clearance

with 700 diameter tires, 23 to 32 mm cross-section. ETRTO 23/32 – 622

Compatibility

Optimized composition to guarantee your inner tube has a good seal.

Waterproof

Designed for replacing the inner tube of your 700 diameter, 23 to 32 section tires with a 48 mm (2") Presta valve.

Tire Assembly

Valve Type

Frequency

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 27.5 x 1.90 means a tire with a 27.5" diameter that is 1.90" wide.
The dimensions in mm are also on the tire sidewall.
For example, 50-584 means your tire is 50 mm wide with an inner diameter of 584 mm (approx. 27.5 x 2.00).

How to choose your inner tube

Remove the old inner tube using a tire lever.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition and position of your rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Weight:

Bike Tubes & Valves

Replaces the chain of your 3- to 8-speed bike. Compatible with 3- to 8-speed Shimano, Campagnolo and SRAM derailleurs

Condition

Intensity

Number of Speeds

Number of Links

Main Material

For easy assembly, adapt chain length with a chain tool available on our website (ref: 8351521)

Mounting

For easy dismanteling, use a quick link chain tool and/or a chain tool available on our website (ref: 8352339 and 8351521)

Dismantling

Number of links

Bike Chains

Considerably improves comfort thanks to its memory foam coating.

User comfort

Thanks to the adjustable strap that fits all saddles (max. 17.5 cm)

Ease of use

Designed for occasional cycling on short trips

Skill Level

This product comes in 3 different sizes.
Size M: Suitable for saddles with a maximum width of 14 cm
Size L: Suitable for saddles with a maximum width of 17.5 cm
Size L: Suitable for saddles with a maximum width of 22 cm

Size:

Bike Saddles

Adjustable

Attaches using a 17 mm flat spanner or 8 mm Allen key.

Easy assembly/dismantling

Designed for parking a bike weighing no more than 25 kg (including baggage).

Weight (g)

Assembly Type

Position

removable

Foldable

Maximum Load

Attachment

Attachment Type

Item Weight

Attaches near the chainset. A central plate provided for bikes without screw holes (sold with the product).

Where does it mount onto your bike?

Given the variety of bikes, frame shapes, and bottom bracket heights, we recommend asking our sales assistants for help.

What kind of bike is it for?

Bike Kickstand

Capacity

Secured with 2 straps and a rear loop for the cargo cage connector

Stability

Designed for bikepacking adventures on demanding terrain and in rainy weather conditions

Volume (L)

Height (cm)

reflective

Volume

Its dimensions and slightly flared shape make it the perfect home for your Forclaz MT 500 1-person (84927222) and 2-person camping pan (8492723)

Compartments

Watertight bag with roll-up fastening and welded assembly, offering extra protection against water.Tested according to the IPX6 standard, it withstands powerful jets of water (100 L/min) from all directions.

Water resistance

Everything is held in place by the 2 sturdy nylon straps and the exclusive strap loop at the back, which is compatible with the cargo cage connector.8669960)

Main component: Solution-dyed PU coated,TPU laminated 600D polyester
Rear and roll top reinforcement:Solution-dyed PU coated,TPU laminated recycled polyester ripstop

Material/component

Weight

2 nylon straps (included) and quick clip fastening

Fastening/Attachment

Roll-up fastening.Three turns are necessary for a perfect watertight seal.

Zip/Fastening

Compatible with the cargo cage (ref:8669960).
Cargo cage not included. 
Do not use directly on the fork without a cargo cage.

Reflective strips to be visible at night.

Visibility

We do our utmost to use the least abrasive materials possible and design products that offer optimum stability. However, friction can sometimes occur between the bag or harness and the frame of your bike.To protect your frame and avoid possible abrasion, we strongly recommend that you apply protective stickers to the contact areas.

PRECAUTIONS FOR USE

Bike Bags & Backpacks

1 main pocket, 1 inside mesh pocket, 1 outside mesh pocket.

Multiple compartments

Carry your belongings on your handlebar using this bag, which is designed for trail rides in good weather.

- 1 large main pocket
- 1 inside mesh pocket
- 1 outside mesh pocket

Storage:

Fixes to any type of handlebar. 
Strap for attaching it to the head tube so it’s even more stable. 

A handlebar bag that attaches to any bike.

This bag is stitched and made from fabric, so it is not waterproof. If you want a waterproof bag, then get our IPX6 handlebar bag (8579466).

Is this handlebar bag waterproof?

Length: 24 cm / 9.45 inches
Diameter: 11 cm / 4.33 inches
Weight: 144 g / 0.317 lb

Weight and dimensions

Security rating: 1 out of 10.
Not designed to protect your bike from theft.

Durability

Usable length: 100 cm (39.4").
Perfect for securing accessories.

Lightweight

Designed to protect your everyday belongings against theft. 

Lock type

Bike Lock Type

Certification

Length (cm)

Bike Safety

Contrary to popular belief, tamper-proof locks do not exist.
Bike locks are intended to act as a deterrent, making it more complicated to steal a bike.

A good lock has an anti-pick locking mechanism and is made from materials that can only be cut or broken with special tools, which makes theft more difficult.

Safety

The security rating helps you choose the lock that’s best for your use. Btwin and third-party laboratory CNPP created a test protocol based on real-life theft techniques.
This unique protocol assigns each lock a rating from 0 to 10 that indicates how theft-resistant it is.

Security rating

Locks

onlyonline

The 2 x 20-litre volume expands to 2 x 23 litres. Maximum load: 20 kg (31 lbs).

Water-repellent, rain-resistant fabric. Non-watertight seams.

Quickly clips onto any pannier rack and stays.

Rolltop fastening so that you can get more the volume if you need.

Easy opening/closing

Double pannier bag that can be split to suit your daily needs.

Flexibility

360° reflective strips and clip light mounting point.

Can be locked to your pannier rack with a padlock (sold separately).

Bike safety

Keep your everyday items dry on your bike’s pannier rack with this large bag.

Bag Type

modular

With Handle

Panier Type

Number of Compartments

Fastener Type

Ideal for daily urban commutes and carrying your shopping and everyday items.
It is not suitable for touring or for use on unsealed paths.
Ensure the weight on either side does not exceed 10 kg.

What type of cycling is this bag designed for?

It’s now easy to tailor your bag to meet your changing needs.
In just one simple motion, switch from one bag to two if you need to carry more.
The rolltop also opens to increase the volume by up to 3 litres on each side while keeping everything secure inside your bag.

A bag that meets your changing needs

Want to carry bottles or a D-lock without them moving around or banging together? Use the elastic bands inside the bag to secure up to six bottles or other items.
You can also keep your pannier bags flat when not using them.

A clever bag

This double bag works with pannier racks with tubes with a diameter of between 8 and 16 mm.
These pannier bags are also compatible with our own-brand pannier racks, available in stores and online.
The rip-tabs to hold the bag securely in place and prevents it from falling off.
The strap at the bottom of the bag makes it more stable as you ride. You can adjust the width so that it fits as many different bike and pannier racks as possible.

Pannier rack compatibility

Don’t want to leave your bags unattended on your bike?
With Our system you can lock either one or both bags to your pannier rack with just one padlock (sold separately) to keep thieves away.

A bag that locks to your pannier rack.

This bag has a reflective strip so that you can be visibile from every side.
It has a mounting point that is compatible with our clip lights.

Be more visible

Wash the bag with soapy water. Never use detergent, alcohol, or any product that could damage the fabric.

Caring for your pannier bags

Height (cm): 34
Width (cm): 34 cm [13 1/2”]
Depth (cm): 17 (6 2/3”)
Distance between hooks (cm): 9 (2”)

Weight: 2.1 kg (4 lbs).

Dimensions

Stamped anodised 6061 aluminum. Can carry loads of 4 kg (9 lbs).

Robustness

Exclusive connector at the top for attaching a waterproof bag (8669980).

3 screws. 3 strap loops (straps sold separately).

Compatible with the fork bag (8669980) and Voile straps.

Light and durable, it's designed  to carry a fork bag.

Stamped anodised 6061 aluminum. A digital simulation assessed how to remove material to achieve a weight of less than 100 g (3 1/2 oz.) and a load capacity of 4 kg (9 lbs). The base of the cargo cage is welded to stop it becoming deformed.

Combo of durability and low weight

The exclusive connector at the top of the cargo cage holds your Riverside fork bag (8669980) in position as you fix it to the cage. It also keeps everything in place when riding over rugged terrain.

Exclusive positioning connector

9 holes for fixing it to any standard bottle cage eyelets. For the most secure fit, we recommend using 3 screws.

Universal mount

Perfectly fits the bikepacking fork bag (8669980). For gravel biking, bike touring, and trail riding.

96 g (3 oz.)
Dimensions: 20 cm (8") long / 8.5 cm (3") wide
Comes with 3 screws and 3 rubber washers

Features

Warranty

For all types of V-Brake callipers, on any type of bike.

Abrasion resistance

Versatility

Easy adjustment with the adjustment spacers.

Brake Type

Weather Conditions

Braking Surface

Bike Brakes

Vol: 0.6 L (1/2 qt.). Can carry a spare inner tube, tire levers, patch kit, etc.

Easily secures to 2 spots (saddle and seat post) with hook and loop bands.

Zipper closure for easy access to your belongings, even when on the saddle.

Specifically positioned to accommodate a light.

Designed for carrying the essentials you need for bike repairs and a few small items.

Volume (ml)

Style

This bag can typically hold:
- One 700x35-45 inner tube + 2 tire levers + 1 multi tool + repair kit with patches + spanner set + debit card
OR
- Two 700x25-35 inner tubes + 2 tire levers + 1 multi tool + two 16 g (1/2 oz.) C02 cartridges + inflation valve
OR
- One 27.5”x1.9-2.5 + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve
OR
- One 29”x1.7-2.2 inner tube + 2 tire levers + 1 multi tool + two 20 g (7/10 oz.) C02 cartridges + inflation valve

This saddle bag is also available in a larger 1 L [1 qt.] size (ref. 8569836)

Available in 2 sizes

Increase your visibility with the reflective version of this bag (ref. 8753772).

Also available as a reflective version

80dB.The brass body creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm handlebars (one of the most widely used)

We have designed this fantastic classic bell so you can be heard as you ride through town!

Assemble With Tools But Without Tools Provided

Bike's Bells

Compatible with all brands and kinds of bikes.

Replacement derailleur cable for your bike (mountain, road, hybrid, or city).

Length (mm)

Derailleur Position

Length: 2.27 m (2 1/2 yd)
Diameter:  1.1 mm (1 1/5 yd)

Sports/

Cycling/

Bike Tools and Components/

Bike Parts & Components/

Bike Handles & Grips/

decathlon

City 100 Grips