Upper filling: 328 g/m² wadding and 5 mm foam. 140 g/m² brushed lining.

Warmth

Waterproof up to the top of the single-piece foot.

Waterproof

Wide opening, hook-and-loop tab adjustment, and straps for grip.

Easy dressing

Flexible, lightweight material: One boot in size 5C/6C weighs 159 g (5.6 oz).

Lightweight

Adjustable hook and loop tabs on the top of the boots.

Traction

Inner label for writing your child’s name.

Customization

These après-ski or snow boots are designed to keep your child’s feet warm and dry when out in the snow and sledding. 

Condition

Frequency

Removable Sole

Season

shoes with left or right mark

Weather Conditions

Boot Height

Main Material

Fastener Type

We selected an insulating lining and filling to keep your kids' feet nice and warm like fur-lined boots.
These warm boots have been tested in an external laboratory according to a thermal resistance protocol compared to other Decathlon baby boots.

How can I be sure that my child’s feet will stay warm?

The boot’s vamp (low, thermoplastic part) is snowproof. To make the entire boot waterproof, pull the bottom of the snowsuit or ski pants over the top of the boot. A hook under the sole helps you to position the elastic gaiter on the pants or snowsuit to provide a good seal and keep the snow out.

How can I be sure that my child’s feet will stay dry in the snow?

These boots were designed to fit a child wearing thick ski socks without compressing the foot and therefore encouraging thermal protection.
To make sure you choose the right size, use Decathlon’s foot sizing guide.

How to choose the right size

These winter boots have been specially designed so that they are extremely easy to put on your child. 
The uppers in sizes 3C/3.5C and 4.5C/5C are open on both sides and can be fully turned back to provide a wide opening for your child’s foot. 
Sizes 6C/7C and 7.5C/8.5C are open on one side. A strap on top of the upper lets your little one try and put the boot on all on their own.

Why do these boots have large openings and straps on top?

Traction depends on the number and size of lugs (3 mm on this boot). The grip depends on the sole materials and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boots.
Grip prevents the boots from slipping and skidding on smooth ground or in difficult conditions (rain, snow, ice).

What is the difference between traction and grip?

Space on the lining to write your child’s name and personalize the boot. Helps you quickly find the boots at daycare!

Where can I write my child’s name on these boots?

Toddler & Kids Hiking Shoes

100% merino wool: regulates body temperature.

Cuffs that can be folded or unfolded for 2 years of use.

Adjustable

Merino wool doesn’t itch because it is finer than conventional sheep’s wool.

Softness

3 snaps at the shoulder open up the collar so that the head fits through.

Natural stretch for better comfort and freedom of movement.

Freedom of movement

The merino wool captures moisture and transfers it outwards.

Moisture management

Perfect for winter adventures, this base layer is made of naturally antimicrobial merino wool that regulates body temperature. 

Maximum wash temperature of 30°C. Very delicate cycle.

Intensity

Collar Type

adjustable height

sleeve length

Adjustable Length

Grammage

anti-uv

Pocket

Type of Layer

Style

To stay warm and dry, we recommend the 3-layer technique: 
- Layer 1 or base layer, to stay dry. 
- Layer 2 or an insulating or thermal layer, for additional warmth. 
Layer 3: to protect against the elements.

How to dress your kids so they stay warm in the snow.

Merino wool is the best material you can choose for your child’s winter base layer. Wool’s natural properties provide excellent thermal regulation. Merino wool is light, soft, doesn’t itch, and effectively eliminates moisture.

Why choose merino wool?

Our yarn development team met with breeders in South Africa to ensure that the wool is obtained without breaching animal welfare regulations. Unlike some countries that export merino wool, South Africa prohibits mulesing. Mulesing is a painful surgical procedure for sheep to prevent parasites from developing on the animal. Our teams formed partnerships with breeders to ensure the long-term viability of the sector in line with your ethical and technical expectations.

What is the origin and traceability of our merino wool?

The Meriwarm Base Layer Top has a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. The lower back stays covered with the longline cut. The high collar protects the neck.

What is the cut of the Meriwarm Base Layer Top?

Kids' & Babies' Winter Clothing

clearance

Fleece component for warmth. Elastic waistband.

Cuff that can be folded or unfolded for 2 years of use.

Knit with extremely soft thread for extra comfort and softness.

Slightly breathable base layer. Low perspiration wicking.

These base layer tights were designed to keep your toddler comfortable and warm when out enjoying the snow. Breathable fabric and moisture-wicking.

reinforced area

Number of Pockets

belt height

Reversible

Type of Length

Type of Bell

To stay warm and dry, we recommend the 3-layer technique: 
Layer 1 or a thermal base layer, to stay dry. 
Layer 2 or an insulating layer, to keep the heat in.

Layer 3: to protect against the elements.

The durable, high-quality component has been tested in a lab and in the field to provide warmth and remain lightweight. The brushed knit provides the volume needed to create a layer of air that keeps your child warm.

What are the benefits of polyester?

These Base Layer Leggings have a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. The elastic waistband provides good support.

What is the cut of the Base Layer Top?

245 g/sqm synthetic fur on the back, 200 g/sqm fleece and high collar.

Opens up to the knees on the front for easy dressing.

Foldable inserts at the end of sleeves and legs allow for 2 years of use

Synthetic fur and fleece components provide flexibility and softness.

Worn over a thermal base layer, this fleece ski suit with fur insert provides warmth, softness and comfort for your baby.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Hood

Zipper Type

To stay warm and dry, we recommend the 3-layer technique: 
Layer 1: a base layer, to stay dry. 
Layer 2: an insulating layer (such as this fleece snowsuit), to keep in the heat. 
Layer 3: to protect against the elements.

Brushed component for extra warmth. Raised collar with snaps. Longline cut.

3 snaps at the shoulder open the collar to get your child’s head through.

This base layer (or first layer) is designed to make your baby feel comfortable during their outings in the snow.

top length

The Base Layer Top has a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. The high collar protects the neck.

Wool is the best material you can choose to keep your child warm in the winter. Wool’s natural properties provide excellent thermal regulation. Merino wool is light, soft, doesn’t itch, and doesn’t retain moisture.

The Meriwarm technical base layer bottoms have a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. They provide good support with the elastic waistband.

150 g/m² wadding. 140 g/m² fleece lining, 220 g/m² fake fur in the back.

Waterproof coating = 5,000 mm (Schmerbers) | Non-taped seams 

Opens fully at the front. Pull the gaiter over the snow boots.

System to attach Decathlon Lugiklip baby mittens. Mittens not included.

Compatibility

High collar covers back of neck. Can turn into a hood for excellent coverage.

Flexibility

Label inside for writing your child’s name.

Ideal for your child’s first sled rides. It will keep them warm and no snow will get inside.

Ventilation Zippers

Type of Brushing Boots

Windproof

type of waterproofing

type of hood

Schmerber

The wadding keeps your child warm. The polyester-based synthetic material traps air. The thicker the wadding, the more air it contains and the warmer it is. The kids’ snowsuit has 150 g/m² wadding.

Will my child stay dry when playing in the snow?

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 Standard). The higher the pressure, the more waterproof the fabric. Waterproof material with a rating of 2,000 mm withstands the pressure exerted by a 2,000 mm column of water. It’s a quality guarantee.

How can I be sure that my child will stay dry when playing in the snow?

Use the Lugiklip system to attach Wedze mittens onto the sleeves of their Wedze snowsuit and coat.
The fun design of Lugiklip accessories encourages your child to attach the mittens to their sleeves all on their own! The colours combine to create animal characters.
The mittens will always be ready to put on!

Mittens not included with the snowsuit.

How do I ensure my child’s mittens won’t get lost and will keep their hands warm and dry?

Pull the elastic at the bottom of the snowsuit under the boot to keep out snow and cold air.

How can I keep snow out of my child’s snowsuit?

A water-repellent fabric doesn’t absorb liquid: the fabric does not soak up water and stays light and breathable. You can see water bead and run off the fabric’s surface. A fabric is made water-repellent by applying a treatment to its outer surface. This treatment needs to be reapplied throughout the product’s lifetime (every 3 washes). 

What is water repellency?

To reactivate its water repellency, wash the garment inside out on a synthetic cycle at 30°C and rinse thoroughly. Use your usual laundry detergent but not fabric softener. Then let the snowsuit air dry completely on a drying rack. Finally, turn the garment right side out and tumble dry on low heat for 10 minutes. The heat reactivates the fabric’s water-repellent treatment.

Restoring water repellency

Write your child’s name on the label inside. Helps you quickly find the snowsuit at daycare.

Where can I write my child’s name on this snowsuit?

Special hook-and-loop tab chest pocket for storing their pacifier.

Where can I store my child’s pacifier on this snowsuit?

The waterproofing of a fabric is measured in Schmerbers or mm of water (pressure of a water column). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water (Schmerbers) before washing (equivalent to the pressure exerted by a 5-metre column of water).

How is the waterproof rating of the kids’ snowsuit verified?

150 g/m² insulation. Brushed synthetic lining 90 g/m².

2,000 mm rated coated fabric. Waterproof protective flap on the zipper.

Wide opening, inner thumb lining and elastic with coloured loop.

System for attaching mittens to a Decathlon lugiklip ski suit or jacket.

Stability

These warm, waterproof and clever mittens with long cuffs and wide zipped openings are very easy to put on.

Skill Level

Reinforced Palm

leash

Tightening Type

Wadding keeps hands warm. This polyester-based synthetic material traps air according to its thickness. The thicker the wadding, the more air it contains and the warmer it is. These mittens have 150 g/m² wadding.

Use the Lugiklip system to attach Wedze mittens onto the sleeves of their Wedze snowsuit and coat.
The fun design of Lugiklip accessories encourages your child to attach the mittens to their sleeves all on their own! The colours combine to create animal characters.
The mittens will always be ready to put on!


If you have don't have a jacket or a ski suit, no worries! We have attached an elastic cord to the inside of the mittens to keep them on the child's hand.

How do I keep my baby from losing their mittens if I don't have the Decathlon baby ski suit or the jacket?

Pants lined with a 180 g/m² fleece component for warmth.

Water runs off the component for protection from a short, light shower.

Water repellent

Elastic waist and adjustable belt keep the pants in place.

Windproof fabric keeps air out to reduce heat loss.

Robustness

These pants are designed for children who hike occasionally in cold weather. 

Sportsperson’s Height

Place of Practice

modular

The fleece component is designed to trap air in the space formed by its texture. This air acts as a natural insulator, keeping the body warm. It is the brushing of the knit fabric that traps the air.

Fleece material: Insulation thanks to air

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment's lifespan (recommended after each wash). Products are available for this purpose in our stores. 

Component water resistance

Care products: spray or liquid water-repellent treatment in the washing machine. We recommend using these products every wash to renew the fabric’s water-repellent properties and optimize the garment’s performance throughout its lifetime.

How do I preserve the technical components of my pants?

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

Choosing the right clothing for hiking in the snow

Hiking Pants

245 g/m² synthetic fur on the front and back, 140 g/m² fleece and high collar.

Full opening at the front makes it easy to put on.

Stretch component for more comfort and freedom of movement.

This fleece jacket (or second layer) complements your baby's outfit during sledging outings and provides additional warmth. 

Components thoroughly tested in laboratories and in the field to guarantee warm, lightweight products. The 245 g/m² synthetic fur and 140 g/m² fleece creates a layer of air to keep your child warm.

To stay warm and dry, we recommend the 3-layer technique: 
Layer 1 or a thermal base layer, to stay dry. 
Layer 2 or an insulating layer (such as this fleece jacket) to keep in the heat. 
Layer 3: to protect against the elements.

How to dress your kids so they stay warm in the snow

Double-sided microfleece. A density of 200 g/m² ensures optimal comfort.

Polyester knit: Allows perspiration to escape (RET = 6.3).

Breathability

Durable component specially chosen for young adventurers! Two-year warranty.

Durability

Full zipper makes it easy to put on and take off.

Weighs 143 g (5 oz) in size 3-4 years.
Compresses to fit easily in your bag.

Machine washable at 30°C, quick drying. Crease-free, no ironing needed.

Ease of Maintenance 

This breathable fleece jacket was designed to keep your kids warm and comfortable during their outdoor activities.

The fleece component traps air thanks to the way its texture creates volume (and the way the fabric is brushed).↲The air acts as an insulator, keeping the body warm.

Fleece material: Insulation provided by air

Children sweat easily. To ensure that our fleece jacket is comfortable in any situation, we chose a breathable fabric. It effectively wicks away body moisture, keeping young adventurers dry on all their adventures.

Why make a breathable fleece?

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET index of 6.3.

What is the RET index?

This fleece jacket is available from age 2 to 6 years old.

What sizes are available?

A machine wash at 30°C is perfect for preserving all the properties of fleece. We also recommend turning it inside out and closing the zipper before washing. Don’t exceed 1,000 rpm for the spin cycle. Do not tumble dry to avoid damaging it.

How to clean the fleece

Reversible—wearing on either side because there is no wrong way!

Ease of use

This kids’ reversible balaclava is designed so that your child can enjoy the winter while keeping their head and neck nice and warm.

wedze

Babies' Ski Tights, Age 15 months–3 years