20,000 mm water (Schmerber) membrane: can withstand 30 mm of rain in 3 hours.

Waterproof

Ultra-resistant main fabric for greater durability.

Abrasion resistance

Adjustable straps and buttons allows them to fit your child. 2-4/4–6 years

Anatomic design

With their 20,000 mm water (Schmerber) membrane, these waterproof bib pants withstand 30 mm of water in three hours. They are a real shield against the rain! 

Ventilation Zippers

Condition

Frequency

Type of Brushing Boots

reflective

Adjustable Length

Pocket

Hood

Main Material

These bib pants offer exceptional waterproofing thanks to their 20,000 mm water (Schmerber) membrane. Your child can explore freely, even in the most tempting puddles. You have no need to worry—they’ll stay dry whatever they’re up to.  

How waterproof is it?

Top-quality waterproofing: 20,000 mm water (Schmerber). The higher the Schmerber rating, the drier your little ones will be. These bib pants can withstand water pressure equivalent to a height of 20 metres. Rated 4/5 in our shower test, they protect your child for three hours in 30 mm of rain.

What is a Schmerber?

Designed to withstand your little explorers' adventures, these bib pants combine durability and practicality. Their ultra-robust fabric can easily withstand falls. The icing on the cake: their adjustable size makes them a great investment. A reliable companion for years of adventures!

Are these bib pants durable?

The adjustable straps allow you to adjust the length of the top, while the press studs on the sides offer several width options. This means you can easily adjust the size for optimal comfort, whether your children are wearing it over thick or lightweight clothing.

Are these bib pants adjustable?

Make the waterproofing of these bib pants last longer by reactivating the water repellency every three washes or after ten uses in the rain. Three methods: 
- 15 minutes in the tumble dryer (synthetic program), 
- 2 blasts with a hairdryer from 20 cm (8”) away

How to restore water repellency

Kids' Rain Pants

Waterproof coating for 2 h of protection (5,000 Schmerbers), 100% WTP seams

Hydrophilic coating (RET = 12): limits condensation inside the garment.

Breathability

The elastic waistband and loose fit make them easy to put on over pants.

Freedom of movement

Only weighs 146 g (5 oz.) in size 10–11 years.

Lightweight

Designed to protect your child from the wind and rain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

modular

Windproof

Type of Length

Type of Bell

Schmerber

This garment has been subjected to a shower test using 60 L of water/sqm/hour for 2 hours. This test reproduces the average conditions of a rain shower in the mountains.
A waterproof rating of 5,000 mm means the fabric can withstand pressure exerted by 5,000 mm of water (the equivalent of a rain shower lasting for two hours).
 Waterproofing is expressed in Schmerbers (for example: 5,000 Schmerbers).

Waterproof feature of the component

Component breathability is measured using thermal evaporative resistance (RET). 
RET refers to a fabric’s capacity to let perspiration evaporate. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: Little breathability.
 
Our product has a 12 RET rating.

Component breathability

A fabric is water-repellent when water slides off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment must be renewed throughout the garment’s lifetime (every 3 washes). 

Component waterproofing

Technical details

Kid's Hiking Pants

10,000 mm H2O membrane (Schmerbers) for 30 mm of rain over three hours

Ripstop fabric for increased resistance to wear and tear

Durability

They can be put on and removed without having to remove your shoes.

Ease of use

Compact & clever, they can be stored in the built-in pocket & slipped into a bag

Compact design

These overtrousers have a 10,000 H2O (Schmerber) membrane and can withstand 2 mm of rain in 3 hours. Your children stay dry and the adventure continues!

Season

Customization

We’ve designed these waterproof overtrousers for hiking or playing outside, even in the event of rain or changeable weather. Owing to its 10,000 mm Schmerber waterproof fabric (equivalent to a three-hour storm), they will stay dry.

The Schmerber rating measures the waterproofing ability of a fabric. The higher the number, the drier you stay. With 10,000 mm H2O (Schmerbers), these overtrousers can withstand a water column of 10 m! Validated at 4/5 by our shower test, it will keep your children dry for up to  three hours of rain. 

What is the Schmerber?

Designed to withstand all your little explorers' adventures, these overtrousers are made with "Ripstop" fabric. This innovative material prevents tearing, even after a fall or snag.

Are these kids’ overtrousers durable?

Thanks to the practical gussets on the lower leg, your child can put them on quickly, even while wearing their shoes. No need to stop for any length of time when the rain is looming. A simple movement, and off they go! Your little adventurer is ready to continue their explorations, keeping nice and dry.

Are they easy to put on?

When the sun shines, don’t feel weighed down! These clever overtrousers are actually very small. Fold them into the built-in pocket and slip into the bottom of a bag. Compact and discreet, they patiently await their turn.

Can you store them anywhere?

Make the waterproofing properties of your overtrousers last longer! Reactivate every three washes or after 10 uses in the rain. Three easy methods: 
- 15 mins in the tumble dryer (synthetic cycle) ,
- 2 passes over with a hairdryer from 20 cm away

These waterproof overtrousers are available in three sizes: 
- 7-9 years 
- 10-12 years 
- 13-15 years 

Available sizes

Waterproof coating (5,000 mm). Main seams taped.

Wider zippers, ideal for little fingers, give kids more independence.

Easy opening/closing

The size 3–4 years weighs only 228 g (8 oz).

Ripstop fabric for greater resistance. 2-year warranty

Robustness

Designed for young adventurers, this waterproof jacket offers reliable protection against bad weather.

sleeve length

breathability (in RET)

Style

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the JIS 1092 standard).The higher the water pressure, the more waterproof the fabric.This jacket can withstand 5,000 mm of water (equivalent to a rain shower lasting 1 hour).
To approve this, the MH 500 Waterproof Hiking Jacket was placed in a shower for one hour with a volume of 60 L of water/m²/h. This test reproduces average rain shower conditions in the mountains.


How is the water resistance of the MH 500 Waterproof Hiking Jacket measured?

Fabric breathability is measured by its thermal evaporative resistance (RET). 
This allows sweat to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric.

RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability

How breathable is the MH 500 Waterproof Hiking Jacket?

Resistance to wear and abrasion test: for example, we test our fleeces in the lab to ensure they do not pill. Colourfastness test: we check colourfastness to ensure colours don’t bleed if they come into contact with saliva. Aging test: Verifies that repeated washing does not alter the fabric’s properties, performance, thickness, or appearance.

How is the resistance of the MH 500 Waterproof Hiking Jacket tested?

1/ Machine wash (30°C to 40°C): fasten hook-and-loop tabs and zippers. Use gentle detergent. Wash jackets and pants inside out. Loosen straps and elastics. 
2/ Avoid bunching the garment in the washing machine as this can damage it. 
3/ Do not mix garment types and colours. 
4/ Do not use bleach or fabric softener.
5/ Choose a long rinse and gentle spin cycle.
6/ Hang to dry or run it through the dryer (minimum temperature, minimum duration).

Care instructions

Kids' Hiking Jackets

The sole’s material and geometry help drain the water through its channels.

Grip

Easy to put on and remove thanks to its collar structure 
and heel lug.

Easy dressing

Lightweight material brings the weight down to 456 g (16 oz) in size 2./2.5.

Weight

These waterproof boots are designed to keep your child’s feet dry on a boat, in the rain, or even on a trip to the seaside.

marking outsole

Weight (g)

Removable Sole

Precipitation

Sock Height

Stitching Type

Reinforced Rubber Boots

Boots Type

shoes with left or right mark

Playing Surface

Foot Width

Boot Height

Sole Type

Tightening Type

Fastener Type

If water gets in through the top of the boot, remove the insole, rinse out the boot, and dry thoroughly by placing it upside down over a broom handle. Dry in a well-ventilated area. Turn the boot over and slip it onto a broomstick.

How to dry your boots

When your boots are smudged, simply run them under water and rub them with a sponge. If the smudges are hard to remove, you can rub them with a little soap and a wet sponge.

Sailing boots maintenance

We developed a scale to measure and rate the traction of our products in the lab.
Traction is determined by the material and design of the sole. This product has a grip level of 3 out of 5.

How do you measure the grip?

This model comes in double sizes. It’s important to choose a size that fits snugly when you’re wearing your usual socks.
If it’s too big, you’ll experience chafing, poor foot support, and poor traction.

How to choose your shoe size

The top of the boot features a ridged strip that provides extra grip while you’re pulling it on.
The heel has a lug that you can push down to remove the boots easily, even while standing.

Easy to pull on and off

These boots are lab-tested to verify waterproofing, then tested in real-life conditions.
Their one-piece construction ensures that no water can enter.

How can I be sure that my boots are 100% waterproof?

The boot’s collar may seem wide compared to your kid’s calf. But it is totally normal. A kid’s instep is really important so that they can put on the boot independently. The collar must leave enough space. This design choice helps give your kid autonomy when putting the boot on and taking it off.

Wide toe box

In size 2/2.5: 
Boot weight: 456 g (16 oz)
Outer boot height:22 cm (8.7 in)
Inner height:20 cm (7.9 in)
Width: 35 cm (13.8 in)

The boot’s inner sock is comfortable and has good insulation to keep their feet warm.
The moulded, removable sock liner is machine washable.
Do not wear barefoot. Avoid wearing shorts, as rubbing can irritate kids’ calves.

Technical features

Rain boots

100% taped seams | 2-layer coating | 5,000 mm Schmerber 

Highly breathable coated fabric (RET < 12) reduces condensation. 

Fabric specially coated to reduce the windchill factor. 

2 closed pockets. 
Non-waterproof pockets.

Pockets

Treated so water slides off the fabric surface. 

Water repellent

Materials and zips resistant to salt water and sea air. 

Resistance to salt water

This jacket is designed for inshore sailing in wet, stormy and windy conditions. Waterproof in moderate rain for 2 hours.

type of lining

Silent

type of waterproofing

type of hood

thumb pass

Zipper Type

Water-Repellent

Snow Skirt

Skill Level

Collar Type

Reversible

Membrane Construction

Lining Material

Pack

top length

We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings: 
Component resistant to water pressure of 5,000 mm before and after ageing (5 washes). This equates to 5,000 Schmerber average pressure exerted by the water during rain.
The jacket’s waterproofing has been tested in a rain shower with 60 litres of water/m²/h for 2 hours. 

Water resistance 

- High collar 
- Injection-moulded plastic to avoid salt oxidation 
- Water-repellent components (water runs off the fabric) 
- 100% taped seams 
- Central opening features a flap with a drainage channel for optimal waterproofing 

Jacket waterproofing 

To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric’s resistance, the more moisture is evaporated, and therefore the higher the fabric’s breathability.
For example: 
RET < 9 = very breathable, 
RET 9–12 = breathable.
This jacket has two components with the following RET values: 
> more resistant fabric: RET < 12 (or 3621 g/m²/24 h, JIS1099A standard)
Lighter fabric: RET < 8 (or 2972 g/m²/2 

Breathability 

The hood is attached and doesn’t stow into the collar.
Its depth is adjustable. Regulations prohibit the addition of a drawstring on the collar.
The hood visor and headband provide good coverage and a better hold.
The high collar protects the neck. 

Hood 

2 zip pockets on the front of the jacket for your hands or a few items
Pockets are not waterproof. 

Pockets 

A zip on the entire jacket length with an interior flap protects against the wind and water.
Soft fabric flap on the top of the collar to protect the chin.

Front zip 

A fabric is water-repellent when water slides off the surface of the fabric, without seeping in.
Your jacket does not become waterlogged and remains lightweight and breathable. The water-repellent treatment applied to the external side of the fabric may alter over time. 

Water repellency 

Close all zips and flaps, empty all pockets, and turn the jacket inside out. Select a synthetics cycle (30°C–40°C) and use regular detergent. Don’t use fabric softener or bleach, as these can damage the water-repellent coating.

Don’t fold your garment too much when you place it in the washing machine. Do not overload.

Very important: Run a full rinse cycle or extra rinse to remove all detergent residue. 

Washing the jacket 

Drying is a crucial phase in reactivating the water repellent treatment.
First, lay the garment flat on a drying rack. The radiator? Forget it!
Once dry, put it in the tumble dryer on a short synthetics cycle (10–15 minutes), then turn it right side out. Do not over-dry. 

How to reactivate the jacket’s water repellency 

Waterproof protection for 1 hour (5,000 mm) before washing, taped main seams.

Hydrophilic coating (RET=12): reduces condensation.

Ventilated back for greater comfort when hiking.

Ventilation

Weighs 312 g (11 oz) in size 10–11 years.

This waterproof jacket is designed to help protect your child from rain and wind during outdoor activities.

Sportsperson’s Height

Removable Hood

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the JIS 1092 standard).The higher the water pressure, the more waterproof the fabric. A component with an impermeability of 5,000 mm will therefore withstand the pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour downpour). Waterproofing is expressed in Schmerber units (for example: 5,000 Schmerbers). This number applies before washing.

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can chill the body during physical activity.

Windproof effect

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Comfort temperature between 0°C and 5°C. 
240 g/m² density fleece.

Warmth

Silicone grips and reinforcements on the palm and fingers for easier handling.

Dexterity

Touchscreen-compatible thumb and index finger.

Tactile efficiency

The fleece material allows these gloves to dry quickly in the open air.

Quick drying

These thick fleece gloves protect kids’ hands from the cold while hiking. 

Options

Thermal tests are carried out based on skin temperature measured from the finger to capture the wearer’s thermal comfort depending on the glove worn and the outdoor temperature. This is based on skiing and hiking activity.
The temperature range is calculated to provide 70% of users with thermal comfort.

Sportswear & Footwear/

Waterproof Clothing/

Rain Pants/

Kids' Rain Pants/

quechua

Kids’ Waterproof Hiking Bib Pants, NH 100 Age 2–6