onlyonline

For Shimano, Sram, and Btwin 8-speed cassette bodies and chains

Compatibility

Designed for bikes equipped with cassette bodies and a 9-speed chain.

Set of Teeth

Number of Speeds

Gears: 11-12-14-16-18-21-24-28-32.
11-32 teeth
360 g

Technical information

Degrease, clean and lubricate your cassette regularly to prolong life. Replacing the chain each time the cassette is replaced is recommended. Do not clean using high-pressure water jets

Care instructions

Easy assembly with a cassette remover wrench available on our website 
(ref: 8351088) and an adjustable or open-ended spanner.

Mounting

Easy disassembly with a cassette remover wrench available on our website 
(ref: 8351088) and an adjustable spanner or open-ended spanner and a chain-whip tool.

Dismantling

Drivetrains

For 6-speed drive trains and screw-on freewheels.

Easy assembly/dismantling

Designed for 6-speed bicycles equipped with a screw-on freewheel.

Easy assembly using a freewheel tool (Available on our website, ref:  8351087) and an adjustable or open-ended spanner.

Easy disassembly using a freewheel tool (Available on our website, ref: 8351087) and an adjustable or open-ended spanner.

Gears: 14-16-18-21-24-28 teeth.
14-28 teeth
450 g

clearance

Capacity

Multiple compartments easily store and carry tools.

Easy transport

Developed for any type of repair or maintenance on any kind of bike.

Number of Tools

1 bottom bracket spanner (Hollowtech II, Truvativ GXP, FSA & MegaExo).
1 crank arm bolt puller.
1 spoke wrench (9, 10, 11, 12, 13, 14, 15G).
1 Shimano HG cassette remover.
3 tire levers.
1 Torx key (T25).
1 chain whip.
1 pedal spanner (15 mm).
6 Allen key (2/2.5/3/4/5/6).
1 square tapered crank remover.
1 8-mm socket spanner. 
1 socket holder or puller.
1 chain tool (6- to 10-speed).

Composition

Maintenance Tools

For 7-speed transmissions and screw-in freewheels.

Designed for 7-speed bicycles equipped with a screw-on freewheel.

Gears: 14-16-18-20-22-24-28 teeth.
Teeth: 14-8
500 g

Removal using an open-ended spanner and a chain-whip tool.

Removal using a 21 mm open-ended spanner and a chain-whip tool.

Ease of use

Robustness

This tool was designed for removing and/or mounting your Shimano or Sram type cassette

A chain-whip tool is needed to use this tool for dismounting a cassette.
The chain-whip tool prevents the cassette from turning, so that the support nut can be unscrewed.

Advice from our team

Compatible with 10-speed Shimano, Campagnolo, and Sram derailleurs

Replacement chain for your 10-speed bike. Compatible with 10-speed Shimano, Campagnolo, and Sram derailleurs

Number of Links

Easy assembly: modify the chain length with a chain tool available on our website (ref: 8351521)

Installation

Easy disassembly: use a chain tool and/or a quick-release chain tool available on our website (ref: 8352339 and 8351521)

Removal

Number of links

Comfortable, raised position, adjustable stem, carbon fork, aluminum frame.

Cycling comfort

Mechanical disc brakes: effective and progressive, even in damp conditions.

Brake control

Can be fitted with mudguards and a front or rear pannier rack.

Versatility

Triban offers a lifetime warranty on the frame, stem, handlebar, and seat post.

Lifetime warranty

We've designed this bike to make it easy for riders to make progress. Its versatility and selection of speeds will allow you to explore any kind of road.

Type of Bike Frame

Intensity

Skill Level

Frequency

Number of Chainrings

Wheel Size

Type of Bicycle Fork

With Kickstand

Brake Type

Playing Surface

Suspension

Choose your bike size based on your height and build (arm span and leg length).
If you are between sizes, a smaller size fosters a more athletic position while a larger size provides more comfort.
XS: 155 to 165 cm
S: 165 to 173 cm
M: 173 to 182 cm
L: 182 to 190 cm
XL: 190 to 200 cm

Choosing the Right Size

Comfort geometry, with a longer headtube and shorter top tube, offers a more upright positions than a classic road frame.
6061 T6 aluminum sloping frame with semi-integrated headset.
Frame weight, size M: 1830 g

Frame

Lighter carbon fork provides more precise directional control.
Aheadset 1 1/8" steerer tube makes the steering assembly strong and rigid.
Insert in the fork to attach a pannier rack. Maximum load on the fork: 9 kg

Fork

Ergonomic handlebars for better traction and greater comfort.
Handlebar width (centre-to-centre): XS, S, M: 400 mm
L, XL: 420 mm

Triban forged stem:
XS: 70 mm
S: 80 mm 
M: 90 mm
L: 100 mm
XL: 110 mm

Handlebar/Stem/Steering

High-precision, sturdy Microshift 8-speed shifter.
Very comfortable design: the shifter is easy to operate, no matter the hand size. Front  Microshift derailleur and high-precision Microshift rear derailleur

Drivetrain

Microshift CS-H081 11-34 cassette
(11/13/15/18/21/24/28/34)
Triban crankset aluminum double chainring in 50/34.

Crank arm length: 170 mm

Crankset/Cassette

Promax DSK-300R disc brakes.
160 mm disc brakes at front and rear
Jagwire anti-compression housing guarantees braking precision and efficiency
Semi-metal pad

Brakes

Triban Tubeless ready* wheel
6061T6 aluminum
 24 mm high for greater lateral rigidity
Crossed steel spokes increase rigidity (28 front and 28 rear)
*Conversion kit required, including two tubeless valves, two rim strips, and a bottle of anti-puncture liquid.

Wheels

Triban Protect: 700 x 28 Skin Wall puncture protection.

Tires

New Triban ErgoFit saddle. Hammock design for greater comfort. Triban aluminum seat post. Easy-to-adjust saddle.

Diameter: 27.2 mm.
Length: 350 mm in M / L / XL, 250 mm in XS / S.

Saddle/Seat Post

Pedals

Bike supplied with bell and front, rear, and wheel reflectors

Accessories/Equipment

Weight

Your bike's components (chain, derailleur, brakes, etc.) will need adjustments over time. Take advantage of a free tune-up for one year after purchase. Our technicians will carry out a 13-point check of your bike. Just visit your nearest Decathlon workshop with your Decathlon membership card and/or receipt.

After-Sales Service

Road Bikes

Compatible with Bluetooth, ANT+, and Zwift.

Connectivity

Built-in power sensor, 1,500 watts, incline simulation of 10%.

Power

Accurately measures your power with less than 3% discrepancy.

Parameter measurement

For more realistic sensations and precise power measurements. It can handle sprints of up to 1,500 watts and is Compatible with Bluetooth, ANT+, and Zwift.

Control Type

Resistance Type

Maximum Power (W)

Interactive

Place of Practice

The Flux S Smart has everything you need in a direct drive smart turbo trainer. Reliable, precise, silent, and sturdy for a great ride. This trainer is the perfect for hours of intensive indoor cycling with your favourite apps.

Flux S turbo trainer

With its fully redesigned electronics system, the Flux S now has more reactive motor control. That means a more fluid pedalling feel than the previous model. This trainer features dynamic inertia and compensates for weight, speed, and incline angle. This gives cyclists the most realistic and fluid pedalling feel possible. A 7.6 kg-flywheel offers realistic sensations and good reactivity.

Smooth pedalling feel

Unrivalled power. The Flux S Smart can handle sprints of up to 1,500 watts and simulates climbs of up to 10%. It is ideal for even the most intense training sessions.

Powerful

The Flux S is compatible with a wide range of axles and comes with adaptors for non-compatible ones. The direct drive is compatible with 142 x 12 mm and 148 x 12 mm axles—no adaptor required.

Axle compatibility

Explore the world with high-quality videos and GPS training sessions as you challenge your friends. Train seriously with structured plans and sessions. Analyze your data, export your activities to Strava, and enjoy numerous other features.
1-month free subscription.

Tacx cycling software.

Compatible with Zwift.

Type of trainer: Interactive Smart direct drive trainer with motorized braking.
Magnets: 32 neodymium magnets.
Drive train: No.
Electric specifications: 110–240 volts; can be plugged into mains.
Power indicator: Multicoloured light and floor spot.
Connection indicator (ANT+/Bluetooth): 2 LED lights.
Option to update firmware: Yes.
Appropriate cassettes: Shimano and SRAM: 8–11 speed. Campagnolo hub sold separately.

Technical features

Wireless communication: ANT+ FE-C, Bluetooth Smart open
Controls: Smartphone, tablet, ANT+ FE-C bike computer, standalone, computer via ANT+ antenna.
Data: Cadence, power, speed.
Display: Smartphone, tablet, bike computer, sports watch, computer via ANT+ antenna.
Accuracy: 3%

More technical features

One-month subscription to the Tacx Premium program, direct assembly and quick-release attachment with kit (142 x 12 mm and 148 x 12 mm), quick-release attachment for road and mountain bikes (5 mm).

Comes with

Bike Trainers & Cyclometers

Designed for bikes equipped with cassette bodies and 8-speed chains.

Gears: 12-13-15-18-21-24-28-32.
12-32 teeth
341 g

Degrease, clean, and lubricate your cassette regularly to prolong life. Replacing the chain each time the cassette is replaced is recommended. Do not clean using high-pressure water jets

Comfort geometry for a more upright position, 700 x 32 tires

Single-chainring drivetrain and curved handlebars with speed control shifter

Hybrid road/trail tires, can be fitted with a 900 pannier rack

6061 aluminum frame. Comfort road geometry

Efficiency

Lifetime warranty on: frame, stem, handlebars and fork. Details on btwin.com

This aluminuim bike has been designed specifically for and with beginners. It offers comfort and straightforward use, with simple speed changes.

Handlebar Type

Comfort geometry, with a longer headtube and shorter top tube, offers a more upright positions than a classic road frame. 6061 T6 aluminum sloping frame with semi-integrated headset. Frame weight, size M: 1830 g.

Straight steel fork for great comfort and precision. 

Aheadset 1 1/8" headset makes the steering assembly strong and rigid

Aluminum Btwin Sport handlebar - Handlebar width (axle-axle):
420 mm

Btwin Sport aluminum stem 
Length: XS: 90 mm
S: 90 mm 
M: 90 mm
L: 110 mm
XL: 110 mm

7-speed Shimano A050 indexed shifter on the handlebar.
Ergonomic and very comfortable: change speeds without letting go of the top part of the handlebar. 
This ergonomically-shaped lever fits the palm of your hand perfectly. 


Single chainring is easier to use and lighter. 44 teeth. Cranks: 170 mm. Cassette: Microshift 12-28.

Tektro RL 340 brake levers with a good grip and excellent rigidity

Cartridge brakes

Btwin 700 double-walled sport wheels.

Quick-release 9 mm-mounting for easy transport and handling

Btwin Sport 700x32 hybrid tires. The tread has small studs for increased traction. Larger studs on the sides of the tires improve grip in corners on packed or loose dirt and on gravel.

Btwin Sport 100 Black saddle
Btwin Sport aluminum seat post.
Diameter: 27.2 mm for added comfort thanks to its flexibility Length: 250 mm on XS / S 
350 mm on M / L / XL

Versatile platform pedals for good traction on trails

Comes with a front- and rear-lighting kit and bell.

For Shimano, SRAM, and Btwin 10-speed cassette bodies and chains

Designed for road bikes equipped with a 10-speed drive train

Gears: 11-12-13-14-15-17-19-21-24-28.
11-28 teeth
264 g.

Sports/

Cycling/

Components/

Drivetrains/

decathlon assurance sports

11-28 10-Speed Road Bike Cassette