onlyonline

Protects the blades from bumps and from the rest of your equipment.

Impact protection

Stretchy to make them easy to put on and take off. 

Easy dressing

Available in 2 sizes to fit all lengths of blades.

Adjustable

Designed for protecting your ice skate blades during transport and storage.

Condition

Practice Conditions

Skill Level

climbing shoes flexibility

When

Tightening Type

Place of Practice

Main Material

Keep your blades sharp by protecting them from impacts and rust.

Sharpness

Hockey Skates

Protect your skate blades when walking on hard surfaces. 

Compatible with adult and kids’ shoe sizes.

Ease of use

Blade covers to protect your skates off the ice.

Frequency

These blade covers are uniquely designed to protect your skate blades when walking off-ice.
We recommend using skate soakers to absorb moisture and prevent rusting when transporting and storing your skates.

Skate maintenance

Moisture absorption

Thick fabric for drying your skates safely.

Very compact, light, easy-to-carry microfibre towel.

Compact design

Machine-washable. Does not tear. Withstands repeated washing.

Easy maintenance

Microfibre towel that dries quickly after use.

Quick drying

Designed for wiping the blades of your skates at the end of each session.

Maximum washing temperature 30°C. Normal cycle.

touch

Style

Width

Length (cm)

Grammage

20 L capacity: suitable for skates up to size 6.

Volume

The bottom of the bag has a waterproof coating.

Waterproof

Store your skates in two separate pockets to protect them better.

Multiple compartments

A bag for cleaning, transporting and storing your ice skates. 

Number of Pockets

Type of Cover

Pocket

Foldable

Number of Compartments

Fastener Type

- Protect, dry and clean your skate blades with the accessories included
- Towel and blade guard made from absorbent fabric

Maintaining your blades

Carry your bag however you like: by the handle, over your shoulder or across your body.
The strap can be adjusted and secured with a clip.

Multiple ways to carry your skate bag

Adults' Ice Skates

Foam handle for comfortable hold of the ice skating trainer.

User comfort

Adjust the height to 6 positions using the clip button.

Easy to store and transport. Folding frame construction.

This ice skating trainer is designed to help your child take their first steps on the ice.

Sportsperson’S Weight

We recommend using the following safety precautions: helmet, elbow pads, knee pads and wrist guards.
Must be used under the supervision of an adult.
Assemble the ice skating trainer according to the instructions.

What safety precautions should you take?

Ice Skates Accessories

25 L capacity: suitable for skate sizes W5,5/M4 to M13.

Capacity

A bag for cleaning, carrying and storing your ice skates.

clearance

Height and depth adjustable with the 3D knob. Ponytail hole. 

Weight

This helmet is designed to keep you safe when in-line skating, skateboarding, or scootering.

Adjustable Helmet

Intensity

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Adjustment Dial

Detachable Visor

Helmets are designed to protect your head from a single impact. If you fall, you should replace the helmet even if there are no signs of damage: it may be weakened or cracked in an area you can’t see, and no longer provide adequate protection.
We recommend replacing your helmet every 5 years. Some of its components begin to age at this point, especially if stored in a cold or wet place. Manufacturing dates are printed inside the helmet. 

When should you replace a helmet? 

Full-coverage model suited to skating on asphalt (neck and ear protection). Polystyrene structure and ABS outer shell. Complies with European standard EN 1078. 

Impact Protection 

Oxelo replacement foam kits are available to replace the foam in your helmet (product ref. 8607937). 

Replacement Foam 

Three sizes: S = 52–55 cm (20.5–21.7 in) 340 g (12 oz), M = 55–59 cm (21.7–23.2 in) 400 g (14.1 oz), L = 59–62 cm (23.2–24.4 in) 455 g (16.1 oz). 

Helmet Sizes and Weights 

European standard defines the manufacturing and testing criteria for helmets used in sports like cycling, skateboarding, and inline skating. The corresponding test requirements and methods cover the following aspects: construction (including field of vision), restraint systems (including chin straps and tightening devices), and manufacturer markings and information. 

Certified compliant with standard EN 1078 

Helmets are personal protective equipment (PPE).
Make sure that you are satisfied with the model, fit, and colour before you buy.
Helmets must be returned with the original instructions, stickers, and, if possible, original packaging. 

Return Conditions (PPE) 

Comfort foam. Buckle that can be fastened and released with one hand. Adjustable dividers. Use the adjustment dial to ensure a snug fit. 

Parts 

Helmets

Warmth

Lightweight and compressible. Fits easily inside a pocket or backpack.

This fleece neck-warmer is designed to keep your kids warm this winter.

type of lining

Season

Weather Conditions

Reversible

modular

Windproof

Kids' Ski Clothing

The hard plastic and foam backing absorb impacts.

Easy to adjust thanks to elastic rip-tabs.

Comfort and safety for starting skating, scootering or skateboarding.

interchangeable left right

Support Type

Protection Area

The wrist guards should be worn with the plastic shell over the palm. The R and L markings on each wrist guard can help young kids learn right from left.

How to wear the wrist guards

All kids grow at their own pace. That’s why our size guide is based on age and weight:
XXS: Age 3–7, or less than 25 kg (55.1 lb)
XS: Age 6–10, or 25–35 kg (55.1–77.2 lb)
S: Age 9–15, or less than 50 kg (110.2 lb)
Trying the product in-store can help you choose the right size.

Sizing

Please note that measurements are provided for information purposes only and do not take into account whether you use protective gear over clothing. When worn over clothing, choose a larger size.

Choosing the size of your protective gear

Your safety and comfort is our top priority.   

Safety

Body Protection

Waterproof membrane, water-repellent outer fabric.

Durability

Elastic tightening system at the wrist. Wide cuffs.

These mittens were designed for young occasional skiers. They will keep their hands warm in any weather conditions.

abrasion 

reinforced area

Reinforced Palm

Breathability

To Bring Warmth

leash

Type of Length

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

The mitten’s waterproof membrane consists of a very thin polymer film placed between the lining and the part of the glove in contact with the environment. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Loss prevention system

Kids Ski Gloves & Mittens

This dual-material neck warmer effectively protects from the cold.

Two fabrics mean it can be worn six different ways.

Flexibility

When worn over the nose, it provides effective moisture wicking.

Moisture management

This neck warmer is practical and easy to use. The dual materials mean kids can easily adapt the warmth around the neck.

Maximum wash temperature of 30°C. Very delicate cycle.

pattern

The Hug Neck Warmer packaging shows six different ways to wear it (hat, balaclava, neck warmer, etc.).

Polyester knit for breathability and drying.

Regular cut and stretch fabric for freedom of movement.

Freedom of movement

Very soft, warm and comfortable ski tights. So pleasant you’ll forget you’re wearing them.

belt height

You need three technical layers to keep warm on the slopes:
- Layer 1 or second skin, to stay dry.
- Layer 2 or insulating layer, to keep the heat in. 
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

Complies with EN1077:2007 standard (class B). ABS construction for strength.

Ventilation

Adjustment dial that goes around the entire head.

Stability

Lightweight

Goggles locked with 2 tab fasteners built into the helmet

Recessed ear protectors prevent ear compression

A ski helmet for young intermediate-level skiers looking for excellent support and optimal comfort for long days on the slopes.

RECCO system

Loft

The adjustment dial is key to keeping your child’s helmet secure. The dial allows for easy and precise adjustments, even with gloves on. It also provides maximum comfort and safety. Turn the dial to the right to tighten and to the left to loosen.

Adjustment wheel

The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. We recommend changing your kid's ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.

ABS structure

The European standard EN 1077:2007 applies to helmets used for cranial protection during downhill skiing and snowboarding. The standards test the helmet’s ability to absorb shocks and resist perforation. The two categories are:
- Class A: Protects the top and back of the head as well as the ears and side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Measure your head circumference (from the middle of the forehead and above the ears) and choose the right size. When trying it on, there should be no discomfort. If it has no visor, try the helmet with the mask: there should be no gap between the two.

How do you choose the right size?

For your kid’s safety, your ski helmet must be properly adjusted:
- The head size can be adjusted using the tightening wheel.
- The chinstrap must be properly adjusted. They must be able to fit 2 fingers between the strap and their skin. If fitted incorrectly, the helmet will offer less protection.

Adjust your helmet once you have the right size

We recommend changing your ski helmet every 5 years, unless it has sustained a significant impact in the meantime. In case of severe impact, you need to change the helmet: even if you can’t see it, the inner material may be damaged and your helmet will offer less protection.

When to change your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, choose a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: you don't need to wear a hat underneath – in fact, it’s best not to

Make sure this product is suitable before buying. If it doesn’t fit, you can return it subject to the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. It can be refurbished. 

Return conditions specific to personal protective equipment

Very soft, warm and comfortable base layer. So pleasant you’ll forget you’re wearing it.

Collar Type

sleeve length

anti-uv

Component encourages wicking and minimal drying.

This ski base layer was developed for kids. It will keep them warm on the slopes.

The BL 100 Base Layer Bottoms have a regular fit.
The classic straight cut adapts to a wide variety of body shapes.

Sports/

Winter Sports/

Ice Skating Gear/

Kids' Ice Skates/

oxelo

Kids' Ice Skates with 4 Adjustable Sizes, FIT 500 Warm