100% effective on all types of Butyl inner tubes.

Compatibility

Less restrictive and just as effective as a classic patch.

Ease of use

Easy assembly/dismantling

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

Tire Assembly

Condition

Skill Level

Assembly Type

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

clearance

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Valve Type

Frequency

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

How to choose your inner tube

Remove the old inner tube using a tire lever.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Weight:

Bike Tubes & Valves

onlyonline

Volume: 0.6 L (1/10 gal). Can carry a spare inner tube, tire levers, patch kit, etc.

Capacity

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zip closure for easy access to your belongings, even when on the saddle.

Easy opening/closing

Exceptionally durable materials for a longer lifespan.

Robustness

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Height (cm)

Volume (L)

Volume (ml)

Weight (g)

reflective

Position

Attachment Type

Style

Main Material

This bag can typically hold:
- One 700 x 35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700 x 25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5" x 1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29" x 1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.This compact and light 6-in-1 multitool 100 won't slow you down while riding.4 Allen keys (3 / 4 / 5 / 6 mm [0.1, 0.15, 0.2, 0.25"]), 1 Phillips & 1 flat screwdriver

Includes 6-functions multitool

Pack of three yellow, simple, sturdy, light, and practical tire levers. Suitable for all types of tires.
Designed for removing all types of bike tires. The tip allows you to deflate the tire and its edges attach to the spokes for greater ease.PA66 polyamide material avoids breakage when bent.Tire lever that clips together for easy storage.

Includes 3 tire levers

Bike Bags & Backpacks

Stability

Compatible with bikes equipped with bottle cage screws.

Designed for carrying a water bottle on your bike.

Bike Hydration

Lets you make basic repairs and adjustments to your bike.

Versatility

4 Allen keys (3/4/5/6 mm), 1 Phillips & 1 flat screwdriver.

Weight

Tool size indicator on the ends for getting the right tool quickly.

This multitool was designed to let you make adjustments and/or repairs to your bike while out on a ride.

Intensity

Number of Functions

4 Allen keys (3/4/5/6 mm)
1 Phillips screwdriver
1 flathead screwdriver.

Includes

Spare Parts

Long-lasting rust protection in all weather conditions.

Corrosion resistance

Smooth pedalling

Lubricating the chain reduces disturbing noises.

Noise level

This lubricant is designed for lubricating your drive train during rides in all weather conditions.

Weather Conditions

Shake the bottle before use.
Only apply to the inside of the chain, i.e. the part in direct contact with the chainring teeth and the derailleur jockey wheels. 
Wipe off any excess with a microfibre cloth.

Advice from our team: 

To ensure optimal maintenance, we recommend that you follow these 3 steps: 
1. degrease your drive train
2. clean your bike
3. lubricate your chain

How to look after your bike:

This all-weather chain lube is designed for doing step 3. Once you've applied the degreaser (step 1), spray the bike with the cleaner and rinse and dry it (step 2), then apply your bike lube (step 3). Your bike will be as good as new.

How to use this product: 

Remember to degrease your chain before greasing it in order to remove any residue that could make abrasive contact with your drivetrain. This will help your equipment last longer and save you money.

Maintenance advice: 

100 mL (3 1/2 oz.) bottle = approx. 40 uses

Made in:

Capacity:

Volume: 1.5 L (1 1/3 qt).
Can hold a pump, tools, and other items.

A patch pocket on the left and a large pocket on the right.

Multiple compartments

Carry your personal belongings and repair kit when you go cycling (non-waterproof bag).

The bag can be attached to all types of bike frames thanks to the 3 rip-tabs and multiple loops present all around the bag. The long length of the rip-tabs makes it compatible with a wide variety of different frame diameters.

Universal mount

Its 1.5 L (1 1/3 qt)  capacity allows you to carry all the necessary repair gear: inner tube, pump, repair kit, as well as your small personal effects: key, credit card, telephone. 
The volume is divided into 2 parts: a patch pocket on the left and a larger pocket on the right.

The perfect volume for your short bike rides.

Under the top tube, on the seat tube or down tube, this bag can be attached anywhere depending on your bike and your needs. The fasteners placed all around the bag allow you to attach the rip-tabs wherever you want.

Can be attached anywhere on the frame.

The bag has been improved as a result of your reviews. We have removed the rounded fastenings for greater zipper durability. The loops for the rip-tabs now go all around the bag, allowing for more positioning possibilities on the frame. We've also replaced the full pocket opening by a straight zip, to avoid the bag's contents falling out by mistake.

Improved thanks to your reviews

Dyeing textiles requires a lot of water, chemicals, and energy. So to limit our impact, we use the Dope Dyed technique that involves adding colour pigments in powder form at the thread production stage (rather than soaking in dyeing baths, as is usually the case). This technique makes it possible to reduce the consumption and discharge of wastewater related to the colouring of our fabrics.

Mass dyed 

We've replaced the product packaging by textile ties made from scraps of fabric. We've thus removed all disposable packaging from the bag. You can find the product information and user guide by using the QR code placed inside the main pocket.

Removal of disposable packaging

12 lumens in white (continuous, flashing).
4 lm. in red (continuous, flashing).

Visibility

Cont. white 30h / flash. 50h
Cont. red 30h / flash. 50h
Batteries (CR2032 incl.)

Autonomy

White and red, 2 modes (continuous and flashing).
Universal elastic mount.

This front or rear bike light is designed to keep you visible. Easy to use with its 2 modes, 2 colours, and elastic fastening system.

Brightness (Lumens)

Lighting Type

Type Light

Sold In Set

Autonomy (H)

Hook Type

Power Type

Range (m)

Feedback from cyclists and other road users (drivers, pedestrians, etc.,) led to optimum features for cyclists’ visibility. 

With one purpose in mind: the cyclists’ safety.


Lights

75 dB.Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

This bell ensures your safety when riding in a less noisy environment.

Assemble With Tools But Without Tools Provided

Bike's Bells

Limits taste and odour

100% waterproof with the mouthpiece closed, non-drip with mouthpiece open.

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Comfortable mouthpiece made of soft elastomer.

Mouth comfort

Clear body graduated for easier intake monitoring.

Precision

The elastomer cap won’t slip off and makes closing the bottle easy.

Traction

Compatible with all bottle cages on the market.

Developed for demanding cyclists who want a bottle that keeps them hydrated as they ride.

isothermal

Cap Type

All of our "FastFlow" bottles use the SureSnap® valve, the best on the market. This valve controls the flow of water effectively and precisely. When you press down, water squirts out of the mouthpiece.
Plus, the anti-leak mouthpiece can stay open while riding without water dripping onto your bike's frame.

SureSnap® valve

The mouthpiece is 100% watertight in closed position. Use this position for mixing the isotonic drink in the bottle or for carrying it in a bag.
Once on your bike, leave it open. The SureSnap® valve prevent leaks. Drink quickly and safely!

How to use the FastFlow valve

There’s nothing worse than a plasticky taste or smell in a water bottle. But this is the case for most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is supple and has a neutral taste and smell. When blind tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap, and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C).

How to care for your water bottle

700x35 to 700x45 tires (28"). 48-mm valve.
ETRTO 35/45 – 622

Compatible with 700 diameter tires, with a cross-section ranging from 35 to 45 and a 48-mm Presta valve.

Check the sidewall for tire information (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5” diameter that is 1.90” wide.
The dimensions in mm (ETRTO international unit) are also on the tire sidewall.
For example 50-584 means the tire is 50 mm wide with an inner diameter of 584 mm (or 27.5 x 1.90).

Remove the old inner tube using Btwin tire levers.

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Pro tip

The height can be adjusted without tools.

Adjustable

Designed for parking a bike weighing maximum 25 kg (including baggage). Tool-free length adjustment. Kickstand weight: 350g.

removable

Foldable

Maximum Load

Attachment

Item Weight

The 500 chainstay stand attaches to your bike's chainstay (screws included).

Where does it mount onto your bike?

Given the variety of bikes, frame shapes, and bottom bracket heights, we recommend asking our sales assistants for help.

What kind of bike is it for?

Bike Kickstand

Enables you to carry out standard bike adjustments and repairs.

Allen keys: 2, 2.5, 3, 4, 5, 6, 8 mm [5/64", 3/32", 7/64", 5/32", 3/16", 7/32", 5/16"].
T25 Torx keys.
PH2 Phillips screwdriver.
8, 9, and 10 chain tool with storage handle.
Spoke wrench: 3.2 mm (0.127") / 3.3 mm (0.130") / 3.5 mm (0.136").

Composition: 

The 3 products are suitable for every kind of bike, mechanical, or electric.

Get your drive train and your bike in perfect shape.

Visual efficiency

With its compact size, you can take the kit everywhere with you.

This bike cleaning kit follows just 3 steps: degrease, clean and lubricate. Care for your electric, road, city, mountain, hybrid bike and more.

Sports/

Cycling/

Bike Accessories/

Bike Pumps/

decathlon

100 Hand Pump