Warmth

Waterproof

Snow skirt and cuff fastening keep the snow out.

Limits snow entering

Pockets: 2 hand, 1 ski pass, 1 inner, and 1 chest.

Pockets

This extremely warm jacket is designed for skiers seeking comfort. It is perfect for cold weather.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Snow Skirt

Ventilation Zippers

Condition

Frequency

type of lining

Season

Number of Pockets

Weather Conditions

sleeve length

Membrane Construction

Windproof

Pocket

Pack

RECCO system

type of hood

thumb pass

Type of Length

Removable Hood

Hood

Style

Zipper Type

Schmerber

Main Material

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

To stay warm and dry, use the 3-layer rule:- Layer 1, a base layer to keep you dry. - Layer 2, an insulating layer to keep you warm. - Layer 3, a protective layer against the elements.

How to dress to stay warm on the slopes

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A water-resistance rating of 10,000 mm means the fabric can resist 10,000 mm of water pressure.
For skiing, we advise components rated between 3,000 mm and 20,000 mm. 

How is the jacket’s waterproofness measured?

We lab-test each of our products to validate its waterproofing value.How do we carry out this test?We fit the jacket on a mannequin that spends a few hours under a shower.
Using this test, we can confirm that the jacket protects you from snowfall or a light rain shower (30 mm/1.2”) for half an hour.

How is the water resistance of a jacket measured?

To optimize your product’s performance and durability, we recommend:

*Machine wash at 30°C on the synthetics setting. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Spin between 800 and 1,200 rpm.
* Dry flat or tumble dry (preferably). This step is very important to fully dry the inner fibres and restore the loft to your jacket.

Care instructions

The model in the photo is wearing a size L and measures 185 cm (6’1”).
Measurements:
 
Chest measurement: 104 cm (41”)
Waist: 104 cm (41”)  Arm length: 45 cm (17.8”)
Inseam: 80 cm (31.5”)

To help you choose the right size

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

Ski Jackets

Mitts made of duck down 85% down 15% feather, recommended temperature -30°C.

Full grain leather palm with leather reinforcement.

Robustness

Down swelling power = 660 Cuin (IDFB international standard).

Compact design

These mountaineering down mitts provide excellent protection from the cold; for use in winter or at high altitude.

Skill Level

Reinforced Palm

Protection Area

Options

Air Temperature

Tightening Type

Duck down 90% down and 10% feather with a fill power of 800 Cuin (IDFB standard). 
*Duck down traceability is guaranteed by the “Responsible Down Standard” certification. This allows us to guarantee that our down comes from ducks raised for their meat, that were neither force-fed nor plucked alive.

Thermal insulation

Size - Circumference of palm

3XS - 16.9-17.7 cm (6.7-7 in)
2XS - 17.8-18.5 cm (7-7.3 in) 
XS - 18.6-19.3 cm (7.3-7.6 in)
S - 19.4-20.1 cm (7.7-7.9 in)
M - 20.2-20.9 cm (8-8.2 in)
L - 21-21.7 cm (8.3-85 in)
XL - 21.8-22.5 cm (8.6-8.9 in)
2XL - 22.6-23.3 cm (8.9-9.1 in)
3XL - 23.4-24.1 cm (9.2-9.5 in)
4XL - 24.2-24.9 cm (9.5-9.8 in)

Size chart

The gloves are tested according to a thermal test protocol, helping us to recommend the gloves' temperature limit. 
Recommended temperature: -30°C

The palm of the mitt is made from leather, with reinforcements making it extra durable for rope or ice axe use.
Wrist cuff fastening, elastic drawstring to adjust mitts on forearm

Durability

Mountaineering Gear

Good: bodymapping for effective moisture transfer and fast drying.

Moisture management

Average: bodymapping integrated into a brushed component (165 g/m²).

Seamless technology: fewer seams to reduce irritation.

Reduced chafing

The component limits perspiration odours. 
Lab tested to ISO 17299-3 standard.

Odour control

Hit the slopes without worrying about the cold with this base layer. A real second skin, it prevents the sauna effect while you’re out doing moderate exercise. 

Maximum washing temperature 30°C. Normal cycle.

Intensity

Collar Type

Place of Practice

anti-uv

The BL 500 soft thermal base layer comes in a slim fit.
It offers a second skin effect with a slim fit that limits chafing.

Polyamide is the strongest of all raw textile materials, even when wet, and it is very stretchy.
Thanks to its natural properties, this breathable fibre provides very good moisture management and good temperature regulation while reducing odours.
These specially textured, super-soft yarns give the fabric a silky, natural feel. Ideal for tight, seamless clothing.

Benefits of polyamide

Thanks to its bodymapping technology and brushed polyamide fibre created with I-Soft technology, this second skin will evenly distribute body heat.

Technical product structure

The I-Soft technology enhances the fabric’s performance, providing a variety of benefits: soft, feeling of warmth, comfort on the skin. It also increases product performance with better thermoregulation, moisture wicking, and thermal insulation. To achieve this softness, the base layer is brushed.

What is I-Soft technology?

The innovative I-Band technology at the waist means the fabric stays in place and does not ride up. Also, the top and bottom of our I-Soft tops are equipped with this technology so you can focus on your sport.

What is I-Band technology?

You only need three technical layers to stay warm on the slopes: Layer 1 or a base layer, to stay dry. - Layer 2, an insulating layer to keep the heat in. Layer 3 or a protective layer, to protect against bad weather.

We commit to repairing your product free of charge for the duration of the warranty. This service is offered in stores, including for snags, seams, zippers, and more.
However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable

The model is 1.85 m (6’1") tall and is wearing a size M.  
Measurements: 
Chest measurement: 104 cm (41 in)
Waist: 104 cm (41 in)
Arm length: 45 cm (17.7 in)
Inseam: 80 cm (31.5 in)

Ski Base Layers

Good: bodymapping for perspiration wicking and quick drying.

Average: bodymapping integrated into a brushed component (165 g/m2).

Designed for moderate-intensity skiers looking for a comfortable, extremely soft, cold-weather base layer that fits like a breathable second skin.

belt height

Reversible

The BL 580 Ski Base Layer Bottoms come in a slim fit. They stop at the knee to avoid overlapping layers (socks and base layer) and folds in your ski boot, which may affect comfort. 
They are like a second skin that hugs the body, reducing chafing and improving moisture wicking.

How do the BL 580 Ski Base Layer Bottoms fit?

Polyamide is the strongest of all raw textile materials, even when wet, and it is very stretchy.
This breathable fibre manages moisture very well and provides good temperature regulation.
These specially textured, super-soft yarns give the fabric a silky, natural feel. Ideal for tight, seamless clothing.

What are the benefits of polyamide?

The I-Soft technology enhances the fabric’s performance, providing a variety of benefits: softness, warmth, and comfort. It also enhances garment performance, providing better heat regulation, humidity absorption, and thermal insulation. To achieve this softness, the base layer is brushed.

The I-Band technology is an innovative design used around the waist of the I-Soft top and bottom base layers. It helps keep the garment in place so that it doesn’t ride up or fall down when skiing.

The model in the photo is wearing a size L and measures 185 cm (6’1”).
 
Measurements: 
Chest measurement: 104 cm (41”)
Waist: 104 cm (41”)
Arm length: 45 cm (17.8”)
Inseam: 80 cm (31.5”)

Ski Leggings & Tights

clearance

Waterproof membrane and water-repellent outer fabric.

Adjustable

Wide cuff that can be placed above or below the jacket sleeve.

Ease of use

Dexterity

These gloves were designed for occasional skiers who want to stay warm in winter. They will keep your hands warm so you can enjoy the ski slopes.

Glove Type

abrasion 

reinforced area

reflective

To Bring Warmth

anti-slip

leash

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h (12 mph), the temperature will feel like -10°C.Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Anti-loss system

It reflects how easily you can handle objects while wearing the glove. All our gloves are field-tested and given a dexterity score on a scale of 1 to 5. Gloves with a dexterity score of 5 allow you to handle objects just as you would with bare hands. 
The dexterity score is based on how well we could remove and put on ski goggles, adjust the hooks on a ski boot, and open and close a jacket.

What is a glove/mitten’s dexterity?

Ski Gloves & Mittens

5 target zones: 4 corners and centre of goal.

Precision

Fits onto the goal with velcro fasteners.

Easy assembly/dismantling

This target practice cover was developed to help you improve your shooting accuracy and to practise on your own or with others. 

Practice Conditions

target type

Volume

Foldable

Attachment Type

Playing Surface

Product dimensions and weight

Dimensions = 40 x 18 x 10 cm
Weight = 820 g

Packaging dimensions and weight

This Kipsta target practice cover's size and attachments fit Kipsta Size L Classic and Basic Goals in size L, as well as on handball and public pitch goal posts.

Modular

Soccer Nets & Goals

Comfort temperature when at rest:-2.5°C 
Limit temperature when active:-11°C

Waterproof lower part and main upper with water-repellent membrane

Snow Contact sole with good grip, comfortable and approved for snowy ground

Grip

3D analysis tests the ability of 4 mm crampons to anchor into soft ground

Traction

Quick to put on with the wide opening and rear strap

Easy dressing

These warm boots are designed for occasional hikes on shallow or compacted snowy surfaces. 

Removable Sole

comfort temperature

Outsole Technology

Boots Type

Foot Width

Boot Height

Fastener Type

We opted for a warm lining that’s been tested in our laboratories and in the field with adventurers just like you! For static comfort at -2.5°C, and dynamic comfort at -11°C, and yes, we’ve considered the differences between men and women, for guaranteed fun in the snow!

Are they warm enough for winter?

Your boots provide great protection from snow. They have a waterproof mid-height outer sole to keep your feet dry and a warm, water-repellent fabric upper to keep snow from getting in your boots. Off to the next winter adventure!

How do they protect?

For traction, the lugs of these boots are like claws that grip the ground when climbing. 
For grip, grooves under the soles act like the tires of a car and keep you stable on slippery terrain. 
These boots will make light work of winter terrain. 

Traction or grip? What’s the difference?

Thanks to the fabric used and the design of the lugs, SnowContact soles ensure good grip on sloping terrain and traction on snow. The 3.5 mm lugs are specifically positioned and designed to grip the snow, drain off water, and keep you from slipping.

What does the SnowContact technology provide?

Our engineers carry out tests to check that our products go the distance! They test: resistance of the straps with checks of the gluing, UV resistance, abrasion and aging. Nothing escapes their attention to ensure your complete satisfaction

What resistance do they provide over time?

Tips for braving the winter: 
- Wool socks for maximum warmth 
- Breathable socks to keep your feet dry 
- Socks suitable for the height of the upper

What should you wear for a hike in the snow?

The water-repellent fabric repels water on the surface without absorbing it, keeping this pair of boots light, breathable, and warm. The water-repellent treatment must be periodically reapplied to ensure it stays effective over the product’s lifetime. Apply on the fabric as a spray or liquid.

How to maintain the waterproofing

To effectively dry the inside of your damp boots, remove the insole, use newspaper to absorb moisture, and change it regularly. Avoid direct heat sources that might damage the material and dry them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Men's Hiking Shoes

The knit fabric provides freedom of movement.

Freedom of movement

Softness

This T-shirt is the perfect basic. It’s a simple and easy wardrobe essential.

Ironing at a maximum soleplate temperature of 110°C. Steam treatment may cause irreversible damage.

A basic T-shirt is more complicated than it might look. Because we want to create sports clothing that is comfortable and stylish, we have quite a few things to keep in mind. We want our basics to be made from durable fabrics, with comfortable cuts, and at the best possible price. If you wear this T-shirt at the gym and at work, that means we achieved what we set out to do!

Designing good basics is a real challenge!

The fabric weight is given in grams per square metre and indicates how thick the fabric is. Fabric thickness will affect transparency, drape, and lifespan: the heavier the fabric, the more opaque your top will be, the nicer the drape, and the longer it will last.

What a T-shirt’s weight tells you

Men's Workout T-Shirts

Wadding filling: 200 g/m² (body), 150 g/m² (arms). Comfort: -10°C, limit: -30°C.

Waterproof membrane 15,000 mm water (Schmerber). Fully taped seams.

Adjustable hood. Elastic inner waistband. Wrist cuffs.

Central zipper pull with a double slider means you can bend or sit down.

Easy opening/closing

3 secure flap and zippered pockets and 1 mesh pocket.

Warm and waterproof with a slim cut, this parka is ideal for your hikes and everyday outings. 

quechua

Men’s Waterproof Hiking Boots with Side Zipper, NH 100