Holds up to 10 kg. Not suitable for carrying a child. 

Volume

Includes mounting hardware.
Adjustable length and height. 

Easy assembly/dismantling

All 24 to 28" bikes with frames equipped with inserts.

Compatibility

Includes a plate for attaching a rear light or Vioo Clip. 

Ease of use

Lightweight

This bike pannier rack is ideal for carrying your belongings: baggage, baskets, bags, etc. A lightweight and affordable pannier rack that holds up to 10 kg.

Skill Level

Disc Brake Compatibility

Wheel Size

Position

Important: this pannier rack is not compatible with the following bike models: The Btwin Original 7, road bikes, bikes with disc brakes, bikes not equipped with inserts on the wheel axle and on the rear stays, some electric bikes, full suspension mountain bikes and folding bikes. 

Includes a hook for attaching a Vioo Clip, and an easy-to-attach LED light.
With a red or white continuous or flashing light, the Vioo Clip makes you clearly visible from up to 120 m away.
Battery life: 9 hours (flashing mode) and 4,5 hrs (continuous mode). Easy USB charging.

Visibility

Frame: Aluminum and steel.

Rack: Polypropylene.

Composition

Transport

It effectively protects your lower back from muddy spray.

Non-messy

Fits to its screwed-on bracket in just one click and keeps its position setting

It fits 26” to 29” mountain bikes with 25.4 to 34.9 mm seat posts.

Weight

Designed to protect you from muddy spray kicked up by your back wheel when mountain biking.

Attachment Type

This fender stops mud from getting sprayed onto riders’ lower backs.

You can’t completely avoid muddy splatters when it’s damp.
But for getting from A to B, we recommend using a hybrid bike fender with a longer blade that’s closer to the wheel.
If you want total protection and have a compatible bike, get yourself a city bike fender with a much fuller blade that attaches using stays.

Level of protection

This fender fits all 26”–29” mountain bikes, including 27.5+ bikes, with 2.8”-wide tires in 27.5”, and 2.6”-wide tires in 29".

To ensure a good fit, the diameter of the seat post must be between 25.4 and 34.9 mm.

Bike compatibility

The fender comes fully assembled and ready to be installed.

Box contents

You’ll need a 4 mm Allen key.
There are 2 screws for installing the bracket to the seat post.
The angle of the blade can be adjusted to make it sit as close as possible to the wheel.

Installing the fender

With dimensions that fit all the new wheel and tire sizes on the market and a bold design, our fender gives your bike a modern, dynamic look.

Everything has been designed to give you the best experience:
- A reliable screw-on bracket that holds the fender in the same position each time
- An easy system to clip the blade onto and take it off your bike depending on the weather
- Compatible with accessories (camera, lights)

A modern, efficient design

In dry weather, you can unclip the blade from the rear bracket and clip a sports camera on instead. The camera must be compatible with the GoPro bracket system.

To keep you safe when riding early in the morning or late at night, there’s a rail at the end of the blade that you can clip a CL 100 LED rear light to. Product ref: 8538019.

Compatible accessories


Blade length: 497 mm
Blade width: 73 to 95 mm
Total weight: 230 g

Dimensions and weight

Locks & Stands

This kit effectively protects your lower back, chest, and face from muddy spray.

Fits to its screwed-on bracket in just one click and keeps its position setting.

This kit fits 26" to 29" mountain bikes with a telescopic fork.

The rear features a "fuse" arm (that unclips) in case of high impacts

Robustness

Eco-design measues have allowed us to reduce the impact of this product by 43%.

Eco-design

Front weight: 120 g (4 oz.)
Rear weight: 230 g (8 oz.)
Total: 350 g (12 oz.)

This 26" to 29" front and rear bike mudguard kit was designed to protect the lower back, torso, and face from mud splashes while mountain biking

This wide, shock-resistant mudguard kit stops mud getting sprayed onto the rider's lower back, chest, and face.
For best results, position the rear mudguard blade as close as possible (2 to 3 cm [1 to 1 1/2"]) to the wheel.

You can't completely avoid muddy splatters when it's damp...
But for getting from A to B, we recommend using a hybrid bike mudguard kit (with longer blades that are closer to the wheels), if compatible with your bike frame and tire width.


This kit is suitable for 26" to 29" mountain bikes, with a tire width up to 2.8" in 27.5" and 2.6" in 29", equipped with a telescopic fork.

To ensure a good fit at the front, the internal diameter of the steerer tube must be between 18 and 34 mm (7/10" and 1 1/3").If the front blade interferes with the underside of the frame (for example in small sizes), it is possible to move the blade forward.

To ensure a good fit at the rear, the diameter of the seat post must be between 25.4 and 34.9 mm (1" and 1 1/3").

The front mudguard comes fully assembled and ready to be mounted, with a 23 mm (1") medium expansion socket.
To make this product compatible with as many different telescopic forks as possible, there are 2 additional expansion sockets included in this kit: 1 smaller, 18 mm (7/10") one and 1 bigger, 33 mm (1 1/4") one.The rear fender comes fully assembled and ready to be mounted, no matter the diameter of your seat post.

With dimensions that fit all the new wheel and tire sizes on the market and a bold design, our fenders give your bike a modern, dynamic look.

Everything has been designed to give you the best experience:
- A reliable screw-on bracket that holds the fenders in the same position each time
- An easy system to clip the blade onto and take it off your bike depending on the weather
- Compatible with accessories (camera, lights)

 the blades (front and rear) as well as the "fuse" arm (rear) are made of 100% PP (polypropylene).

In dry weather, you can unclip the blade from the rear bracket and clip a sports camera on instead. The camera must be compatible with the GoPro bracket system.

To keep you safe when riding early in the morning or late at night, there's a rail at the end of the rear blade that you can clip a rear, red light to: CL 100, CL 500, CL 900, ST 500, or RL 510 LED. 

Front: 
Blade length: 553 mm (23")
Blade width: 73 to 97 mm (3" to 4")
Total weight: 120 g (4 oz.)

Rear:

Blade length: 497 mm (20")
Blade width: 73 to 95 mm (3" to 4")
Total weight: 230 g (8 oz.)

Suitable for 24" to 28" bikes. Check that they fit your bike frame.

Universal attachment on a frame or fork with inserts. 

Attach the Vioo Clip visibility light at the rear using an insert.

Front and rear section effectively protect from tire spray.

Say goodbye to splashes and mud splatters!  Designed for front and rear bike wheels.

Weather Conditions

Assembly Type

Fits the vast majority of 24 to 28" bikes.

Your bike must be equipped with inserts for attaching the mudguards. Ask a sales assistant to be sure.

Which bikes are compatible with this mudguard?

Includes a hook for attaching a Vioo Clip and an easy-to-attach LED light.
Red or white light that can be used in continuous or flashing mode. Vioo Clip lighting ensures visibility from up to 120 m away. Battery life: 9 hrs (flashing mode) and 4½ hrs (continuous mode). Easy to recharge via USB (sold with the Vioo Clip).

Wide coverage protects the back and feet.

Stability

Designed for Riverside 500, 500E, 900 or 920 models.

Fits Riverside 500, 500E, 900 and 920 models.

Max. width of tires

Front length: 635 mm.
Back length: 1147 mm.

Mudguard length

Steel stays.
Steel screws.
Plastic blades (ABS-PC).

Materials

Compatible with bikes equipped with bottle cage screws.

Designed for carrying a water bottle on your bike.

Hydration

clearance

Bag volume: 0.5 L.Contains a multi-tool and 3 tire levers.

Capacity

Attaches under any saddle using velcro tabs.

Easy-to-open zipper.
Cleans easily with water.

Carries bike adjustment or puncture repair essentials.

Maximum wash temperature 95°C. Normal cycle.

Maximum wash temperature of 30°C. Very delicate cycle.

Iron at a maximum soleplate temperature of 150°C.

Maximum wash temperature 70°C. Normal cycle.

Ironing at a maximum iron soleplate temperature of 200°C.

Can carry:
- 1 road inner tube (700) + 3 tire levers + 1 multitool + 2 x CO2 cartridges OR - 1 MTB inner tube (27.5") + 3 tire levers + 1 CO2 multitool

Inner tube and CO2 cartridges not included.

Includes a hook for attaching a Vioo Clip and an easy-to-attach LED light. With a red or white continuous or flashing light, the Vioo Clip makes you clearly visible from up to 120 m away. Battery life: 9 hrs (flashing mode) and 4½ hrs (continuous mode). Easy to recharge via USB (sold with the Vioo Clip).

Effectively protects your upper body and face from muddy splashes

It fits 26" to 29" mountain bikes with a telescopic fork.

Designed to protect you from muddy spray kicked up by your front wheel when mountain biking.

This fender stops mud from getting sprayed onto riders’ chests and faces.

You can’t completely avoid muddy splatters when it’s damp.
But for getting from A to B, we recommend using a hybrid bike fender with a longer blade that’s closer to the wheel.
If you want total protection and have a compatible bike, get yourself a city bike fender with a much fuller blade that attaches using stays.

This fender fits all 26”–29" mountain bikes with 2.8”-wide tires, including 27.5+ bikes, along with most telescopic forks.

To ensure a good fit, the internal diameter of the steerer tube must be between 18 and 34 mm.

This fender comes fully assembled and ready to be mounted, with a medium expansion socket.
To make this product compatible with as many different suspension forks as possible, there are 2 additional expansion sockets (the smallest and the biggest size) included in this kit.

You’ll need a 2.5 mm Allen key.
To mount the bracket, choose the appropriate expansion socket based on the inner diameter of the steerer tube:
- Small: 18 mm socket
- Medium: 23 mm socket
- Large: 33 mm socket
The fender can be moved forward by choosing the most appropriate hole on the bracket.
The fender’s blade then easily clips onto the bracket.

With dimensions that fit all the new wheel and tire sizes on the market and a bold design, our fender gives your bike a modern, dynamic look.

Everything has been designed to give you the best experience:
- A reliable screw-on bracket that holds the fender in the same position each time
- An easy system to clip the blade onto and take it off your bike depending on the weather

Blade length: 553 mm
Blade width: 73 to 97 mm
Total weight: 120 g

You’ll forget it’s on:the comfortable, removable foam pads prevent pressure points.

User comfort

The 3D tightening system locks the helmet in place during your rides.

Adjustable

Fixed side straps. Quick and easy to pull your ponytail through.

Ventilation

Compatible with a ponytail and a rear clip-on light.

Impact protection

Size S: 280 g (10 oz.)
Size M: 320 g (11 oz.)
Size L: 370 g (13 oz.) 

This well-ventilated, adjustable mountain biking helmet is designed for long rides (over 2 hours).

Adjustable Helmet

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Adjustment Dial

Practice Conditions

Style

Certification

Detachable Visor

Tightening Type

Fastener Type

17 vents
Chinstrap fastening: clip
Occipital adjustment: 360° dial
Comfort foam: detachable and washable (available from after-sales)
Visor: fixed, detachable
Outer shell: polycarbonate In-muold.
Compatibility: ponytail and clip-on light (rear)
Space requirements, size M: Length: 30 cm (12"). Width: 21 cm (8 1/4"). Height: 15.5 cm (6")

Features

To find your helmet size, simply measure the circumference of your head (around the forehead). This mountain bike helmet comes in three sizes:
S: 52–55 cm (20 1/2" - 21 2/3")
M: 55–59 cm (21 2/3" - 23 1/4")
L: 59–62 cm (23 1/4" - 24 2/5")

How to choose your helmet size

European standard sets the requirements and test methods for helmets to be worn by users of rollerblades, skateboards, scooters, and bicycles. The corresponding requirements and test methods cover the following aspects: construction, including field of vision; shock absorption properties; characteristics of the retention system, including the chinstrap and tightening devices; marking and information.

EN 1078 Certified

A cushioning foam replacement kit is available for this helmet on our website.

Please note that on some helmets, the colour of the EVA cushioning foam (in contact with the top of the head) may vary.

Cushioning foam

We recommend replacing your helmet in these two cases:
1. After a fall: 
In the event of a fall, the material of your helmet can deteriorate or even break. Sometimes, you won't even notice. That’s why we recommend replacing it if you have the slightest doubt.
2. After five years of use:
The foam deteriorates. It can deteriorate due to impact, storage location, the climate, and its use. We therefore recommend replacing your helmet at least every five years.

When should I replace my helmet?

Three easy steps for adjusting your helmet in two minutes:
1. If necessary, pull your ponytail through the back of the helmet (lower the dial’s rim).
2. Clip the straps together with the buckle and adjust: make sure you can slide two fingers between the strap and your chin.
3. Adjust the tightness around your head using the rear dial.
The helmet should be in contact with your head without tipping forward, backward, or sideways, even when you’re moving.

How do you adjust the helmet?

Based at the Btwin Village in Lille, our product design team constantly works to make cycling more comfortable for our users.
Our goal is to create products that respond to our users’ needs and promote a good cycling experience.

Product tests

Make sure that this helmet fits you properly.

If you do need to return it, make sure it still has the instructions, labels and, where applicable, original packaging so that it can be reconditioned. Let’s take care of our planet, together.
Conditions: https://www.decathlon.ca/en/content/12-returns-and-refunds

Return conditions for personal protective equipment

Helmets

Capacity: 0.6 L. Fits a spare inner tube, tire levers, patch kit, etc.

Universal, dual-fastening velcro straps. 

Easy-to-open zipper. Rigid reinforcement.
Cleans easily with water.

Dual-attachment system (seat post and saddle rail).

Semi-rigid with a foam lining to keep your belongings safe.

Content protection

Multiple compartments

Designed to carry the minimum supplies needed for bike repairs and small personal belongings. 

Can carry:
two road inner tubes (700) + three tire levers + one multi-tool + two CO2 cartridges OR one MTB inner tube (27.5”) + three tire levers + one multi-tool + two CO2 cartridges

This product has a hook for attaching a Vioo Clip, an LED light that can be clipped on and off in an instant. With a red or white continuous or flashing light, the Vioo Clip makes you clearly visible from up to 120 m away. Battery life: 9 hrs in flashing mode or 4½ hrs in continuous mode. Easy to recharge with a USB cable (sold with the Vioo Clip).

Protects face from spray coming off the front wheel.

Easily attaches and detaches from fork with the three mudguard mounts.

It fits mountain bike forks with a front and rear arch.

Keep the mudguard in place with Colson-type detachable zip ties.

Compact design

Designed to protect from spray and debris kicked up by MTB's front wheel.

These ultra-compact, ultra-lightweight, and portable mudguards protect buttocks and back from rain and mud splashes. 
When mountain biking, you always get dirty in wet and muddy conditions. You can never escape it entirely.

Sports/

Cycling/

Bike Accessories/

Locks & Stands/

rockrider

Flash Mountain Bike Mudguard - Black