onlyonline

Ease of use

Robustness

We designed these 2 brushes for deep cleaning your bike.

Application Type

Volume (ml)

Condition

Intensity

Use the large brush in the most difficult-to-reach areas of your frame to avoid scratching, especially if you have a matte paint finish.
We recommend testing the large brush on a small area before using it on the rest of the frame.

Advice from our team

Bike Tools

Shelf for your tools and 360° rotating clamp.

Can be folded (central tube). 
Dimensions when folded: 120 x 12 x 9 cm.

Compact design

Adjust the stand height for comfortable use, from 1.10 m to 1.52 m.

Adjustable

Stable enough to hold bikes weighing up to 25 kg/55 lb thanks to the three legs.

Stability

This bike repair stand was designed to allow you to take care of your bike indoors or outdoors on a stable stand.

Maximum Bike Weight

Maximum Load

Attachment

Number of Bicycles

Main Material

For greater comfort during maintenance, clamp the bike so that the rear wheel is higher than the front wheel. This will keep the handlebars level.

Our advice for positioning your bike

You can use this repair stand with bikes weighing up to 25 kg/55 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

During assembly, remember to position one of the three feet in line with the arm to ensure the best possible stability.

Assembling your repair stand

Packaging dimensions:  108.5 x 20 x 12 cm (42,7″ x 7,9″ x 4,7″)

Stand height adjustment: 1.10 m to 1.52 m (43,3″ à 59,8″)

Features

75 dB. Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

Compatibility

Easy assembly/dismantling

This bell ensures your safety when riding in a less noisy environment.

Frequency

Assemble With Tools But Without Tools Provided

Assembly Type

Position

Bike's Bells

For Shimano SPD-SL road-compatible shoes and cleats. 

Grip

Versatility

Two-part cleats so you can change them while maintaining your settings. 

Capacity

Our design teams have developed these Shimano SPD-SL-compatible cleats with 6° angular float. 

Skill Level

Playing Surface

Toe Clip Type

Bike Pedals & Cleats

For shoes with 3-hole inserts in a triangle and Keo cleats.

A clipless pedal with an excellent pedalling surface and optimal foot support for effective pedalling. 

Pedal Type

Inside the box: 
- 2 cleats compatible with Look Keo 4.5°
- 6 screws and 6 washers

Included in the box

Coating applied to enhance the tool's corrosion resistance.

Corrosion resistance

The pedal wrench is designed specifically for installing or removing pedals.

Length: 236 mm (9.3 in)
Height: 48 mm (1.9 in)
Thickness: 13 mm (0.5 in)
Weight: 143 g (5.0 oz)

Features:

The pedal wrench is for installing or removing pedals.The handle is longer than on our previous model, giving you extra leverage for easier adjustments.

What is this tool for?

Pedals are specific to each side: one for the right side and one for the left side, and it's important to check the direction for fastening them before installation.

Did you know?

It's recommended to oil up your pedals to make them easier to remove in future. (Reference 8874174)

Maintenance advice: 

Save time on maintenance with its fast absorption.

Absorption

This pack of microfibre cloths makes it easier to clean and dry your bike.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 40°C. Normal cycle.

Minimum Lifespan

To ensure optimal maintenance, we recommend that you follow these 3 steps: 1) Degrease your drive train
2) Clean your bike
3) Lubricate your chain

Clean and dry your bike with these microfibre clothes.

How to look after your bike

We recommend using a cloth specifically for the drive train (the 'dirtiest' part) and one just for cleaning or drying the rest of your bike.

Tip from the pros:

Sold in packs of 2

Dimensions:30 cm x 30 cm 

Cloth weight:30 g (1 oz.)

Features: 

We recommend using this microfibre cloth with a waterless cleaning foam to clean your bike.It effectively removes dirt while protecting your frame from scratches.

What you should know 

Rockrider

For a 1 1/8” (28.6 mm) steerer tube and oversized handlebars (31.8 mm).

Designed to improve your comfort when cycling.

Practice Conditions

Stem Type

Length (mm)

Suitable for 1" 1/8 (28.6 mm) fork steerer tube and 1" 1/4 (31.8 mm) oversize handlebar.Stem tilt 7 °
Torque the fork steerer tube to 5-6 Nm and the handlebar to 5-6 Nm.
6061 aluminum body, steel screws.

Technical information

Bike Stem, Posts & Clamps

The 3 products are suitable for every kind of bike, mechanical, or electric.

Get your drive train and your bike in perfect shape.

Visual efficiency

With its compact size, you can take the kit everywhere with you.

This bike cleaning kit follows just 3 steps: degrease, clean and lubricate. Care for your electric, road, city, mountain, hybrid bike and more.

Maintaining your bike will let you:
- Extend the life of the various components 
- Ensure that it works properly
- Reduce unwanted noise
- Prevent breakages
- Enjoy the pleasure of riding a clean bike

Why should you maintain your bike?

To ensure full maintenance, we recommend that you follow these 3 steps: 
01. degrease your drive train
02. clean your bike
03. lubricate your chain

This kit contains the 3 products needed to carry out the 3 steps required to properly maintain your bike. You will be able to carry out at least 3 full services on your bike.
Products included in the kit: 
01. Plant-based degreaser (100 ml)
02. Concentrated bike cleaner (100 ml)
03. All-weather chain lubricant (50 ml)

Kit contents

This degreaser lets you effectively degrease your drive train. You can apply it using a brush or our chain cleaner. 
Application with a brush: pour about 25 ml into a pot and apply generously to your chain, cassette, derailleurs and derailleur pulleys. Leave for a few moments then move on to step 2.
Application with the chain cleaner: pour on about 9 ml, turn the pedals a few times before moving on to step 2.

How to use the drive train degreaser

Pour about 30 ml of concentrate into a bucket of water then apply generously with a sponge to the whole bike. 
The product will not damage the paint or any other components of the bike.
Rinse with clean water then dry your bike. Pay particular attention to drying, especially your drive train, to ensure total efficiency later on. Now you can move on to step 3.

How to use the concentrated bike cleaner

Remove the cap, position the applicator on the lower part of the chain (inner side) and make a full turn (in the opposite direction to pedalling). 
To make sure you don’t apply too much, use your quick-release as a guide.  
Remove the excess lubricant with a cloth placed under the chain, then do 2 or 3 complete turns of the pedal (in the opposite direction).
The lubricant will protect your chain in all riding conditions.

How to use your chain lubricant

01. degrease your drive train if you’re applying the product with a brush, be careful not to project the dirt towards you.
02. concentrated bike cleaner: in winter, use warm water to make this step easier and use cold water in the summer.
03. chain lubricant: apply on the inside of the chain, position the applicator on the lower part of the chain.

Good to know

Remember to degrease your chain before applying new grease in order to remove any residue that could make abrasive contact with your drive train. This will help your equipment last longer and save you money.

Maintenance advice

Made in

List of ingredients:
Mix of saturated and unsaturated fatty acid methyl ester PEG-30 glyceryl cocoate 
Each ingredient is given with its INCI name (International Nomenclature of Cosmetic Ingredients)

Drive train degreaser composition

Concentrated cleaner composition

Synthetic oil with additives and anti-wear properties, corrosion protection and wash resistance.

Chain lubricant composition

Effective at a fast pace: 400 lumens and wide beam.

15 lumens at the rear with stop brake function.

Visibility

Between 2 and 8 hours of battery life depending on the selected mode.

Autonomy

3 modes: power, eco and auto.
Quarter-turn 'Garmin' style mounting.

IPX4: Withstands splashes and heavy rain.

Waterproof

This bike light set is designed to help you see ahead at high speeds and be seen from 360°.Its brightness increases during deceleration.

Reclining

Power Capacity

Brightness (Lumens)

Weight (g)

reflective

Rechargeable

Lighting Type

Type Light

Type of Battery

type of rear visibility

Autonomy (H)

Hook Type

Power Type

Range (m)

Type of Beam

Choose from the 3 modes! 

Rear stop light.
At the front: 
Power mode: 400 lumens, for 2 hours
ENERGY SAVING mode: 150 lumens for 5 hours 30
AUTO mode: automatic switch from power mode to economy mode, or vice versa, depending on external light conditions to save battery.At the rear: 
15 lumens for 8 hours.
Brake light function thanks to a deceleration sensor.

Choice of power and battery life

Whether you use them for daily commutes or for athletic road bike rides, these powerful lights give you visibility and are visible at a fast pace. Their wide front beam lights up the road and the verge or kerb to give you advance warning of any obstacles.

Lights for both city and country

These lights are so powerful that you can even use them during the day. We often forget that 75% of accidents occur during the day. With these lights, you can ride safely both day and night!

Lights for both day and night

These lights are equipped with 2500 mAh lithium batteries at the front and 730 mAh at the rear. We advise you not to leave them flat for more than a month.It's important to charge your lights even when you're not using them.In cold temperatures, the battery life will be shorter.

How to get the most out of your lights' batteries

It takes 3 hours to fully charge your 2 lights and be ready to hit the road safely.

Light kit charging time

If you encounter a fault with the mounts, you can get replacement parts from our after-sales service in stores or on our website.

Replacement mounts

Lights

clearance

Vents and internal channels ensure continuous airflow.

Ventilation

This light, In-Mould helmet is less compact than the 900 model.

Lightweight

Subject to the same ventilation testing as the Aerofit 900 helmet

Aerodynamics

Anatomic design

This variation on our Aerofit 500 helmet was designed with a brand-new adjustment system for added comfort.

Adjustable Helmet

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

removable foams

number of aeration points

Bluetooth Connection

Style

Certification

Detachable Visor

Fastener Type

Size M: 55–58 cm (21 1/2 - 23")
Size L: 59–61 cm (23 - 24")

The Mips system means you lose 1 cm (2/5”) of head space compared to a classic RoadR 500 helmet.

Sizes

The Mips system consists of a layer with a low coefficient of friction, which allows for 10-15 mm (2/5 - 3/5”) of multidirectional movement during certain angled impacts.
This movement reduces the rotational force transmitted to the head.

For more information, visit mipsprotection.com.

Mips

Size M: 330 g (12 oz.)
Size L: 360 g (13 oz.)

Weight 

With in-mould technology, the external polycarbonate shell is moulded while expandable polystyrene (EPS) is injected. The resulting structure is harder, sturdier and extremely light. The inner EPS structure absorbs the energy of impact while the hard outer shell ensures durability.

In-mould technology and EPS

Make sure the helmet fits properly.

If not entirely satisfied, please return or exchange, according to our return policy, along with the instructions, labels and any original packaging 

Return policy for cycling protective gear.

Complies with standard EN 1078 for bikes, inline skates, and skateboards.EN 1078 is a European standard for testing methods and requirements for cycling, skateboarding, and skating helmets.
This standard covers the following aspects: construction (including field of vision), shock absorption properties, retention system features (including the chinstrap and tightening devices) and marking and information.

What does the EN 1078 standard cover?

Helmets

Suitable for all types of wheel (except fat bikes).

Wide zippered opening.
Storage pocket for your QR skewer

The foam on the inside provides great protection

Impact protection

Need to protect your bike wheel? This bag lets you carry and protect your wheel when travelling or at home.

Sports/

Cycling/

Bike Tools and Components/

Bike Tools/

decathlon

Bike Toolkit, Ultim