Men’s Waterproof Hiking Jacket – MH 500

Waterproof

Storm protection. 3-layer membrane. 20,000 mm water (Schmerber).

Breathability

29 cm (11”) side openings and component that wicks away perspiration (RET = 6).

Lightweight

Only 574 g (20 oz.) in size L.

Anatomic design

Drawstring at the hem, adjustable sleeves, adjustable hood.

Pockets

2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocket.

Compact design

Lightweight, compressible fabric saves weight and space in your backpack.

Cut

Slim fit with raglan sleeves and good stretch properties for plenty of freedom of movement during your hikes. A warm layer, such as a fleece or a lightly padded jacket, can be worn underneath.

Hood

Elastic drawstring and tightening toggle for easy adjustment. Integrated semi-rigid visor provides high-level protection. The small detail that makes the difference: a triangular opening on the side of the hood for better visibility.

Main component

3-layer material with membrane.

Membrane

The waterproof rating depends on two key criteria: component and construction. This product was made with a membrane. The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof and breathable. It is flexible, lightweight, and breathable.

Layer design

3-layer design: The membrane is glued between the outer and inner fabric. We use it for durable, high-performing jackets.

Component waterproofing

Laboratory tests are conducted to guarantee the waterproof rating of a component. The resistance of a fabric is measured by the height of a water column in mm. The higher the water pressure, the more waterproof the fabric. This product’s component has a 20,000 mm waterproof rating and can withstand the pressure of a 20,000 mm water column. This is equivalent to 20,000 Schmerber.

Water resistance of the jacket

We conduct laboratory tests that simulate rainfall to guarantee the jacket’s waterproof rating. This product was validated in a shower test under 18 cm of rain for 2 hours. This test reproduces the average conditions of a mountain storm.

Breathability

Component breathability is measured by its thermal evaporative resistance (RET). This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. The lower the RET, the more breathable the fabric. RET ≤ 6: very breathable fabric RET ≤ 12: breathable fabric RET ≤ 20: not very breathable fabric This product as a RET of 6.

How to restore water repellency

A fabric is water-repellent when water slides off its surface without being absorbed. Because the fabric doesn’t soak up water, it remains lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Water repellency can be reactivated by putting the item in the dryer for 10 minutes on low heat. You can also use a waterproofing spray (ref.: 8554908).

Product design: our outdoor experts

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.