Parameter measurement

Monitor your speed and cadence. Connect it to a cyclometer/bike GPS or a smartphone/tablet. Mounts easily.

Skill Level

To preserve your battery life, we’ve added a plastic tab underneath the battery.

So before your first use, you’ll need to open the battery compartment and remove the plastic tab.
Note: Don’t forget to set your sensor to either cadence or speed mode!

Step 1: First use

To change from speed to cadence, just remove and reinsert the battery.

- The green light means you’re in speed mode
- The red light means you’re in cadence mode

You cannot use both modes at the same time. If you want information about both speed and cadence, you’ll need two sensors.

Step 2: Choose cadence or speed mode.

For cadence mode: Place the sensor on your bottom bracket. 
For speed mode: Place the sensor on the hub of your wheel.

Step 3: Installation

To connect it, turn the pedal a few times to “wake up” the sensor.

- Use with an app: 
This sensor connects with all devices using ANT+ and/or Smart Bluetooth technologies. Follow the connection instructions using the menu of your app.

- Use with a cycle computer/watch: 
Use the settings on your device to connect it.

Step 4: Connection

Detection threshold

After installing the battery, the sensor can typically be used for 500 hours, but there may be differences related to temperature or environmental factors. 

When the sensor is not connected for use, be sure that it isn’t installed on the bike, as this will cause the sensor to wake up frequently and drain the battery faster.

Power:

To reduce energy consumption and extend its life span, if the sensor does not detect any data for 60 seconds, it will go into sleep mode. It will automatically wake up and start transmitting data when activity resumes.

Energy saving

1 cadence sensor
1 rubber clamp for the bottom bracket (cadence: mode)
1 rubber clamp for the hub (speed mode)
1 CR2032 battery

In the box

Cyclometers & Cadence Sensors

For Shimano SPD-SL road-compatible shoes and cleats. 

Compatibility

Grip

Versatility

Two-part cleats so you can change them while maintaining your settings. 

Easy assembly/dismantling

Capacity

Our design teams have developed these Shimano SPD-SL-compatible cleats with 6° angular float. 

Playing Surface

Toe Clip Type

Bike Pedals & Cleats

Moisture management

Very close-fitting cut with silicone thigh bands

Stability

Lightweight design: 170 g (6 oz) in size M

Lightweight

Designed for performance-minded cyclists who ride in warm to hot conditions (15–35°C).

Maximum washing temperature 30°C. Normal cycle.

Season

reinforced area

Number of Pockets

retaining strip

belt height

Weather Conditions

Reversible

Stitching Type

Pocket

Type of Length

Style

Zipper Type

Main Material

The idea behind the RCR bib shorts is to create high-performance cycling shorts that provide just the right amount of compression while giving you plenty of freedom to move as you ride.
Whether you’re heading out for a quick spin or a long-distance effort, these cycling shorts offer consistent performance without compromise.

The ultimate competition cycling shorts

This Performance-level pad offers a more anatomical fit and improved protection across the pelvic area. Perforations on the top improve breathability, while firm high-density foam beneath the top layer boosts comfort and support for up to five hours in the saddle on long-distance rides. Rhombus fabric helps prevent bacterial growth.

Elastic Interface ® RCR 2.5 HD pad


Dimensions: L: 360 mm (14.2 in), W: 180 mm (7.1 in)
Composition: 
Rhombus 75% PA; 5% PL; 20% EA
D60 foam (60 kg/m3 polyurethane foam) 
D120 foam (120 kg/m3 polyurethane foam).

Elastic Interface® pad size and composition

Machine wash at 30°C. Synthetic cycle. Turn the product inside-out.Use only a small amount of detergent.Do not add fabric softener. Hang-dry in a warm, ventilated area. Do not tumble dry. Do not dry clean. Do not bleach. Do not place on a heater to dry. 

Care instructions

Men's Sports Shorts

Frequency

seat post diameter

Diameter: 27.2 mm
Length: 130 mm
Tilt adjustment: No
Material: aluminium and steel
Clamp torque: 8-10 Nm
Insertion limit: Yes

Technical features

Take care not to exceed the insertion limit of the seat post in your frame. Ensure that the seat tube is clean. 
Put a bit of grease on the post to make it easier to slide and prevent water or dust from getting into the frame.

Assembly tips

Remember to retighten the screws on the saddle clamp regularly to keep comfortable in the saddle and prevent premature wear.


The technicians at your Decathlon store workshop are ready to assist with bike part replacements. Feel free to ask for help!

Need help?

Bike Saddles

Each tool is designed to help you repair your bike correctly. 

Ease of use

Compatible with all types of bikes: MTB, hybrid, road, and city.

Fitted with foam inserts for easy opening and closing.

Easy opening/closing

The Plus repair toolkit includes everything you need to take care of your drivetrain and brakes. A great way to pamper your bike and do more things yourself. 

Condition

The Plus repair kit contains 8 tools:
- Quick-release clasp
- Crimping pliers for cables and housings
- Chain tool
- 8 mm Allen key + adaptor
- Freewheel remover (lug wrench)
- Cassette remover 
- Chain whip

Toolkit description

- Chain tool 
Used to remove, shorten, or repair chain links safely. Place the link to be opened in the recess on the tool. Once the chain tool screw is aligned with the rivet, turn it to push the rivet out.

- Cable and sheath cutter
Crimping pliers for cutting brake cables, brake housing, or derailleur housing cleanly and safely.

Contents (part 1)


- Quick-release clip
Used for removing and installing the chain’s quick link. Makes it easy to remove links during repairs. 
- Freewheel remover
Removes the rear freewheel. Works with a 24 mm flat spanner or 8 mm Allen key.
- Cassette remover
Used for replacing a worn cassette or adapting the transmission. Works with the same tools as the freewheel remover.

Contents (part 2)


- Chain whip
Essential for locking the cassette during disassembly to prevent it from rotating.
Compatible with most multi-speed cassettes. The numbers 10, 11 and 12T on the tool refer to the number of teeth on the smallest sprocket. Count the teeth on your smallest sprocket and set the removable pin to the matching number to lock the cassette before loosening it.

Contents (part 3)

An intuitive layout keeps every tool in its place.
The snug foam insert eliminates the hassle of tools falling out when you pack up—each tool fits neatly and stays secure, even when the box is closed.
The Plus toolkit is also designed to complement the Start and Ultim toolkits.

Product benefit

Our toolkits are designed to help you carry out your own bike repairs and maintenance, from the most basic jobs to the most technical.
The Start kit covers essentials such as repairing a puncture, adjusting the saddle or derailleur, and changing pedals or tires. 

The Plus kit takes you further, letting you replace the chain, cassette, brake cable or derailleur. 

The Ultim kit, designed for experts, allows you to change a bottom bracket, remove a wheel or service a hub.

Note

If you run into any issues, our technicians at your nearest Decathlon store will be happy to assist.

- Length: 32 cm (12.6″)
- Width: 16 cm (6.3″)
- Height: 4.5 cm (1.8″)


Dimensions

Lost or damaged one of your tools? No problem. Just order the broken or missing part on our website.

Repairability

Bike Tools

Compatible with bikes equipped with bottle cage screws.

Designed for carrying a water bottle on your bike.

Assembly Type

Position

Bike Hydration

The table is designed to be as close as possible to the bike handlebar

Ergonomic grip

This stand was designed to give you the best possible experience when doing turbo trainer workouts.

incline simulation angle

measurement accuracy

descent simulation

Resistance Type

Maximum Power (W)

Communication Protocols

Connectivity

turbo trainer technology

Its shape lets the Van Rysel Home Trainer table sit nice and close to your bike. You can position your computer and everything you need for your turbo trainer session within arm's reach. 
The table's frame design also allows you to place a fan underneath, without disrupting air flow.Its triangular shape means you can use the corners of a room if you like!

Perfect integration and great ergonomics.

The tray surface includes: 
- two slots, one for a phone, the other for a tablet, designed for demanding users, with a hole at the base of each slot so you can charge up your devices.
- A bottle holder
- An elegant surface for your computer

A tray designed for you

Tray dimensions = 67 cm x 37 cm (26 x 14 1/2")
Dimensions on the ground = 64 cm x 57 cm (25 x 22")
Height = 94 cm (37")

Dimensions

Bike Trainers

100 mm diameter pressure gauge accurate to 1 PSI.

Precision

Power

The 260 mm metallic base provides excellent stability

Repair

We developed the 900 pump so you can easily pump your bike tires up to 10 bar or 145 PSI.

Valve Type

Weight (g)

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

The 900 bike foot pump will be your go-to for inflating your bike tires as easily as possible. Its oversized pressure gauge (100 mm) and accuracy of 2 PSI (or 0.2 bar) mean you’ll always have the optimal pressure in your tires to maximize performance, grip, and comfort, no matter the terrain!
There’s also a visual marker to make it even easier to read when visibility is poor.

Inflation precision

The 900 foot pump has a 32 mm diameter cylinder, making it a breeze to build up pressure in your tires.

Easy inflation

The connection head has an ergonomic lever and markings with clear positions to easily differentiate between the actions of inflating / connecting. The intuitive design improves the user experience, ensuring a flawless inflation process and increased safety with the pinch-free lever.

Intuitive ambidextrous bow

The handle on this pump was designed for an excellent and comfortable grip.

Ergonomic handle.

The metal base and design of this pump make extremely stable.

The 900 bike pump has been awarded a Red Dot as part of the Red Dot Design Award 2024.

Product with a design award.

Bike Pumps

Power: 15 lumens. Continuous mode.Certified for road use.

Visibility

Visual efficiency

Continuous mode 8 hrs.
No flashing mode.
USB-C rechargeable.

Autonomy

Quarter-turn Garmin-type mount for seat tube  
Vertical or horizontal

IPX4 rating: Withstands splashes and heavy rain.

Waterproof

This USB-rechargeable rear light was designed to be seen from behind! It grows brighter as you lose speed.

Power Capacity

Brightness (Lumens)

reflective

Rechargeable

Lighting Type

Type Light

Sold In Set

Type of Battery

type of rear visibility

Autonomy (H)

Hook Type

Power Type

Range (m)


Every detail was designed with one purpose in mind: the cyclist's safety.
Featuring a special lens that not only focuses the light but also allows you to BE SEEN from up to 400 metres (1,312 ft) away.For the same power, approved lighting makes you more visible than non-approved lights.
It has a deceleration sensor that makes the rear light brighter when you slow down, to alert other road users.

Safety for everyone

Whether positioned vertically or horizontally, the RL 930 light adapts to your needs with its quarter-turn Garmin-type mounting system.

Attach it any way you like!

The battery warning light comes on minutes before your light runs out of power.The warning light flashes red. It takes 3 hours to fully charge via its USB-C cable when plugged into a computer or 5 V 500 mAh adapter.

USB charger

If the product remains unused for an extended period, the battery may undergo a safety shutdown.Remember to charge it every 3-4 months when not in use. 

In addition, avoid leaving your lights somewhere cold for long periods. Batteries don't like the cold as it makes them lose capacity, so they won't last as long.

Look after your lights


If needed, spare parts for this product are available from the after-sales department and on our website.

A long life

Lithium battery capacity of 730 mAh (500 cycles guaranteed)
LED light power: 15 lumens. Fastener included.
USB-C

Technical specifications

Lights

clearance

Suitable for all types of wheel (except fat bikes).

Wide zippered opening.
Storage pocket for your QR skewer

The foam on the inside provides great protection

Impact protection

Need to protect your bike wheel? This bag lets you carry and protect your wheel when travelling or at home.

Intensity

Number of Wheels

Type of Cover

Foldable

Number of Compartments

Fastener Type

Folded: 42 x 33 x 6 cm (17" x 13" x 2")
Unfolded: 83 x 83 x 2.5 (33" x 33" x 1")

Suitcases & Luggages

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Sports/

Cycling/

Bike Tools and Components/

Bike Parts & Components/

Bike Stem, Posts & Clamps/

decathlon

Oversized Bike Stem - 60 mm (31.8 mm)