Waterproof coating 5,000 mm (Schmerbers) | Taped seams

Waterproof

Protects against winds of up to 70 km/h (43 mph). 

Windproof

Hydrophilic coating (RET = 12): Reduces condensation under coating.

Breathability

When folded, the jacket fits into its own pocket.

Easy transport

This jacket is designed to keep you dry when walking in light rain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Duration

Frequency

Weight (g)

Number of Pockets

Precipitation

Weather Conditions

sleeve length

Pack

Pocket

type of waterproofing

breathability (in RET)

Type of Length

Hood

Style

Zipper Type

Schmerber

Tightening Type

Fastener Type

Main Material

The waterproofing of a fabric is measured in Schmerbers or mm of water (pressure of a water column). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water (Schmerbers) before washing (equivalent to the pressure exerted by a 5,000 mm column of water).

Water resistance of the fabric

The fabric of our product is very breathable -12 RET.
Component breathability is measured by its thermal evaporative resistance (RET). This refers to its capacity to release perspiration during activity. The lower the RET, the more breathable the fabric. 
RET ≤ 9: extremely breathable fabric;
RET ≤ 12: breathable fabric
RET ≤ 20: breathable fabric
RET ≤ 20: little or non-breathable fabric

Fabric breathability

To maintain water repellency, we recommend regular reactivation.
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric:
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain your jacket’s waterproof coating

This rain jacket was designed for a 2-hour hike at a maximum speed of 5 km/h (3 mph), with no ascent.
How much you perspire depends on the intensity and duration of your physical activity.If the fabric is not breathable enough for your activity, perspiration will condense inside the jacket,and you feel damp.This moisture is not rain soaking through the shell, but condensation caused by perspiration.You need to choose a rain jacket for your type of physical activity.

Choose your waterproof jacket according to the intensity of your activity. 

Men's Hiking Jackets

Double-sided microfleece. 200 g/m² density for optimal warmth. High collar.

Warmth

Polyester knit: lets the body's moisture pass through (RET=6.3). 
Full zipper.

Lightweight

Pockets

Machine washable at 30°C, quick drying, and crease-resistant.

Ease of Maintenance 

A zippered fleece jacket that will become your child's best friend for staying warm on outdoor excursions. 

pattern

Collar Type

Customization

A warm fleece is good, but a warm, stylish fleece is even better! This fashionable fleece has a colour block look your child will love. We also added 2 zippered pockets for kids to store small items safely. 

Your child will love this fleece 

Your kids need to stay warm during their outdoor activities. With this fleece, there's no need to worry. The fleece fabric traps air, creating an insulating barrier.

A fleece that parents will love

If their clothes are not breathable, kids can quickly get too hot when they’re playing. We selected a breathable fabric that wicks away moisture even at high activity levels so this fleece jacket remains comfortable.

A comfortable fleece for high-intensity exercise

The breathability of a fabric is measured by its evaporative resistance or RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET < 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET of 6.3.

What is the RET index?

This fleece is available in the following sizes: 
- Age 7-8 
- Age 8-9 
- Age 10-11 
- Age 12-13 
- Age 14-15 

What sizes are available?

Wash the fleece at 30°C on a synthetics cycle to avoid damaging it. Wash it inside out with the pockets closed. To protect the fabric, do not exceed a 1,000 rpm spin speed. Do not tumble dry.

How should I care for this zippered fleece? 

Kids' hiking shirts

Zipper at the bottom of the legs makes them easier to put on with shoes.

Easy dressing

Anatomic design

Hydrophilic coating (RET = 12): reduces condensation in the garment.

Lightweight, compact top-layer pants | Weight: 200 g (7 oz.) in size L 

Designed for occasional hikes on easy trails in rainy conditions.  

reinforced area

belt height

Place of Practice

modular

Type of Bell

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water pressure (Schmerbers) before washing (equivalent to the pressure exerted by a 5-metre column of water).

Water resistance (fabric)

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric’s resistance, the more perspiration can escape, and the higher the fabric’s breathability. 
RET < 9: extremely breathable fabric
RET < 12: very breathable fabric
RET < 20: breathable fabric
RET > 20: little or non-breathable fabric.

The fabric for this jacket is water-repellent: water slides off its surface. In this way, the fabric doesn’t soak up water and stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Our water-repellent coatings are now perfluorocarbon-free. As a result, this model will be sold with a more environmentally friendly water-repellent treatment.

Your health is our top priority

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain waterproofing over time

How much you perspire depends on the intensity and duration of your physical activity.If the fabric isn’t breathable enough for the type of activity/exercise, your perspiration will condense inside the item.The jacket will feel damp inside. This dampness is not rain soaking through but condensation caused by perspiration. This means you need to choose top-layer pants suitable for your activity.This product is designed for 2-hour hikes at no more than 5 km/h (3 mph).

Choosing waterproof rain pants based on physical effort

For full-body protection from the wind and rain, we recommend the Raincut 1/2 zipper or full zipper men’s jackets.   

Other recommended products

Men's Hiking Pants

100% anti-UV. Pink/purple lens for sunny and cloudy weather.

Sun protection

contrast improvement

Field of vision

40 mm wide elastic with double non-slip silicone strap.

Stability

Can accommodate eyewear with maximum frame width of 140 mm.

Compatibility

Optimal anti-fog, dual lens, and ventilated frame.

Anti-fogging

Double-density ergonomic foam and comfortable fabric.

User comfort

2 buckles to adjust the length of the elastic

Adjustable

With their high definition lens and cylindrical shape, these comfortable ski goggles offer excellent visibility and a wide field of vision. 

Condition

Strap Type

Skill Level

Technical Lens

Season

Compatible with prescription glasses

Field of Vision

strapping

fogging treatment

Glass Category

anti-uv

With Case

Diving Mask Type

The 900 HD cylindrical ski goggles have an HD lens that offers excellent optical quality and improves contrast.
It also provides a good field of vision and combines well with Wedze helmets.
You can unclip the lens from the frame either to replace the original lens or to insert a bad weather lens (sold separately). Or even for a spherical shape.

Experience

This lens features HD technology for excellent quality of vision. HD optical quality enhances the most vivid contrasts on your playgrounds.


HD optical quality (high definition)

UV rays are bad for the eyes. All our goggles are certified 100% anti-UV. Ski goggles offer the best protection: they fully enclose your eyes and block UV rays and glare.

100% UV protection

The fine weather lens (which can be used to replace the original lens) and bad weather lens (very light colour so you can see better on overcast days) are sold separately.

Repairable/Interchangeable

The "Optimal" anti-fogging system comprises a double ventilated lens with treated inner surface and an air vent on the frame that ventilates the inside of the ski goggles.
For good ventilation inside your goggles, do not obstruct these air vents (with a neck warmer, for example).
Do not rub the inner surface of the lens. Instead, dab it carefully to preserve the anti-fogging treatment for as long as possible.

Optimal anti-fogging

A coloured coating on the outer side of the ski goggles lens (known as coloured Flash) reduces the percentage of light that reaches the eye, reducing glare and improving clarity in sunny conditions.
Please note that the Flash lenses are sensitive to scratches, remember to protect them.

Coloured Flash lens

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Ski helmet compatibility

The 900 HD is sold without packaging. Choose the best product from our range for transporting/storing your goggles.

Protection

Our size L ski goggles can be worn with prescription glasses (maximum width of 140 mm). The foam on the sides and the shape of the goggle skirt leave room for each temple. For comfort, we strongly recommend trying your glasses under the goggles before purchase.

Compatibility with prescription glasses

Moisture causes fogging. Keep the foam as dry as possible. For example, do not place the goggles on a wet helmet or a hat. Always dry your ski goggles properly overnight to get rid of all the moisture so you can hit the slopes the next day with completely dry goggles. Never wipe/rub the inner lens to avoid removing the anti-fog treatment, simply dab it.

Avoid fogging

Chose your size according to your head size. Up to 55 cm (21.7 in) choose size S, from 56 cm (22.1 in) up choose size L.

Size selection

Kids' Ski & Snowboard Goggles

Complies with EN1077:2007 standard (class B). ABS construction for strength.

Impact protection

Ventilation

Adjustment dial that goes around the entire head.

Goggles locked with 2 tab fasteners built into the helmet

Ease of use

Recessed ear protectors prevent ear compression

A ski helmet for young intermediate-level skiers looking for excellent support and optimal comfort for long days on the slopes.

Adjustable Helmet

Intensity

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

RECCO system

Detachable Visor

Loft

The adjustment dial is key to keeping your child’s helmet secure. The dial allows for easy and precise adjustments, even with gloves on. It also provides maximum comfort and safety. Turn the dial to the right to tighten and to the left to loosen.

Adjustment wheel

The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. We recommend changing your kid's ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.

ABS structure

The European standard EN 1077:2007 applies to helmets used for cranial protection during downhill skiing and snowboarding. The standards test the helmet’s ability to absorb shocks and resist perforation. The two categories are:
- Class A: Protects the top and back of the head as well as the ears and side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Measure your head circumference (from the middle of the forehead and above the ears) and choose the right size. When trying it on, there should be no discomfort. If it has no visor, try the helmet with the mask: there should be no gap between the two.

How do you choose the right size?

For your kid’s safety, your ski helmet must be properly adjusted:
- The head size can be adjusted using the tightening wheel.
- The chinstrap must be properly adjusted. They must be able to fit 2 fingers between the strap and their skin. If fitted incorrectly, the helmet will offer less protection.

Adjust your helmet once you have the right size

We recommend changing your ski helmet every 5 years, unless it has sustained a significant impact in the meantime. In case of severe impact, you need to change the helmet: even if you can’t see it, the inner material may be damaged and your helmet will offer less protection.

When to change your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, choose a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: you don't need to wear a hat underneath – in fact, it’s best not to

Make sure this product is suitable before buying. If it doesn’t fit, you can return it subject to the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. It can be refurbished. 

Return conditions specific to personal protective equipment

Helmets

Lightweight and compressible. Fits easily inside a pocket or backpack.

Compact design

This fleece neck-warmer is designed to keep your kids warm this winter.

type of lining

Reversible

Kids' Ski Clothing

Component encourages wicking and minimal drying.

Moisture management

This ski undergarment is designed for little skiers. It will keep them warm for a great day of skiing this winter.

The BL 100 Base Layer has a regular cut.
It is a classic straight cut that adapts to a wide variety of body shapes.

How does the 100 base layer top fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive and offers excellent performance in various respects, and especially because the fibres can be knitted to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.
Its ability to reduce odours is limited.

What are the benefits of polyester?

To make sure you stay warm and dry, we recommend using the “three technical layers” rule:  Layer 1: a second skin, to stay dry. Layer 2: an insulating layer that keeps the heat in. Layer 3: a protective layer that protects against the elements.

How to dress your children so they keep warm on the slopes

We commit to repairing your product free of charge for the duration of the warranty. If you need seams, zippers, or another element repaired, contact your store. 
However, if we can’t repair your product due to a production defect, we will exchange it or reimburse you.

This product is repairable

This ski base layer was developed for kids. It will keep them warm on the slopes.

The BL 100 Base Layer Bottoms have a regular fit.
The classic straight cut adapts to a wide variety of body shapes.

How do the BL 100 Base Layer Bottoms fit?

Polyester is the most-used fibre for base garments because it is relatively inexpensive, offers excellent performance, and can be knit to obtain a very lightweight and durable fabric. It actively absorbs moisture but does not dry particularly well when wet.


clearance

Flexibility

For use on cold, hard floors during school sports or low-impact gymnastics, opt for canvas shoes with insulating soles. Artistic gymnastics shoes are ideal for extra comfort.
For artistic gymnastics, you need to be able to feel the floor or apparatus underneath your feet. This is why gym shoes with a supple microfibre sole are best.
For rhythmic gymnastics, toe shoes are the best option.

Sports/

Fitness & Combat sports/

Artistic & Rhythmic Gymnastics/

Artistic Gymnastics/

domyos

500 artistic gymnastics shoes - Kids