100% anti-UV. Brown S3 lens for good vision in sunny and overcast conditions.

Sun protection

Anti-fog treated dual lens and ventilated frame.

Anti-fogging

Field of vision

Double-density foam and comfortable fabric.

User comfort

40-mm (1 ½”) wide elastic with double non-slip silicone band.

Stability

Two buckles to quickly adjust strap length.

Adjustable

Can be worn with prescription glasses, maximum width 145 mm (5 ¾”).

Compatibility

These goggles offer a good field of vision with a powerful anti-fogging treatment for skiing in good weather. Compatible with glasses.

glass composition

strapping

Condition

Strap Type

Technical Lens

Glass Category

Weather Conditions

Field of Vision

Minimizes Fogging

With Case

Diving Mask Type

Because UV rays are harmful to eyes, all our goggles are certified 100% Anti-UV in accordance with the EN 174 standard. Goggles provide the best protection as they completely enclose your eyes, blocking direct and reflected UV light.

100% UV protection

S3 Sun is a dark lens that protects you from bright sunlight. We have selected a brown tint that offers good visibility in shaded areas or in the late afternoon when the sun is less bright.
Lenses are not scratch-resistant.

S3 Sun lens

The Performance anti-fogging system has a double lens with a treatment on the inside. The ventilation system allows air to circulate inside the ski goggles.
To ensure effective ventilation, do not block the vent, with a neck warmer, for example.
Do not rub inner surface of lens. Instead, dab it carefully to preserve the anti-fogging treatment for as long as possible.

Anti-fogging performance

Dual screen reduces condensation. Air trapped between the lenses creates a layer of thermal insulation. It reduces the thermal shock between the inside and the outside of the mask, decreasing fogging on the inner lens. The inner lens also has an anti-fog treatment.

Double lens

Wraparound dual lens. The outer lens is made from an extremely shock-resistant injection-moulded polycarbonate. Inner lens is made from cellulose propionate.

Wraparound lens

The G 500 Ski Goggles have a high performance field of vision, which offers good peripheral vision.

High performance field of vision

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Ski helmet compatibility

G 500 Ski Goggles in size L can be worn with glasses (maximum width of 145 mm/5 ¾”). The foam on the sides and the shape of the goggle skirt leaves room for each temple.

Compatibility with prescription glasses

40-mm (1 ½”) wide polyamide, polyester, and rubber elastic, 2 non-slip silicone straps

Strap

A coloured coating on the outer side of the ski goggles lens (known as coloured Flash) reduces the percentage of light that reaches the eye, reducing glare and improving clarity in sunny conditions.
The lenses are not scratch-resistant.

Coloured Flash lens

The EN 174 standard is a European standard applied to goggles used for eye protection when downhill skiing or during similar activities, such as snowboarding. The ANSI American standard is more stringent than the European standard for shock and impact resistance.
These ski goggles comply with both of these standards.

European EN -174 and ANSI standards

Moisture causes fogging. To prevent this, the foam should not get damp, for example by placing the goggles on a wet helmet or a hat. Falling face down in the snow can also cause your goggles to fog up. Always dry your ski goggles properly overnight to get rid of all the moisture so you can hit the slopes the next day with completely dry goggles.

Avoid fogging

Chose your size according to your head size.
Up to 55 cm (21 ½”) choose size S, from 56 cm (22”) up choose size L.

Two sizes

Snowboard Helmets

clearance

Ventilation channels inside the helmet with an outlet at the back.

Ventilation

470 g in size M (In-Mould/ABS hybrid construction)

Lightweight

Complies with the EN 1077:2007 standard (cat. B)

Impact protection

Warmth

Helmet liner is removable and machine washable at 30°C.

Easy to care for

Developed for regular freeriders who want a lightweight, durable, and ventilated helmet.

Adjustable Helmet

Skill Level

Frequency

Weight (g)

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Visor

Bluetooth Connection

RECCO system

Style

Certification

Detachable Visor

Loft

Fastener Type

The upper part of the FR 500 Ski Helmet is in ABS (resistance), and the lower part in In-Mould (low weight).
The ABS construction (rigid shell) is a little heavier but increases protection against penetration (branch, stones, etc.) 
The In-Mould construction has an outer polycarbonate shell that is moulded directly onto the EPS shell. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. 

Hybrid construction

The adjustment dial is key for keeping your helmet secure. The dial is easily accessible even with gloves on, allowing for easy and precise adjustments at any time. This makes it comfortable to use and provides maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Adjustment dial

Standard EN 1077:2007 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding.     This standard tests the ability of helmets to absorb shocks and resist penetration. There are two categories:
- Class A: protects the top and back of the head as well as the ears and the side of the head.- Class B: protects the top and back of the head but doesn’t cover the ears.

EN 1077 standard

* Measure the circumference of your head in centimetres (around the middle of the forehead and just above the ears). 
Then choose the size that corresponds to this measurement. 
Example: if the circumference of your head is 56 cm, you should try a helmet in size 55–59 cm.

Which size?

Take plenty of time to try it on properly. You shouldn’t feel any discomfort. If you do, try another model.
Always try your helmet with your mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there is no space between the top of the mask and the helmet.

Fitting

When skiing, your helmet should be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the adjustment dial.
* The chinstrap must be properly adjusted.
It’s a bit like a seat belt: if it’s too loose, it will not work properly and you will be less protected.

Helmet adjustment

Avoid wearing a thick hat under your helmet, as this moves the helmet away from your head and leaves you less protected. 
Instead, wear a very thin beanie or balaclava that does not affect your helmet. A helmet has good insulating properties. There is often no point in adding anything else. Avoid attaching a camera to your helmet because it can affect safety. The standard does not take into account any elements added to the helmet.

Safety

Removable liner is machine washable at 30°C.
Use only soapy water and a soft cloth to clean your helmet.

Ease of use:

Make sure this product is right for you before buying it.
Otherwise, you can return it in accordance with our terms and conditions (with the instructions, labels and, if applicable, the original packaging), and it can be refurbished. Together, let’s respect our planet.

Return terms and conditions (specific product: personal protection equipment)

Complies with EN 1077:2007 standard (class B).ABS construction for superior strength

Goggles locked with 2 tab fasteners on the helmet.

Ease of use

The helmet lining is removable and machine-washable at 30°C.

Recessed ear protectors prevent ear compression.

For young, intermediate-level skiers. Excellent support and optimal comfort for long days on the slopes.

Wedze helmets and goggles are designed to be worn together.

The adjustment dial is key for keeping your child's helmet secure. The dial, easily-accessible even with gloves on, allows for easy and precise adjustments at any time. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

The helmet’s structure incorporates an injection moulded, ABS outer shell to withstand powerful impacts. It combines durability with a significant capacity to withstand bumps and blows. The inner EPS liner absorbs shocks in the event of a collision. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

Construction

Standard EN 1077:2007 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding.      This standard tests the ability of helmets to absorb shocks and resist penetration. There are two categories:
- Class A: protects the top and back of the head as well as the ears and the side of the head.- Class B: protects the top and back of the head but does not cover the ears.

EN 1077 Standard

* Measure the circumference of your child’s head in centimetres (around the middle of the forehead and just above the ears). 
* Then choose the size that corresponds to this measurement. 
Example: if the circumference of your child’s head is 49 cm, they should try a helmet in size 48–52 cm.

What size?

Take plenty of time to try it on properly. Your child shouldn't feel any discomfort. If they do, try another model. Always get them to try the helmet with their mask, because not all helmets go with all masks. A helmet is compatible with ski mask when there is no air space between the top of the goggles and the helmet.

When skiing, your helmet should be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the adjustment dial.
* The chinstrap must be properly adjusted.
It's a bit like a car’s seat belt: if it is too loose, it will not perform its function and your child will be less protected.

Your child should avoid wearing a thick hat under the helmet that moves the helmet away from their head because they won't be as well protected. 
Choose a thin hat or balaclava. A helmet provides good insulation and may be all you need to keep warm. Avoid the safety hazards of attaching a camera to the helmet. The standard does not account for items added to the helmet.

Adjustment wheel covers the back of the head.

6 holes to aerate and wick away moisture.

Complies with standard EN 1077:2007 category B. ABS structure for superior strength.

Thin earpieces. Foam inserts for comfort.

Removable comfort foam is machine-washable at 30°C.

Developed for the young occasional skier. This simple and robust helmet is perfect for kids to enjoy their first skiing experiences safely this winter.

The adjustment dial is key to keeping your child’s helmet secure. The dial allows for easy and precise adjustments, even with gloves on. It also provides maximum comfort and safety. Turn the dial to the right to tighten and to the left to loosen.

The helmet’s structure incorporates an injection-moulded, ABS outer shell to withstand powerful impacts. Durable and resistant to bumps and blows. The internal Epos skullcap absorbs impact during collisions. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

ABS structure

Standard EN 1077:2007 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding.     This standard tests the ability of helmets to absorb shocks and resist penetration. There are two categories:
- Class A: Protects the top and back of the head as well as the ears and the side of the head.- Class B: Protects the top and back of the head but doesn’t cover the ears.

* Measure the circumference of your child’s head in centimetres (around the middle of the forehead and just above the ears). 
* Then choose the size that corresponds to this measurement. 
Example: if the circumference of your child’s head is 49 cm (19”), they should try a helmet in size 48–52 cm (18 ¾”–20 ½”).

Take plenty of time to try it on properly. Your child shouldn’t feel any discomfort. If they do, try another model. Always get them to try the helmet with their mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there is no air space between the top of the goggles and the helmet.

When skiing, your helmet should be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the adjustment dial.
* The chinstrap must be properly adjusted.
It’s a bit like a car seat belt: If it is too loose, it will not perform its function and your child will not be properly protected.

Your child shouldn’t wear a thick hat under the helmet, as this reduces protection. 
Instead, choose a very thin beanie or balaclava. A helmet has good insulating properties. There is often no point in adding anything else. Avoid attaching a camera to the helmet as it can affect safety. The standard does not take into account any elements added to the helmet.

Make sure this product is right for you before buying it.
Otherwise, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging; and it can be refurbished. Together, let’s respect our planet.

Head size adjustment dial, full coverage.

6 holes and ventilation channels for breathability and perspiration wicking.

410 g (14 ½ oz.) in size M. The lightest helmet in the range.

Complies with the EN 1077:2007 standard (cat. B). Very lightweight In-Mould structure.

Ear pads and thick hat in a brushed material.

Warm, well-ventilated liner with full coverage.

Developed for regular skiers looking for a light, comfortable, ventilated helmet that they’ll forget they’re wearing.

The adjustment dial is key for keeping your helmet secure. The dial, easily accessible even with gloves on, allows for easy and precise adjustments at any time. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

This type of structure, known as In-Mould, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. In-Mould structure is more sensitive to everyday impact. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

In-Mould construction

Standard EN 1077:2007 is a European standard that applies to helmets used for cranial protection during downhill skiing and snowboarding.      This standard tests the ability of helmets to absorb shocks and resist penetration. There are two categories:
- Class A: Protects the top and back of the head as well as the ears and the side of the head.- Class B: Protects the top and back of the head but does not cover the ears.

* Measure the circumference of your head in centimetres (around the middle of the forehead and just above the ears). 
* Then choose the size that corresponds to this measurement. 
Example: If the circumference of your head is 56 cm (22”), you should try a helmet in size 55–59 cm (21 ½–23 ¼”).

Take plenty of time to try it on properly. You shouldn’t feel any discomfort. If you do, try another model. Always try your helmet with your mask, because not all helmets go with all masks. A helmet is compatible with a ski mask when there is no air space between the top of the goggles and the helmet.

When skiing, your helmet should be properly fitted and adjusted:
* It is essential to choose the right size.
* The head circumference must be adjusted using the adjustment dial.
* The chinstrap must be properly adjusted.
It’s a bit like a car seat belt: If it’s too loose, it will not perform its function and you will be less protected.

Avoid wearing a thick hat under your helmet that moves the helmet away from your head because you won’t be as well protected. 
Instead, wear a very thin beanie or balaclava that does not affect your safety. A helmet has good insulating properties. There is often no point in adding anything else. Avoid attaching a camera to your helmet because it can affect safety. The standard does not take into account any elements added to the helmet.

Use the dial at the back of the helmet to adjust the fit.

6 holes for aeration and wicking away moisture.

Complies with the EN 1077:2007 standard (cat. B) ABS structure for superior strength

Thin earpieces and comfortable foam padding.

Removable comfort foam inserts are machine-washable at 30°C.

Developed for occasional skiers looking for a simple helmet to safely negotiate their first ski turns.

The H 100 Downhill Ski Helmet is the most affordably priced model in the Wedze ski helmet range.
For safe skiing by beginners and occasional skiers. This helmet complies with the same standards as the others. However, its comfort and finish are more average compared to the other models. It does not have the same level of quality as a more expensive helmet.

Experience

Use the adjustment dial to keep your helmet secure. Easy to reach even with gloves on, use the dial to make simple and precise adjustments any time. Adjust for comfort and maximum safety. Turn the dial right to tighten and left to loosen.

The helmet is injection moulded, with an ABS outer shell capable of withstanding powerful impacts. Durable and resistant to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. We recommend that you change your ski helmet at least every 5 years or following a significant impact.

ABS construction

EN 1077 is a European standard that applies to downhill skiing and snowboarding protective helmets. This standard tests the helmet’s ability to absorb shocks and resist perforation. The 2 classes are:
- Class A: protects the ears and the top, back and sides of the head
.- Class B: Protects the top and back of the head but does not cover the ears.

* Measure the circumference of your head in centimetres (around the middle of the forehead and just above the ears). 
Choose the size that matches this measurement. 
Example: For a head circumference of 56 cm (22 in), try a helmet in size 55–59 cm (21 ½–23 in).

Take plenty of time to try on the helmet carefully. You shouldn’t feel any discomfort. If you do, try another model. Always try your helmet on with your mask. Not all helmets are compatible with all masks. To be considered compatible, there should be no gap between the goggles and helmet.

When skiing, your helmet should be properly fitted and adjusted:
* Choosing the right size is essential.
* Use the adjustment dial to adjust the head circumference.
* Properly adjust the chinstrap.
Think of it like the seat belt in a car: too loose and it won’t do its job to protect you.

For optimal protection, avoid wearing a thick hat under your helmet that could cause it to shift on your head. 
Wear a thin beanie or balaclava instead. Helmets have good insulating properties. They may be all you need. Attaching a camera to your helmet is not a great idea. It could affect your safety. The standard does not account for anything added to the helmet.

Make sure this product is right for you.
If not, you can return it as our terms and conditions provide, i.e. complete with the instructions, labels, and the original packaging, as applicable; it can be refurbished. Together: Let’s respect our planet.

Product returns (Specific product: personal protective equipment)

8 vents, internal ventilation channels, and a ventilation grill in back.

Complies with EN 1077:2007 standard (class B). Lightweight, In-Mould construction. 

Ear protectors and thick hat. Full coverage at the back of the neck.

Elastic cord keeps the mask in place. Anti-freeze turn-down (forehead).

Recessed ear protectors to prevent ear compression.

Developed for regular skiers seeking a lightweight ski helmet with excellent retention and ventilation. 

Ventilation Zippers

ear pad

The PST 580 Ski Helmet is designed for regular skiers. In addition to its light weight, it has an effective ventilation system (8 holes, internal ventilation, and ventilation grills on the back). The vents can be opened or closed to regulate temperature.
Recessed ear protectors (hollow inside) offer great comfort and better hearing.

Known as In-Mold, this type of structure features a polycarbonate outer shell moulded directly to an EPS liner. The inner EPS liner absorbs shock in the event of a collision. The whole thing is extremely lightweight. We recommend that you change your ski helmet at least every 5 years or after any significant impact.

In-Mold construction

Helmets used for head protection when downhill skiing and snowboarding are required to meet European standards.      The standards test the helmet’s ability to absorb shocks and resist perforation. The two categories are:
- Class A: Protects the top and back of the head as well as the ears and side of the head
.- Class B: Protects the top and back of the head but does not cover the ears.

100% anti-UV brown lenses are ideal in both sunny and overcast conditions. S3

Optimum anti-fog, dual lens, and ventilated frame.

Spherical lens with optimal field of vision.

Double-density ergonomic foam and comfortable fabric.

40-mm wide elastic with double non-slip silicone strap.

Size L with glasses, 145-mm width maximum.

We have designed spherical lens goggles with maximum field of vision and optimal anti-fogging to ski in good weather. Goggles compatible with prescription glasses.

Because UV rays are harmful to eyes, all our goggles are certified 100% Anti-UV in accordance with the EN 174 Standard. Masks are the best protective solution as they perfectly enclose the eyes preventing any direct or reflected UV light from entering.

UV Protection

S3 SUN's screen means a dark lens that protects you from the intense light of the sun. We have selected a brown tint that offers good visibility in shaded areas or in the late afternoon when the sun is less bright.
Lenses are not scratch-resistant.

S3 SUN screen

Optimal anti-fogging combines a treated dual lens and an air vent on the frame that ventilates the inside of the ski goggles.
For good ventilation, do not block air vents with a neck warmer, for example.
Do not rub inner surface of lens. Instead, dab it carefully to preserve the anti-fogging treatment for as long as possible.

Optimal anti-fogging

Goggle design with a dual-ventilated lens to limit fogging. Indeed, the air that is trapped between the 2 lenses creates a layer of thermal insulation. This layer reduces the thermal shock between the inside and the outside of the goggles, decreasing fogging on the lens. The inner lens also has an anti-fogging treatment and is equipped with air vents that provide a good airflow.

Ventilated dual lens

The spherical shape limits optical distortion.
The outer screen is made from injected polycarbonate, very resistant to impact while the inner lens is acetate.

Spherical lens

There is a vertical and a horizontal visual field. The G 900 has an optimal field of vision.

Optimal field of vision

The Ski G 900 Ski Goggles in size L can be worn with glasses (max. width of 145 mm). The foam on the sides and the shape of the goggle skirt leaves room for each temple.

40-mm-wide polyamide, polyester, and rubber elastic, 3 non-slip silicone straps.

Protect the goggles, and the lens in particular, from scratches before and after use. This case also cleans the lenses and its material prevents scratches.

Sports/

Winter Sports/

Snowboarding/

Snowboard Helmets/

dreamscape

Ski and Snowboard Helmet - H-FS 300 Black