good level of warmth for children aged between 7 and 15 years old. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

Weather Conditions

sleeve length

Pack

thumb pass

Water repellency is the ability of a fabric to let water run off its surface without absorbing it. This means that the fabric does not soak up water, and therefore remains lightweight, breathable and warm. A fabric becomes water repellent by applying a treatment to its outer surface regularly (we recommend every three washes).

What is water repellency?

Kids' Hiking Jackets

clearance

Thin enough to fit easily in a pocket or backpack.

Compact design

Inner label for writing your child’s name.

This lightweight, stretch-knit hat is perfect for kids who want to stay warm in style!

Skill Level

reflective

Reversible

Beanie Length

Type of Beanie

Water-Repellent

For the Wedze models, the kids’ size is for head sizes between 52 and 56 cm. Depending on the elasticity of the weave, this measurement can vary slightly. 
For a child whose head size is between 48 and 52 cm, choose a child's model first. Finally, for a child with a head size below 48 cm, choose a baby hat.

Child sizes

Kids' Ski Clothing

Waterproof coating for 2 hours of protection (5,000 Schmerbers), 100% WTP seams

Hydrophilic coating (RET = 12): limits condensation inside the garment.

The elastic waistband and loose fit make them easy to put on over pants.

Freedom of movement

Only weighs 146 g (5 oz.) in size 10–11 years.

Designed to protect your child from the wind and rain.

belt height

Place of Practice

modular

Type of Bell

Schmerber

Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: Little breathability.
 
Our product has a 12 RET rating.

Component breathability

A fabric is water-repellent when water slides off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment’s lifetime (every 3 washes). 

Component waterproofing

Technical details

Kid's Hiking Pants

140 g/m2 fleece. Thermal comfort between 0°C and 5°C.

Polyester knit allows moisture to evaporate.

The fleece material allows these gloves to dry quickly outdoors.

Keep your children’s hands warm: the insulation provides comfort at temperatures between 0°C and 5°C, with 140 g/m² fleece.

The fleece traps air to insulate. These gloves keep children’s hands warm on chilly days. Thermal comfort between 0°C and 5°C

Why wear fleece gloves?

The thermal resistance test measures the loss of heat between the body and the outside, indicating the insulating properties of the product. It’s carried out on a thermal hand via sensors that measure body heat.

How is thermal comfort measured?

These polyester knit gloves combine warmth and breathability. Designed to allow water vapour to wick away, they keep your hands dry, even during intense activities.

Why are these gloves breathable?

The other advantage of fleece material is that it dries quickly. Ideal for all your child’s adventures.

Will these gloves dry quickly?

This pair of fleece gloves weighs only 20 g (0.7 oz) at size 10 years. They can easily be stored in a bag or pockets.

Are these gloves lightweight?

Waterproof protection for 1 hour (5,000 mm) before washing; taped main seams.

Hydrophilic coating (RET=12): reduces condensation.

Ventilated back for greater comfort when hiking.

Ventilation

Weighs 312 g (11 oz.) in size 10–11 years.

This waterproof hiking jacket was designed to protect your kids from the wind and rain.

Maximum wash temperature of 40°C. Normal cycle.

Ventilation Zippers

Sportsperson’s Height

type of waterproofing

breathability (in RET)

Removable Hood

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 1092 standard).The higher the water pressure, the more waterproof the fabric. A component with an impermeability of 5,000 mm will therefore withstand the pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour downpour). Waterproofing is expressed in Schmerber units (for example: 5,000 Schmerbers). This number applies before washing.

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can chill the body during physical activity.

Windproof effect

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric.      
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured by our suppliers in Vietnam, Ethiopia, and Bangladesh.
These are partners that have genuine expertise in making our products and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our jackets come from?

Comfort temperature: -4°C 
Limit temperature: -13.5°C

The breathable, waterproof membrane keeps your feet dry.

SnowContact technology: optimal grip and traction on snow.

Grip

Easy to slip on with their hook and loop adjustment and stretchy laces.

Easy dressing

The location and depth of the 3.5 mm lugs provide traction on snow.

Traction

Boots for playing in the snowy wilderness or in the playground in winter. 

type of lining

Type of Shoes

Removable Sole

Season

comfort temperature

Shoe Height

Outsole Technology

Playing Surface

Foot Width

We carry out comparative studies in a thermal laboratory in walking conditions with low wind (5 km/h). This is how we measure the thermal resistance of our boots. However, every individual feels the cold differently. Comfort temperature: felt slightly cold and 70% of users find the thermal sensation acceptable on their feet.
Limit temperature: felt very cold and 10% of users consider the thermal sensation acceptable on their feet.

Will these boots be warm enough for your child’s winter hikes?

These boots have a membrane to guarantee waterproofing and breathability. A membrane is a very thin component applied to the inner surface of the fabric that prevents water from entering while allowing moisture to escape.
We tested this product in a laboratory simulating walking with the feet half immersed.
This shoe model was tested for up to 8,000 flexes, equivalent to 16 km of walking.

Are my boots 100% waterproof?

The material and tread of SnowContact soles are specifically designed for optimal grip and traction on snow. SnowContact soles are more effective on snow than traditional soles. When walking on ice, adding crampons to your boots is the only way to ensure optimum safety.

What are the advantages of SnowContact technology?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, UV resistance, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use in the long term?

To stay warm when hiking in the winter, we recommend: 
Warmth: wear warm socks (ideally with a good percentage of wool).
Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of your socks should correspond to the height of the boot—for more protection, choose higher socks.

How do I choose the right footwear for hiking in the snow?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of the boots

Boots can become heavy if you wear them in wet conditions (through condensation and perspiration).
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing them regularly. The paper will absorb the moisture and the boots will dry faster.
Never place your boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Toddler & Kids Hiking Shoes

This dual-material neck warmer effectively protects from the cold.

Two fabrics mean it can be worn six different ways.

Flexibility

When worn over the nose, it provides effective moisture wicking.

Moisture management

This neck warmer is practical and easy to use. The dual materials mean kids can easily adapt the warmth around the neck.

Maximum wash temperature of 30°C. Very delicate cycle.

The Hug Neck Warmer packaging shows six different ways to wear it (hat, balaclava, neck warmer, etc.).

Polyamide fabric reinforcement reduces abrasion and increases heel stability.

Abrasion resistance

Terry knit under foot  for a more comfortable fit

User comfort

Asymmetrical fit (left and right socks) for improved alignment.

Anatomic design

Knit stitch reduces blisters at the metatarsals and heel.

Reduced chafing

Designed for hiking in cold weather. These socks offer maximum comfort and warmth with the inside of the foot knit in merino wool.

height of the sock

thickness of the sock

reduced chafing

Sock Height

Type of Socks

shoes with left or right mark

Packaging

Wool fibres can store a lot of air and let water vapour escape, making wool an excellent choice for moisture management and thermal regulation. Wool’s ability to store and release moisture make it an insulating, comfortable material for hiking socks.

The properties of wool

The merino wool, from Spain, has been a carefully selected breed for generations because of its wool. It provides a softer fibre than traditional wool. After shearing, the wool is cleaned to remove impurities, then carded, spun, and finally used for knitting or weaving.

What is merino wool?

Merino wool offers an unbeatable experience: soft, lightweight, and breathable. Thanks to its fine fibres, it provides natural thermal regulation. It keeps your feet warm in cool weather and cool in warm weather.

What are the benefits of merino wool?

To stay warm when hiking in the winter, we recommend: 
- Warmth: wear warm socks (ideally with a good percentage of wool). 
- Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
- Boot height: the height of your socks should correspond to the height of the boot: for more protection, choose higher socks.

These socks come in packs of 2 pairs of matching socks.

quechua

Kids’ Padded Hiking Jacket, MH 500 Age 7–15