Tested in 2 hours of moderate rain
16,000 mm Schmerber
Non-waterproof pockets

Waterproof

Breathability

Pockets

Adjustable ankle cuffs can fit right over your boots.

Easy dressing

The flat elastic waistband ensures a secure, comfortable fit.

Anatomic design

The pants easily pack down into a pocket.

Compact design

These waterproof pants were developed for inshore sailing in stormy weather.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Condition

Weight (g)

waterproof seam

Number of Pockets

Type of Brushing Boots

Silent

Stitching Type

Windproof

Pocket

Type of Bell

Style

Water-Repellent

With Straps

Main Material

Ventilation Zippers

Skill Level

Frequency

reinforced area

shoes cover

belt height

reflective

Precipitation

Weather Conditions

Reversible

Place of Practice

modular

breathability (in RET)

Type of Length

Schmerber

Fastener Type

We measure the water resistance of a fabric in mm (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Resistant to water pressure of 2,000 mm before and after ageing (5 washes). That’s equal to 15,000 Schmerber (the average pressure exerted during rainfall).
These pants were tested in 2 hours of moderate rain (60 L/m²/h).

Waterproof properties

Rinse with clean water after use.
Store in a dry place.
Wash as infrequently as possible to protect the water-repellent treatment.
Wash inside out, pocket zipped, on the synthetics cycle (30°C–40°C) with regular detergent. Do not use fabric softener. Do not overload your machine. Run extra rinse.
Line dry.
To restore its water repellency, tumble dry inside out on the synthetics cycle for 10–15 min.

Care instructions

Breathability
To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the resistance, the more a fabric allows the body’s perspiration escape.
- RET < 9 = extremely breathable
- RET 9–12 = very breathable
- RET 12–20 = breathable
- RET > 20 = not very or not at all breathable

Men's Rain Pants

100% taped seams. 
2-layer coating. 
5,000 mm Schmerber

Fabric specially coated to reduce the cooling effect of the wind.

3 closed pockets, including 1 inside 
(non-waterproof pockets).

Highly breathable coated fabric (RET < 12) to reduce condensation.

Especially treated so water slides off the fabric surface.

Water repellent

Zippers resistant to salt water and sea air.

Water resistance

This women’s waterproof jacket is designed for inshore sailing in wet, stormy, and windy conditions.

type of lining

type of waterproofing

type of hood

thumb pass

Removable Hood

Hood

Zipper Type

Snow Skirt

Collar Type

sleeve length

Membrane Construction

Lining Material

Pack

We measure a fabric’s resistance to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to water pressure of 5,000 mm before and after aging (5 washes). This equates to 5,000 Schmerber average pressure exerted by the water during rain.
The jacket’s waterproofness was tested in a rain shower with 60 litres of water/m²/hour for 2 hours.

- High collar
- Injection-moulded plastic to avoid salt oxidation
- Water-repellent components (water runs off the fabric)
- 100% taped seams
- Central opening features a flap with a drainage channel for optimal waterproofing

Jacket waterproofing

The hood is attached and 
adjustable for height and depth. It does not tuck away into the collar.
Visor with a headband to provide a good level of protection and a better hold.
The high neck effectively protects the neck.

2 zippered pockets on the front to put your hands or items and 1 inner right-chest pocket with hook-and-loop fastening. Note: The pockets are not waterproof.

The full-length zipper includes an inner flap that protects you from wind and water,
and the collar has a soft flap to shield your chin.

Front zipper

To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the fabric’s resistance, the more moisture is evaporated, and therefore the higher the fabric’s breathability.
For example:
RET < 9 = very breathable;
RET 9–12 = breathable.
This jacket has two components with the following RET values:
> more resistant fabric: RET < 12 (or 3621 g/m²/24 h)
Lighter fabric: RET < 8 (or 2972 g/m²/2)

This jacket stays lightweight and breathable in wet conditions because 
the treated fabric repels water instead of letting it soak in. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered.
To revive it, simply tumble dry the jacket for 10 minutes on the lowest heat setting.

Water repellency

Wash sparingly to help maintain the jacket’s water-repellent properties.
Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Select a synthetics cycle (30°C–40°C) and use regular detergent. Do not use fabric softener or bleach, as these can damage the coating. Always run a full or extra rinse cycle.

Washing the jacket

Drying is a crucial phase in reactivating the water repellent treatment.
First, lay the garment flat on a drying rack. The heater? Forget it!
Once dry, put it in the tumble dryer on a short synthetics cycle (10–15 minutes), then turn it right side out. Caution: Avoid over-drying.

How to reactivate the jacket’s water repellency

Women's Hiking Jackets

Sole’s material and geometry helps drain the water through channels

Grip

Easy removing thanks to the collar structure and the heel lug

Lightweight material, now just 456 g in size 2/2.5

Lightweight

These waterproof boots are designed to keep your child’s feet dry on a boat, in the rain, or even on a trip to the seaside.

marking outsole

Removable Sole

Season

Sock Height

Reinforced Rubber Boots

Boots Type

shoes with left or right mark

Playing Surface

Foot Width

Boot Height

Sole Type

Tightening Type

These boots are lab-tested to verify waterproofing, then tested in real-life conditions.
The boot’s one-piece construction ensures that no water can enter.

Fully waterproof

We developed a scale to measure and rate the traction of our products in the lab.
Traction is determined by the material and design of the sole. This product has a grip level of 3 out of 5.

How do you measure the grip?

This model comes in double sizes. It’s important to choose a size that fits snugly when you’re wearing your usual socks.
A boot that’s too big may not provide enough support or traction, and can cause chafing.

How to choose the right size

The top of the boot features a ridged strip that provides extra grip while you’re pulling it on.
The heel has a lug that you can push down to remove the boots easily, even while standing.

Easy to pull on and off

If water gets in through the top of the boot, remove the insole, rinse out the boot, and dry thoroughly by placing it upside down over a broom handle. Dry in a well-ventilated area. Turn the boot over and slip it onto a broomstick.

How to dry your boots

The boot’s collar may seem wide compared to your child’s calf. This is intentional. The collar should be roomy so your child can put their boots on without your help. The collar must leave enough space.
This design choice helps your child become more autonomous.

Wide collar

Size 2/2.5: 
Boot weight: 456 g (16,1 oz)
Outer boot height: 22 cm (8.7 in)
Inner height: 20 cm (7.9 in)
Width: 35 cm (13.8 in) at calf.

Lined for extra warmth and comfort.

The moulded, removable sock liner is machine washable.

Do not wear barefoot. Avoid wearing shorts, rubbing can irritate children's calves.

Technical features

To clean your boots, simply run them under water and scrub with a sponge. For stubborn dirt, scrub with a little soap and a wet sponge.

How to maintain your boots

Rain boots

Elasticated waistband with drawstring for a secure fit in the waves.

Resistant to impact of waves

Anti-friction and anti-irritation inner mesh for optimal comfort.

Reduced chafing

Short cut for optimal freedom of movement around the thighs.

Freedom of movement

Water-repellent treatment for fast drying and optimal water evacuation.

Quick drying

Swim shorts ideal for occasional beginner surfing or any other water sport.
Swimwear designed for sessions lasting up to 1 hour.

Maximum washing temperature of 40°C. Delicate cycle.

Boardshort Length

Boardshorts is a term used to designate this type of swimwear used in the world of surfing and water sports.
Practical and comfortable, they are suitable for both men and women.
This type of swimwear was created in the 1950s for surfing. In more recent years, they have become a popular style of swim shorts.
The name comes from their use in aquatic board sports, like surfing.

What are boardshorts?

100 RANGE: occasional surfing and water sports. 
Short cut.
Elasticated waistband: Suitable for all body shapes.Drawstring for stability in the waves.
Inner mesh: protects from chafing.
Quick drying.
500/900 RANGE: regular surfing.
Various long cuts, protection from chafing.
Flat waistband: a more secure fit in the waves during duck dives and wipeouts. 
Stretch fabric for freedom of movement.

Boardshorts design

Size guide on product file.
The boardshorts in the 100 range are available in sizes S to XXL.
The 500 and 900 ranges are available in EU sizes 38, 40, 42, 44, 46 and 48.
Your body shape can influence your choice of size.
We always recommend trying on swimwear before purchase. Fasten your shorts and gradually pull them downwards. If they are easy to pull down, it means they are too big and you could be in for a few surprises once you’re in the water surrounded by waves!

How to choose the right size of boardshorts

ELASTICATED WAISTBAND
Helps the boardshorts to fit different body shapes.
SEMI-ELASTICATED WAISTBAND
Provides a secure fit and adaptability for everyone.
FLAT WAISTBAND
Ensures the boardshorts stay in place in the waves during duck dives and wipeouts.
ANATOMIC DESIGN WAISTBAND
Combines the benefits of an elasticated waistband (adaptability to different body shapes) and a flat waistband (stability in the waves).

How to choose your boardshorts according to the waistband

Shorter cuts (between 14" and 17") give you freedom of movement and allow you to do a wide range of water sports, including surfing (for occasional sessions of less than 1 hour).
Longer cuts (between 17" and 20") reduce irritation from the board or wax on the thighs, and at the top of the knees when paddling. These cuts are therefore better suited to regular or even intensive surfing.

How to choose boardshorts according to length?

When surfing, whether it’s due to duck diving or a wipeout, it’s not easy to retrieve and reposition boardshorts that have fallen down while paddling at the same time...
Choosing the right waistband for surfing becomes essential in this case.
Go for an elasticated or semi-elasticated waistband with a drawstring that goes all the way round the waist.
The Hendaia Pocket boardshorts feature a fully elasticated waistband with drawcord.

Wave resistance 
100 range

This has got to be the most important criterion when choosing swim shorts.
It’s not uncommon for a swimsuit or boardshorts to rub and irritate the skin.
Our boardshorts are designed, both in terms of the shapes offered and the assembly methods, to minimise chafing as much as possible during your time in the water. 
On the 100 range of our swim shorts, the inner mesh or briefs help to reduce the occurrence of this unpleasant phenomenon.

Reduced chafing 
100 range

In surfing, bodyboarding and bodysurfing, the legs are working hard, so boardshorts need to not restrict either bending/stretching or kicking.
A two-way (2 horizontal directions) or four-way (4 horizontal and vertical directions) stretch component contributes to this freedom of movement.
A short cut (under 17”) allows enhanced lower body movement and stability.
The 100 range is made from a two-way stretch fabric.

Freedom of movement 
100 range

It’s unpleasant to feel the sand and fabric of wet boardshorts sticking to your skin. To avoid this discomfort, opt for swimming shorts made from synthetic fibres. This type of fabric allows water to evacuate quickly, ensuring the swimsuit dries quickly and reducing the risk of irritation. So make sure you choose materials that are comfortable so you can get the most out of your water activities.

Quick-drying

Surfing Swimsuits, Bikinis & Shorts

Tested in 2 hours of moderate rain
5000 mm Schmerber
Non-waterproof pockets

Maximum wash temperature of 30°C. Very delicate cycle.

anti-uv

We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to 5,000 mm Schmerber water pressure - the average pressure exerted by water during a rainfall.
These pants were tested in 2 h of moderate rain (60 L/m²/h).

Rinse with clean water after use.
Store in a dry place.
Wash as infrequently as possible to protect the water-repellent treatment.
Wash inside out, pocket zipped, on the synthetics cycle (30°C–40°C) with regular detergent. Do not use fabric conditioner. Do not overload your machine. Run extra rinse.
Line dry.
To restore its water repellency, tumble dry inside out on the synthetics cycle for 10–15 min.

Breathability
To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the resistance, the better a fabric’s ability to let the body’s perspiration escape.
- RET < 9 = extremely breathable
- RET 9–12 = very breathable
- RET 12–20 = breathable
- RET > 20 = not very or not at all breathable

Women's Rain Pants

Ultra-thin sole for better contact with the board.

Sensitivity

Polyurethane sole with granulated surface.

Designed for surfing and bodyboarding in water between 12°C and 17°C.

Water Temperature

Neoprene Thickness

When you’re in the water, more than half your body heat is lost through your extremities (feet, hands, head). To stay warm, consider these accessories:

- in water (>17°C) => neoprene socks.
- Cold water (12°C–17°C): High-cut booties and gloves.
- Cold water (7°C-12°C): High boots, gloves, hood, and hooded top.


Stay warm for longer with our thermal accessories!
Each temperature range has its own outfit.

The first factor to consider when choosing a surf bootie is water temperature. Water temperature varies depending on the location and time of year. Keep these guidelines in mind: Water above 20°C. Water between 17 and 22°C. Water between 12 and 17°C. Water between 7 and 12°C. Visit seatemperature.org to check sea temperatures around the world.

Choosing the right boots

Surfing socks should be a very tight fit to ensure the best possible thermal efficiency. Dry gloves should feel like they are too tight when you try them on. Choosing well-fitting socks ensures a better fit and prevents them swelling with water in use.

Choosing a size

The 3 mm surf socks are made of neoprene.
The synthetic lining provides added wear resistance.
Neoprene thickness: 3 mm.
The neoprene is made of an elastomer foam with insulating properties.
We test and guarantee the quality of our neoprene materials.

Materials

We chose a thin and light polyurethane sole to favour contact and sensations with the board. Therefore, this sock is not suited to long approach walks: in such a case, choose the 3 mm Surf bootie.

Thin sole

The seams are stitched and glued to ensure a watertight seal. 
Blind-stitching technology means the thread does not pierce through the neoprene, ensuring watertightness. The lack of threads on the inside prevents irritation and chafing. Patches are strategically placed in sensitive areas to improve comfort and durability.

Watertight assembly

Our surf booties are designed to meet the needs of the most demanding surfers. Our design choices also make them compatible with other water sports such as kitesurfing, windsurfing, sea wading or SUP (stand up paddle boarding). These surf socks, however, are not suitable for windsurfing.

Multi-water sports boots

Our wetsuits are classified by water temperature: Our wetsuits are designed to meet the needs of the most demanding surfers. They’re compatible with many other water sports, including swimming, kitesurfing, windsurfing, wakeboarding, water skiing, and stand-up paddle boarding.

Get the matching wetsuit!

Olaian, Decathlon’s surfing brand, is based in Hendaye, France.
 Our offices are located by the water, which allows us to design a range of accessories and test them immediately.

What is Olaian?

Surfing Wetsuits

94% polarization efficiency. 
Reduces sun glare on water

Polarized

Brown lenses enhance contrast on sunny days

contrast improvement

Sun protection

Buoyancy

Its shape reduces the amount of light entering through the sides

Coverage

High-resistance polycarbonate plastic lenses.

Robustness

Our teams developed these polarized fishing sunglasses to reduce glare in sunny weather.
Their sizing is perfect for narrow faces

decathlon

Men’s Waterproof and Windproof Sailing Jacket, 500