Compatible with all Shimano SRAM brakes on all types of bikes.

Compatibility

Designed for replacing the brake cables and housing on all types of bikes

Brake Type

2 cables, 1 hose, and cable and hose caps.1 x 2 m (6'7") cable.
1 x 1.5 m (5') cable.
1 x 2 m (6'7") hose.

Technical information

Drivetrains

Replaces the brake housing on your bike. 
Compatible with all bike brands and types

Housing has a 5 mm outer diameter.
Length: 2 m.

Cleaning and lubricating cables on a regular basis is recommended to prolong their life. Do not clean with high pressure power washers.

Maintenance tips:

Brakes

Compatible with 20" and 24" kids’ bikes with V-brakes.


Ergonomically designed for children’s hands.

Ergonomic grip

Power

Replace the levers on 20" and 24" kids’ bikes.

Position

Use 2 screws (not supplied) to easily attach hook.

Easy assembly/dismantling

Hang any type of bike by the front or rear wheel.

Flexibility

Robustness

Hang your bike from a wall or ceiling with ease.

Attachment

Number of Bicycles

Frequency

Diameter: 94 mm
Depth: 128 mm
Maximum space for wheel: 90 mm
Space between the two mounting screws: 85 mm

Features: 

Before attaching bike storage hook, leave enough space between the ceiling and hook (roughly a half-wheel of space) to easily hook and unhook bike.
Adapt hardware (wall plugs and screws) to the type of wall and seek professional advice if needed.

Hook mounting tips:

2 installation methods:
- Perpendicular to the wall (with the two vertical pre-drilled holes), to store bike with tires flush to wall 
- Vertically (with horizontal mounting holes), to store bike parallel to the wall

Mounting: 

Verifying the wall type (solid, plasterboard, brick, etc.) to ensure you have the right screws and wall plugs is recommended.

For example: On a solid wall, 40 mm wall plugs and PZ 2 screws with dimensions of minimum 5 x 60 mm are recommended. 

Screws: 

Transport

clearance

Has a shelf for your tools and a 360° rotating clamp.

Ease of use

Can be folded against the central tube. 
Bike workstand dimensions when folded:120 x 12 x 9 cm

Compact design

Adjusts in height for better comfort while working.

Adjustable

Stable enough to hold bikes weighing up to 20 kg/44 lb thanks to its tripod

Stability

This bike workstand was designed to help you to take care of your bike indoors or outdoors on a sturdy stand.

For greater comfort during maintenance, clamping the bike so that the rear wheel is higher than the front wheel is recommended. This will keep the handlebars level.

Our advice for positioning your bike: 

You can use this workstand with bikes weighing up to 20 kg/44 lb and frame tubes with a maximum diameter of 5 cm.

What kind of bike is it for?

While assembling, remember to position one of the three feet in line with the arm to ensure the best possible stability.

ASSEMBLING YOUR WORKSTAND

Maintenance Tools

All brands of drivetrains and all types of bikes (Shimano, Sram, and Campagnolo)

Two cables, one housing, and cable and housing caps

Capacity

Replacement derailleur cable and housing for all types of bikes.

Derailleur Position

Two cables
One housing (for front and rear derailleurs) 
Cable and housing caps

Technical features

onlyonline

Protects and prevents damage to the derailleur and brake cables on your bike.

Adjust cable tension to adjust braking power.

Adjusts the tension of the brake cable at the calipers on cantilever brakes.

Designed for all bike brands and types (Shimano, SRAM, and Campagnolo).

Pre-stretched and polished stainless steel cable for less friction

Corrosion resistance

For replacing bike brake cables. Universal brake cable.

Stretchy so you can quickly fit it over your saddle.

Protects your clothes when the saddle is wet or dirty.

Non-messy

This saddle cover was designed for protecting your clothes when the saddle is wet or dirty because of poor weather.
Compatible with saddles < 16 cm (6 1/4") in width.

Maximum wash temperature 95°C. Normal cycle.

Maximum wash temperature of 30°C. Very delicate cycle.

Iron at a maximum soleplate temperature of 150°C.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

The saddle cover should not stay permanently on the saddle. Use only if the seat is wet and you’re going for a ride. Once your ride is over, remove the saddle cover to prevent moisture from building up inside.

How to use:

Saddles

For cantilever type brake levers (cable pulled through the centre).

Designed for replacing the cable and triangle on a pair of cantilever brake callipers.

Sports/

Cycling/

Components/

Brakes/

decathlon assurance sports

Cantilever Cable and Hanger