A usable volume of 12 L and a 2 L water bladder: hydration for up to four hours.

Capacity

1 large compartment, 1 tool pocket, 2 side pockets, 1 helmet gusset, etc.

Multiple compartments

Adjustable shoulder straps, waist strap, and chest strap.

Stability

3D mesh pads at the back and hips for ventilation.

Carrying comfort

The bag comes with a built-in protective rain and mud cover.

Watertight

Visibility

This hydration backpack was designed for easy hydration when mountain biking for less than four hours.

Waterproof

Volume (L)

Options

Condition

Practice Conditions

Skill Level

Weight (g)

Water Bladder Volume

Fastener Type

Main Material

Clean your water bladder after each use. 

To help you clean out the tube, you can order a special brush (ref. number 5935596). 
This kit comes with a hanger to make it easier to dry out the inside of the bladder.
Tip: If you don’t want your drinks to taste like plastic, wash the bladder, dry it well, and place it in your freezer. 
Take it out a few hours before your ride. This will stop any flavour transfer.

Maintenance tips:

This hydration pack comes with a 2 L water bladder. But also remember to bring:
- food (granola bars, energy gels, etc.)
- a multi-function adjustment tool (ref: 8386669)
- a puncture repair kit (inner tube, tire lever, hand pump, puncture repair spray, CO² cartridge, etc.)
- a chain rivet extractor and a quick link
- a piece of identification (blood type card)
- a means of payment and a telephone
- a first aid kit


What to bring with you

The 2-litre capacity means your water bladder will give you hydration for around 3 hours of riding. 

The wide opening makes it quick to fill up. When closing it, make sure the slider clips into place so it doesn’t leak.

A large water bladder

Before you set off, remember to remove the air to improve water flow. 
Once filled, just turn the hydration bladder upside down, direct the air bubbles toward the tube opening, and suck them out. 
The bite valve locks (rotates 180°) to prevent leaks when not in use. It won’t drip, even in the open position. 
To get a good flow when drinking, pinch the valve with your mouth and suck.

Great water flow

To make your bag last longer, we recommend waterproofing it before you first use it. Even though the fabric is already water-repellent, extra waterproofing will stop mud from getting caked onto it. 

Before each ride, remember to wash and dry your water bladder with the cleaning kit (ref. number 5935596). Place your dry water bladder in your freezer overnight to get rid of any plastic taste. This will stop any flavour transfer.

Care instructions

Remember to take a look at our water bladder support page for tips on how to make your water bladder last longer.

Extending the product’s lifespan

Hydration

A usable volume of 4 L and a 1 L water bladder: Stay hydrated for two hours.

1 large compartment divided in 2 for the water bladder, 2 zipped side pockets.

Parachute-style bindings make straps adjustable.

Perforated foam back and mesh straps for ventilation.

Light-compatible insert (Vioo Clip) on the back of the bag.

Zippers open easily using the attached cords, even with gloves:3 pockets.


Ease of use

This hydration backpack was designed for easy hydration when mountain biking for less than two hours.

A large central compartment divided in two:
1- to store an inner tube, a mini pump, a windproof jacket, etc. 
2 - for the 1 L water bladder with a hook to hold it in place.

A second pocket on the front of the bag with 3 separators for tissues, tire lever, multitool, or cereal bars, plus a net pocket for papers and keys.

And a third zippered pocket for a mobile phone: easy access for photos.

Everything within reach as you ride!

Your bag comes with a 1 L water bladder. Suitable for temperatures between -20°C and +40°C, for water: do not fill with milk or alcohol, or put in the microwave.

Cut the tube to your preferred length.
After each outing, rinse and dry the water bladder. 
To make it easier, use the cleaning kit with the bottle brush and a drying hanger (reference number: 5935596). 

Stay hydrated.

The format of this hydration backpack is specially designed for mountain biking rides of up to 2 hours.

4-litre volume for pockets: Ideal for carrying everything you need without overloading your back.

A light and compact bag:

We’ve chosen fabrics that are comfortable to carry on your mountain biking rides.

- Foam on the back and straps.
- Highly breathable mesh fabric wicks perspiration from the back and straps.

Comfort and breathability:

Fill your water bladder, insert it, and secure it using the hook—it’s that easy.

Side straps allow you to adjust the fit of your bag.

The result? Your bag stays in place and allows you to forget about it as you ride.

Easy to use:

2 L (1 3/4 qt.) volume so you can mountain bike for around 3 hours without needing to top up.

Easy to fill and clean with the sliding system.

Easy to care for

The mouthpiece has an on/off switch so that it won’t drip.

Easy hydration

Accessible silicone mouthpiece that’s comfortable to use when you’re on the go.

Mouth comfort

This new water bladder has been lab tested for flexibility and robustness.

Puncture resistance

Designed so that more than 80% of breakages are repairable.

Eco-design

Designed so you can hydrate easily during mountain bike rides lasting around 3 hours.

This 2 L (1 3/4 qt.) water bladder is compatible with the following hydration backpacks:
EXPL 7L mountain biking hydration backpack (ref. 8644841, 8644842, 8644843, 8644844, 8644845)
ST 900 mountain biking hydration backpack (ref. 8300158)
XC Light mountain biking hydration backpack (ref. 8528735)

Compatibility

The 2-litre (1 3/4 qt.) capacity means your water bladder will give you hydration for around 3 hours of riding. 

It’s quick to fill because of its wide opening. When closing it, make sure the slider clips into place to ensure that it won't leak.

Ride with peace of mind

You can cut the tube to the most convenient length for you. 
Remove the bite valve, place the tube in hot water to soften it, cut it to the desired length, and put the bite valve back on.

The bite valve locks (rotates 180°) to prevent leaks when not in use. It won’t drip, even in the open position. To get a good flow when drinking, gently bite the valve and suck.

Adjustable tube and valve for increased comfort.

The materials used to make this water bladder are guaranteed to be free of bisphenol A (BPA).

It measures 35.5 x 17 cm (14" x 7"), with a 100-cm (40") tube.

To make your water bladder last longer, we recommend not folding it, not filling it with hot liquids and not carrying it upside down or by its tube ;)

Composition, dimensions, and care

To improve water flow and stop the water sloshing around inside the bladder during your ride, we recommend releasing any air before you set off!

Once filled, just turn the hydration bladder upside down, direct the air bubbles toward the tube opening, and suck them out. And hey presto, you can now drink quickly and quietly as you ride!

Removing the air


To avoid a plastic taste when drinking, rinse the product three times before first use. We recommend cleaning it after every ride using the cleaning kit (product ref. 5935596). 
After cleaning, leave the hydration bladder upside down and open to dry thoroughly.

If it still has a plastic taste, place the dry hydration bladder in the freezer for one night.

How to clean your water bladder

To check this water bladder's quality, we've tested it thoroughly in our in-house lab.
Besides spotting no defects during our burst / high pressure tests, we noted an increase in puncture resistance of more than 74%.The water bladder is made in France, which means we can closely monitor production quality (for watertightness and sturdiness over time).

Tested, approved, and made in France!

Check out our support page to make your water bladder last longer.

Clean the bladder and hose using the drying hanger and three brushes.

Keep your hydration reservoir and drinking tube fresh and clean with this easy to use three-brush set and one drying hanger.

The semi-rigid flask is easy to fill and clean.

There’s a separate zippered pocket for your keys, money, phone, snack bars, etc.

The centre of the back and the straps are lined with a breathable material.

The unisex compatible straps and chest strap can be moved up and down.

The semi-rigid flask’s cap makes it easy to fill and clean.

Designed to keep you hydrated on mountain bike rides lasting up to 1.5 hours. It contains a 1 L semi-rigid flask.

This hydration backpack has 2 litres of bag space and a 1-litre semi-rigid flask for short mountain bike rides lasting around 2 hours.
The adjustable chest strap keeps the bag in place on your shoulders. 
The zippered pocket on the front is perfect for holding your phone, money, keys, or snack bars.
It’s very light and comfortable to wear, as the back and straps are lined with foam and breathable mesh fabric.
Practical: The straps include a sunglasses hook.

Bag details

The design of the semi-rigid flask is inspired by water bottles.
It has a screw cap and is marked so you can easily fill it to the desired level, up to 1 litre of water.

Unlike standard thermobonded water bladders, the walls are separated and help any remaining water drain (from top to bottom) out at the end.

This means no water remains in the flask, eliminating odours.

A really practical flask

Access the main compartment from the top. The semi-rigid flask is on a hook so it won’t drop to the bottom of the bag. 
You can store your money, keys, phone, snack bars, and tissues in the zippered front pocket. 
The reflective strip on the front of the bag shows where the pocket is.

Carry all your things

Clean your flask after each use. 

To help you clean out the tube, you can order a special brush (product ref. 5935596). 
This kit comes with a hanger to make it easier to dry out the inside of the bladder.
Tip: If the plastic taste lingers, place the flask in the freezer for one night. 
Take it out a few hours before your ride. This will remove the plastic taste.

A product’s environmental impact is calculated based on its entire life cycle using various indicators.
An ABCDE rating shows the environmental impact of a product. Put forward by ADEME, it takes into account production, transportation, usage, and waste generated at the end of a product’s life.
Decathlon displays this information voluntarily to help you identify products with lower environmental impact.Learn more at: sustainability.decathlon.com

Our products’ environmental impact 

Type of bag: Hydration backpack 
Volume: 2 L 
Water volume: 1 L 
Flask included 
1 chest strap 
Water-repellent

A very practical bag

1 L (1 qt.) volume so you can mountain bike for around 2 hours without needing to top up.

Designed so you can hydrate easily during mountain bike rides lasting around 2 hours.

This 1 L (1 qt.) water bladder is compatible with the following hydration backpacks:
ST 500 mountain biking hydration backpack (ref. 8300156 )
EXPL 7 L (6 qt.) mountain biking hydration backpack (ref. 8644841, 8644842, 8644843, 8644844, 8644845)
XC Light mountain biking hydration backpack (ref. 8528735)

With its 1-litre (1 qt.) capacity, your water bladder will last you around 2 hours of riding. 
It’s quick to fill because of its wide opening. When closing it, make sure the slider clips into place to ensure that it won't leak.

The materials used to make this water bladder are guaranteed to be free of bisphenol A (BPA).

It measures 31 x 16 cm (12" x 6"), with a 100-cm (40") tube.

To make your water bladder last longer, we recommend not folding it, not filling it with hot liquids and not carrying it upside down or by its tube ;)

2 L (1/2 gal) water bladder, 7 L (2 gal) bag volume 

The hose no longer crosses over the chest. Bite valve is easy to rotate.

6 inside pockets and 3 sealable outside pockets + 1 outer net. 

The back is made of 3D foam. Ergonomic mesh straps for ventilation.

Shoulder straps suitable for men and women. Adjustable chest strap. Waist strap.

The fabric is water-repellent to withstand muddy splashes.

Designed to keep you hydrated for mountain biking rides lasting up to 3 hours. It has a built-in 2 L (1/2 gal) water bladder and 7 L (2 gal) of bag space.

Type of bag: Hydration backpack 
Volume: 7 L (2 gal)
Volume of water: 2 L (1/2 gal)
Water bladder with fastening strip, hose and bite valve included
6 inside pockets or nets
3 sealable outside pockets for easy access without removing the bag
1 outside net for gloves, a compact or windproof jacket
1 outside loop for glasses
1 outside helmet clip
1 insert for clip-on LED rear light
1 chest strap
1 waist strap
Water-repellent

In a nutshell

With its 2 L (1/2 gal) capacity, water bladder will keep you hydrated for about 3 hours.Has wide opening for easy filling.
When closing, make sure the slider clips firmly into place to avoid leaks.Tested in the laboratory and made in France, its puncture resistance has been improved by 74%.

A large water bladder, sturdy and made in France.

Before leaving, squeeze the air out after filling to increase flow rate of drink. 
Turn water bladder upside down, direct air bubbles towards the tube opening, and suck them out. 
The mouthpiece is lockable (rotates 180°) to prevent leaks when not used. It won’t drip, even in the open position. To drink, gently bite the mouthpiece and suck in! 

Getting good flow

2 sealable side pockets (telephone, cereal bars & tissues) & 1 pocket (multitool) underneath the bag for direct access.
With 6 inside pockets, everything else finds its place (documents, keys, tyre lever, repair essentials, pump and water chamber).

The net on the outside can be used for gloves or a waterproof jacket. Also clips on the outside to attach your helmet, glasses, and a rear LED clip-on light.

To improve durability of bag, we recommend waterproofing it. Even though the fabric is already water-repellent, extra waterproofing will stop mud from getting caked into it. 

After each ride, wash and dry your water bladder using the cleaning kit (product ref. 5935596). 
To avoid plastic taste,  put dry water bladder in  freezer. This will remove the plastic taste.

Dying fabric requires soaking it in large amounts of water.  


2-tone

Consult our water bladder support page to make your water bladder last longer.

Extend the product's lifespan

Harness system to prevent unwanted movement during XC rides

4 zip pockets, including 2 pockets you can easily access on the go. 

Perforated foam back and mesh straps to let perspiration escape.

Moisture management

Hydration tube guide to make it easier to drink during your ride.

System adapts to different body shapes. 
Adapts to sizes S to XL

Adjustable

Designed for staying hydrated easily and safely while training and doing XC races

Number of Compartments

Entirely designed and developed, from initial sketch to final model, in France at the B'Twin Village (Lille), this hydration pack is the work of an expert team of passionate cross-country mountain bikers.

 The Rockrider team, together with its team of test riders, has designed and tested this XC Lite hydration pack in extreme conditions to offer the perfect hydration backpack for XC rides: lightweight, stable, and easy to access.

THE STORY BEHIND THE XC LITE HYDRATION BACKPACK

We have created a new fastening system that gives cross-country users the best possible fit, even on rough terrain.

The harness system, shock-absorber straps and shape keep the bag very stable, even when the water bladder is empty.

HARNESS SYSTEM

We have designed this XC Lite hydration backpack with front pockets made of elastic mesh that provide quick access to your snacks while riding.  
The total volume of the bag is 2.5 L.

The straps can be tucked under the pockets to stop them from moving around and bothering you.

There is a back pocket for storing your tools and other accessories safely.

Pockets

3 L (2 1/5 qt.) volume so you can mountain bike for around 4 hours without needing to top up.

So you can drink easily on mountain bike rides that last around 4 hours.

This 3 L (2 1/2 qt.) water bladder is compatible with the ST 900 mountain biking hydration backpack (ref. 8300158 )

With a 3-litre (2 1/2 qt.) capacity, your water bladder will last you around 4 hours. 
It’s quick to fill because of its wide opening. When closing it, make sure the slider clips into place to ensure that it won't leak.

The materials used to make this water bladder are guaranteed to be free of bisphenol A (BPA).

It measures 40 x 19.3 cm (16" x 7 1/2"), 100-cm (40") tube.

To make your water bladder last longer, we recommend not folding it, not filling it with hot liquids and not carrying it upside down or by its tube ;)

Limits taste and odour

100% waterproof with the mouthpiece closed, non-drip with mouthpiece open.

Ergonomic shape and soft material make it easy to drink as you ride.

Ergonomic grip

Comfortable mouthpiece made of soft elastomer.

Clear body graduated for easier intake monitoring.

Precision

The elastomer cap won’t slip off and makes closing the bottle easy.

Traction

Compatible with all bottle cages on the market.

Developed for demanding cyclists who want a bottle that keeps them hydrated as they ride.

Volume (ml)

isothermal

Cap Type

Container Type

All of our "FastFlow" bottles use the SureSnap® valve, the best on the market. This valve controls the flow of water effectively and precisely. When you press down, water squirts out of the mouthpiece.
Plus, the anti-leak mouthpiece can stay open while riding without water dripping onto your bike's frame.

SureSnap® valve

The mouthpiece is 100% watertight in closed position. Use this position for mixing the isotonic drink in the bottle or for carrying it in a bag.
Once on your bike, leave it open. The SureSnap® valve prevent leaks. Drink quickly and safely!

How to use the FastFlow valve

There’s nothing worse than a plasticky taste or smell in a water bottle. But this is the case for most cycling water bottles. 
We tested numerous plastics before finding just the right one, which is supple and has a neutral taste and smell. When blind tested against bottles from other leading brands, ours were the most neutral-tasting.

No more plasticky smell or taste.

Clean the water bottle thoroughly after each use. If you use isotonic drinks, rinse all parts of the bottle, cap, and mouthpiece to make sure there is no liquid remaining inside. Use liquid detergent and a long brush to clean the bottom of the bottle. 
Dry well and store with the cap off. Otherwise, mould could develop in the bottle.
Do not put in the dishwasher (particularly above 70°C).

How to care for your water bottle

The bite valve is ergonomic. The 45° angle makes it easier to bite.

The valve locks to prevent leaks when not in use.

Locking mechanism

This bite valve replaces the one on your hydration bladder.

Volume

After each use, rinse well and don’t let water stagnate inside.

Sports/

Cycling/

Bike Accessories/

Hydration/

btwin

Hydration Bladder Bite Valve