Holds your joints in place (metacarpals and wrists).

Joint support

This wrap's good absorption abilities protect gloves from perspiration.

Moisture absorption

For supporting joints of hands and wrists and absorbing perspiration during boxing training sessions and competitions. 

Maximum washing temperature 30°C. Normal cycle.

Intensity

Length

Support Type

Protection Area

Tightening Type

Main Material

When wrapping your hands with wraps, the last thing you want is to have to start over because you put it on wrong at the start. To make this task easier, we designed a boxing wrap that has an ergonomically-designed loop. 
With its curved shape, it hugs your thumb. This ensures that you put it on correctly every time (along the thumb and across the back of the hand), and on the right side (relative to the rip-tab at the other end).

Ergonomic loop

To ensure comfort, good protection and support, our 4 m wrap is made of cotton and polyamide.
– Cotton absorbs perspiration and protects the hand. 
– Elastane is highly flexible, allowing you to easily slip the wrap between your fingers without limiting your agility. 

Design

Boxing hand wraps are designed to hold joints in place (metacarpals and wrists) as well as prevent irritation in areas that suffer repeated blows.
They also absorb perspiration from hands and extend the gloves’ life.

Why use boxing wraps? 

For low-impact use such as for touch sparring, the 2.5 m or 3 m wraps are more than sufficient; make sure the wrap covers the key zones (thumb, metacarpus, and wrist).
For more intense use, such as sparring at full force, opt for the 4 m or 4.5 m wraps. They are thicker and provide stronger support and better protection of the metacarpals.

Choosing the right length

Boxing Gloves & Wraps

Latex foam block at the base of the fingers.

Cushioning

Large opening at the palm + sweat-absorbent inner coating.

Moisture management

Wide 1.5 m strap for locking the wrist joint.

Fast to put on thanks to its "fingerless" design.

Easy dressing

With the Liner Gloves 500, combine cushioning, support, and easy dressing.
The perfect liner for wearing under your boxing gloves while training.

Condition

Skill Level

Professional boxers use specialized bandages for their fights - it was by observing these bandages that we designed the Liner Glove 500 Ergo
Its ergonomic shape perfectly hugs the natural shape of the hand, providing an exceptional feeling of comfort.
The foam reinforcement around the base of the fingers ensures optimal cushioning on each strike, and the large opening at the palm guarantees optimal hand flexibility when striking

A liner glove inspired by professional bandages.

Our Liner Glove 500 Ergo is perfect for increasing cushioning and comfort, but it is important to note that the Liner Glove 500 is bulkier than a standard boxing strap or mitt.
So we recommend wearing a glove that is one size larger than usual.

Tip regarding boxing glove sizing.

clearance

Extended foam around the wrist for ideal support. 

Exterior polyurethane coating for optimal durability.

Abrasion resistance

Mesh glove lining for maximum ventilation.

Ventilation

Designed for boxers looking for comfortable gloves for low-intensity training while sparring or with the punching bag.

Foam Type

foam density 

Thanks to the ergonomic foam, these gloves perfectly hug the shape of your hands and follow their natural curves. The foam is always in contact with your knuckles when you punch, ensuring an excellent level of comfort and cushioning during your training sessions.

An ergonomic glove that makes all the difference.

Every glove has a specific shape so that, depending on your preferences and the shape of your hand, you will feel more or less comfortable.
Every glove has its own advantages, so to pick the right one for you, it's important to make your choice based on your training intensity (low, medium or high).
Feel free to try our different models in-store.

A few tips for choosing the right boxing gloves.

You would never wear shoes without socks, right? It's exactly the same thing for boxing gloves! 
Whether you want to limit rubbing or enjoy better support and moisture management, these wraps and inner gloves are essential and should be worn during every training session.
Check out our models available online or in-store.

Wraps and inner gloves: what are they for?

Body Protection

Impact protection

Ergonomic shape for a comfortable, stable grip. 

Ergonomic grip

Thick, abrasion-resistant polyurethane exterior. 

Punch mitts for honing speed and precision with a training partner.
Sold in pairs.

Filling

Width

Length (cm)

Working with punch mitts is ideal for improving your boxing technique. It’s more engaging than training with a punching bag, as having a partner gives you moving targets and more closely resembles real sparring.
The aim is to learn various combinations so you can develop speed and precision while improving your technique.
With infinite possible combos, this type of training provides a dynamic workout.

Directions for use

These punch mitts are designed for working on speed (lightweight) and precision (centre of each target is marked) while being safe and comfortable for the wearer.
They were tested and validated with a panel of users, and lab tests guarantee their compliance with European standards for personal protection equipment.

Boxing Pads

Mono-density foam that provides good cushioning while striking.

Micro-ventilated mesh fabric to ventilate the palm of the hand.

Looking for beginner's boxing gloves for kids that are easy to get on/off? Look no further! They can get them on unaided.

Kids' boxing gloves need to be designed specifically for smaller hands. These gloves were tested and approved in the laboratory, then in use by around 20 young boxers.

Gloves specifically designed for kids

These gloves will fit your child's hands perfectly thanks to their ergonomic foam that conforms to the curves of their hands. This ensures the foam is always in contact with their fingers for optimal cushioning against impacts.

Kids' gloves with ergonomic protection

The wrist lock keeps kids safe while boxing. We extended the gloves' foam to the wrist so that the cuff covers part of the forearm. Thanks to this stiff cuff, even young children can get these gloves on.

Kids' gloves with wrist support

We intentionally designed these gloves to be easy to get on/off so that your kids can feel independent while training.Your child can quickly and easily get their gloves on unaided!With the help of young boxers, we compared these gloves to similar ones on the market so we can guarantee that they are the easiest gloves to get on/off.

Putting these gloves on is child's play

8 mm thick. Density: 70 kg/m3.Perfect for stabilizing your equipment.

Sold in packs of 4. Customizable shape and dimensions. Snap-together floor pads.

Versatility

Removable border to ensure a straight edge.

Visual efficiency

Our design team has created these floor pads for reducing the noise of your cardio equipment and protecting your floor.

Belt Thickness

Weight (kg)

Place of Practice

COMPOSITION

Length: 54 cm
Width: 54 cm
Thickness: 8 mm
Weight: 0.8 kg

WEIGHT AND DIMENSIONS

The DF 920 floor pads comply with formamide regulations

COMPLIES WITH APPLICABLE REGULATIONS

Treadmills

Standard 28 mm (1”) diameter cast-iron. 2-year warranty.

Robustness

Raised edges make these plates easier to handle.

Set: 0.5kg, 1kg, 2kg, 5kg, 10kg, 20kg (1.1lb, 2.2lb, 4.4lb, 11lb, 22lb, 44lb)

Weight

Work with heavy loads using this 20 kg (44 lb) cast-iron weight. It is sold individually and is compatible with all 28 mm (1”) bars and dumbbells.

Type of Disc

Bore Diametre (mm)

With Handle

Packaging

Weight: 20 kg (44 lb)
- Thickness: 37 mm (1.5”)
 Internal diameter: 28 mm (1”)
 - External diameter: 360 mm (14.2")

Dimensions of the 20 kg (44 lb) cast-iron weight

This 20 kg (44 lb) cast-iron weight is compatible with all 28 mm (1”) bars, including: 
- 1.2 m (47”) straight bar (ref: 8289897)
- 1.2 m (47”) curl bar (ref: 8484124)
- 86 cm (34”) triceps bar (ref: 8484125)
- 35 cm (13.8”) short bar (ref: 1041986)
- 45 cm (17.7”) threaded bar (ref: - 1.55 m (47”) straight bar (ref: 8289896)
- 2 m (6.5’) straight bar (ref: 8289900) 
However, it cannot be used with a 50 mm (2”) bar.

What bars can you use with this 20 kg (44 lb) weight training disc?

Invest in a pair of disc collars to prevent your weights from slipping on the bar as you work out. Ours are sold as a pair (ref: 8574652).
The maximum weight supported by the disc collars in a vertical position is 15 kg (33 lb).

With disc collars, you can train safely!

Store your discs indoors in a dry place.
Invest in a disc mount (ref: 8796727) or a storage rack (ref: 8788246) to save space on your floor.
You can also store your weights under a piece of furniture.
Clean with a microfibre cloth if they get dusty.

Store your weight discs properly so they’ll last a long time.

An idea for a back workout focusing on building muscle mass.

Short recovery between each set

- Pull-ups 3 x 8-10 reps
- Rows with bar, pronated grip 3 x 8-10 reps
- Lumberjack rows with dumbbells 3 x 8-10 reps/side
- Face pull with elastic 3 x 12-15 reps

You can increase by one rep per week, starting with the lower end of the range. Always keep a two-rep margin.

Our coach’s workout with this 20 kg (44 lb) weight

Dumbbells & Sets

150 g/m² insulation. Brushed synthetic lining 90 g/m².

Warmth

2,000 mm rated coated fabric. Waterproof protective flap on the zipper.

Waterproof

Wide opening, inner thumb lining and elastic with coloured loop.

System for attaching mittens to a Decathlon lugiklip ski suit or jacket.

Compatibility

Stability

These warm, waterproof and clever mittens with long cuffs and wide zipped openings are very easy to put on.

Frequency

Season

reinforced area

Weather Conditions

Reinforced Palm

leash

Wadding keeps hands warm. This polyester-based synthetic material traps air according to its thickness. The thicker the wadding, the more air it contains and the warmer it is. These mittens have 150 g/m² wadding.

Will my child stay dry when playing in the snow?

Use the Lugiklip system to attach Wedze mittens onto the sleeves of their Wedze snowsuit and coat.
The fun design of Lugiklip accessories encourages your child to attach the mittens to their sleeves all on their own! The colours combine to create animal characters.
The mittens will always be ready to put on!


How do I ensure my child’s mittens won’t get lost and will keep their hands warm and dry?

If you have don't have a jacket or a ski suit, no worries! We have attached an elastic cord to the inside of the mittens to keep them on the child's hand.

How do I keep my baby from losing their mittens if I don't have the Decathlon baby ski suit or the jacket?

Kids Ski Gloves & Mittens

Brushed component for extra warmth. Raised collar with snaps. Longline cut.

Cuffs that can be folded or unfolded for 2 years of use.

Adjustable

Knit with extremely soft thread for extra comfort and softness.

Softness

3 snaps at the shoulder open the collar to get your child’s head through.

Natural stretch for better comfort and freedom of movement.

Freedom of movement

Slightly breathable base layer. Low perspiration wicking.

This base layer (or first layer) is designed to make your baby feel comfortable during their outings in the snow.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Collar Type

sleeve length

Adjustable Length

Grammage

anti-uv

Pocket

Type of Layer

top length

Style

Fastener Type

To stay warm and dry, we recommend the 3-layer technique: 
Layer 1 or a thermal base layer, to stay dry. 
Layer 2 or an insulating layer, to keep the heat in.

Layer 3: to protect against the elements.

How to dress your kids so they stay warm in the snow.

The durable, high-quality component has been tested in a lab and in the field to provide warmth and remain lightweight. The brushed knit provides the volume needed to create a layer of air that keeps your child warm.

What are the benefits of polyester?

The Base Layer Top has a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. The high collar protects the neck.

What is the cut of the Base Layer Top?

Kids' Ski Clothing

Fleece component for warmth. Elastic waistband.

Cuff that can be folded or unfolded for 2 years of use.

These base layer tights were designed to keep your toddler comfortable and warm when out enjoying the snow. Breathable fabric and moisture-wicking.

Number of Pockets

belt height

Reversible

Type of Length

Type of Bell

These Base Layer Leggings have a regular cut.
This is a classic straight cut in a stretch knit fabric that fits the body shape of every child. The elastic waistband provides good support.

Comfortable in temperatures between -5°C and -25°C.

5,000 mm water (Schmerber) waterproof coating | 100% sealed seams.

Large openings for putting your baby inside. 
Toy pocket. Storage bag included.

Ease of use

Adjustable and compatible with 3- and 5-point harnesses.

Enveloping shape with a hood.
Fleecy fabric on the back and seat.

User comfort

For children 73–95 cm (2’5”–3’2”) tall. Adjustable length with hook-and-loop.

As specialists in snow equipment for babies, we've designed this versatile multi-purpose footmuff for heading outside in cold weather.

abrasion 

adjustable height

Sportsperson’s Height

Folding Type

Practice Conditions

cover included

Hood

The design team has come up with a system that's compatible with the straps on 3- and 5-point harnesses. It means that this footmuff can be used on a toboggan, in a stroller, or in a bike trailer.

What makes this footmuff multi-purpose?

Based on our simulations, this footmuff is comfortable in temperatures between - 5°C and -25°C. We test our products in the lab to measure their thermal insulation. The measurements are taken on a thermal mannequin wearing ski clothing and accessories. The comfortable temperature is the outside temperature at which a two-year-old child is neither too warm nor too cold. This feeling will vary depending on the intensity of the activity and the individual person.

How is the comfortable temperature of this footmuff measured?

Our designers use wadding to keep your body warm. This synthetic polyester material traps air. If the wadding is thicker, it will trap more air and provide better insulation.
This footmuff uses:
- two layered pieces of wadding, each weighing 150 g/m².
- one layer of insulation with needle punch reinforcement in the seat weighing 150 g/m².
- a 220 g/m² fleece lining on the back and seat.

How can you be sure that your baby will stay warm when dragging them through snow on a toboggan?

To keep your baby warm and dry, dress them in 3 technical layers as explained below, plus accessories (snow boots, mittens, ski socks): 
- Layer 1, or a thermal base layer, to keep them dry.
- Layer 2, or an insulating layer, to keep the heat in. 
- Layer 3 to protect them from the weather.

How should you dress a baby inside this footmuff in cold or very cold weather?

This waterproof baby footmuff has passed a shower test of 60 L of water / m² / hour for 4 hours. This test reproduces the average conditions of a snow storm.

How do we check the waterproofing of this baby footmuff?

Fabrics are made waterproof by using a coating or membrane. This waterproofing is measured in Schmerber or mm H2O (the pressure exerted by a water column). The higher this number, the more waterproof the fabric. This baby footmuff is made from a coated waterproof fabric (tested under the JIS 1092 standard) that withstands 5000 mm H20 (Schmerber) before washing (the pressure of a 5 m water column).

How do we check the waterproofing of this baby footmuff's fabric?

- 20 x 19 cm (8 x 7 1/2") pocket for a toy, dummy, etc.
- Full hood that fits over a ski helmet. Rip-tab at the back for adjusting it and press-studs at the front to keep it in place.
- Flap all the way down the zip to prevent heat loss.
- Zip with multiple sliders to adjust the ventilation.
- Compact and easy to store inside its bag.
- Loops for the straps of a 3- or 5-point harness.

What are the features of the Decathlon baby footmuff?

To adapt it to your child's height (73 cm to 95 cm/2’5” to 3’2”), you can roll up the footmuff and attach the rip-tab to the bottom.

Sports/

Fitness & Combat sports/

Boxing Gear/

Punching Bags/

outshock

900 Punching Bag Stand