Keylock shape and flat tint on the carabiner for easier handling.

Easy opening/closing

Lightweight

Pack of 5 versatile quickdraws (Klimb 11 cm) for climbing and mountaineering.

Height (cm)

Pack

Condition

major axis resistance (in kN)

Skill Level

Carabiner Shape

Weight (g)

Type of Snap Hook

Width

Length (cm)

Main Material

New patented system for gate opening/closing. The spring located inside the gate is held in place by a plastic runner which slides over the carabiner body. This new system replaces the strip system. It boasts the advantage of being more reliable during the assembly phase and in use. This system has been lab-tested in line with the applicable standards and in the field by our team of technical partners.

Innovation

Carabiner:
Major axis:  22 kN
Minor axis:8 kN
Open gate: 7 kN

Strap
Length: 11 cm (4 1/3")
Width: 16 mm (3/5”)

Technical features

Quickdraws should be cleaned with fresh water and dried away from a source of heat. Do not use chemicals.
For more details, refer to the instructions for use.

Cleaning and maintenance

Store the quickdraw in a dry, cool, and ventilated place, away from UV light and chemicals.
For more details, refer to the instructions for use.

Storage and transport

Guidelines for use

The carabiners are certified: EN 12275: 2013 and UIAA 121: 2018
The straps are certified EN 566: 2017

Certification

Gear

onlyonline

Features teeth on the side for easy setup on the rope

Ease of use

For an 8.9 mm (1/3") by 11 mm (2/5") single rope or a 7.5 mm (1/4") by 9 mm (1/3") half rope.

Compact design

Single belaying/abseiling system, intended for indoor climbing or rock climbing activities.

type of belayer and descender

Type of Climbing Rope

belaying a second climber

This belay has 2 V-shaped brake grooves to slow the climber's descent.

Braking principle

If the system is dirty, clean it with fresh water and dry it away from heat sources. Do not use chemical products.
For more details, refer to the instructions for use.

Store the system in a dry, cool, and ventilated place, away from UV rays and chemicals.
 For more details, refer to the instructions for use.

Product in line with the standard EN 15151 -2 2012 and UIAA 129

simply attach to harness tie-in loop using a cow hitch

dynamic lanyard capable of absorbing potential fall at anchor

Durability

The rubber part keeps the carabiner in the main axis for safety

Stability

2 strands of different lengths to facilitate safety and rappelling manoeuvres

Versatility

Designed to be used as a climbing relay on cliffs or to secure your rock climbing progress.

Number of Carabiners

Bags & Ropes

Impact protection

Ventilation

ABS shell construction protects helmet from everyday scratches

Abrasion resistance

This helmet is designed for climbers and mountaineers of all levels, adults and children. It is very hard-wearing and perfect for clubs.

Adjustable Helmet

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

reflective

removable foams

number of aeration points

Bluetooth Connection

Style

Detachable Visor

Fastener Type

Ventilation:

Adjustment system:

ABS shell construction ensures perfect energy absorption of shocks or impacts.

Absorption:

You can attach a headlamp to the helmet with four attachment points, ensuring excellent lighting stability.

Compatibility:

Product certified in line with the European standard EN 12492:2012

Certifications:

Helmets

The hat, waistband, helmet holder and back plate can be removed

Flexibility

Weight:1,160 g (with accessories) or 850 g (without accessories)

Several gear loops: skis, poles, ice axes, ropes, helmet, flask, etc.

Main component in double rip-stop polyamide

Check out our 33 L mountaineering backpack and explore the mountains in all seasons, for a day trip or a weekend.

Volume (L)

- Length: 65 cm 
- Width: 35 cm 
- Height: 20 cm (17")

What are the dimensions of the Alpinism 33 backpack?

This backpack has a storage capacity of 33 litres.

What is the volume of the Alpinism 33 backpack?

- 2 ice axe holders
- Outside front pocket for shovel bucket, jacket, skins
- Ski, snowboard and snowshoe carrying straps
- Hydration pocket: 2 hooks, drinking tube hole
- Gear loop on the belt
- Mesh helmet carrier
- 500 ml flask holder on the shoulder strap 
- Inner pockets for shovel and probe tubes

What accessories are included in the Alpinism 33 bag?

- Thermoformed foam back, ensuring good carrying comfort and breathability.
- Rigid inner foam to increase the hold of the back that is removable to make it lighter. It can also be used as a bivouac mat.

How was the Alpinism 33 backpack designed?

- Padded and mesh-lined ergonomic adjustable shoulder straps with adjustable load adjuster straps. - Adjustable chest strap. 
- Padded and mesh-lined ergonomic hip belt  for better carrying comfort.
- Two gear loops on the shoulder straps.

How can carrying be made easier?

This backpack has 4 pockets:
- A quick-access pocket at the top of the lid with a two-way zip.
- An inner mesh pocket on the inside of the top lid with a key hook.
- A stretch zipped pocket on the waistband (for storing cereal bars, etc.)
- An inside zipped pocket at the bottom of the backpack for papers and car keys

How many pockets does the Alpinism 33 backpack have?

- Large two-way zipped side opening for quick and easy access to the main compartment.

How is the backpack opened?

Men's Backpacks

100% carbon tube for clipping the quickdraw more precisely.

Rigidity

Easy to attach to a harness with a carabiner using a cable loop

Easy transport

This pole is perfect for clipping a quickdraw.

Foldable

Moving Comfort

It is necessary to block the rod with a carabiner in the cable ring at the base of the rod to prevent it from unfolding unexpectedly.
Warning: do not unfold the rod in one go, as doing so can damage the carbon tubes. It is preferable to unfold them one by one to make the product last longer.

Product information

Total weight

Simond

1 adjustable carry strap for easy transport. 
2 compression straps. 

No need to refold your rope after each session thanks to these 2 straps.

Heavy-duty cover (600D polyester) protects rope from the ground.

Designed to hold up to 100 m (110 yd) of rope.

Capacity

This bag is designed to hold and protect climbing ropes for indoor or big wall climbing.

Waterproof

Number of Pockets

Type of Cover

carrying system

Number of Compartments

Weight

Seam resistance is greater than a webbing knot.

Breaking resistance

Available in 3 lengths (60, 120, & 175 cm [24/47/69"]) depending on your needs.

Tubular ring for multiple uses in mountaineering, climbing, and all vertical sports.

Diameter

Rope Length (cm)

Adjustable Length

Hook Type

Elastic

Product certified in line with the EN566:2017 standard

Standards

The Z-shaped rip tab makes them easy to put on and tighten as required.

The outsole is made of resin rubber for good grip and durability.

Grip

The rigid outsole keeps your foot comfortable on narrow holds.

The shape of the toe area and edges offer greater precision on holds.

Precision

Are you a beginner climber who goes climbing occasionally? These shoes with a modern design provide sufficient grip for those first climbing routes.

type of lining

Removable Sole

Shoe Shape

Practice Motivation

resealable outsole

Foot Width

Sole Type

Tightening Type

We have designed these shoes to have a straight shape with a flat profile, aligned with the natural shape of the foot. This provides greater comfort.

What shape are the First Klimb shoes?

Our 1st tip is to never machine-wash your shoes. Thermal and mechanical stress could damage them. We recommend that you wash them by hand, either with a sponge soaked in clean water or with a sponge soaked in soapy water (Marseille soap), being sure to air-dry them at a stable temperature and avoid drying them on a radiator or in direct sunlight. We recommend washing them regularly to increase the life span of the shoes.

How to maintain your First Klimb shoes

We recommend choosing the same shoe size as your everyday shoes, or 1 size larger if you want even more comfort or if you have wide feet. They should feel tight without hurting. If you are a beginner or are at an intermediate stage, it is important not to select shoes that are too tight to avoid painful feet and to allow your feet to develop their mobility, strength, and proprioception.

How to choose the right size of First Klimb shoes

Shoes & Harnesses

Waist belt and leg loops fitted with sliding pads made from 6mm thick EVA foam

Carrying comfort

A vertical single tie-in point for improved ergonomics and simplified handling

A single buckle on the waist belt and leg loops, covering sizes XS to XL

Adjustable

Single tie-in point with high-density PE thread for improved friction resistance

This climbing harness is a good choice to take you up your first routes as part of a group or club.

Adjustment Type

We recommend harnesses with a single tie-in for beginners as there is less risk of error when roping in. However, single tie-ins are slightly more complicated when used on climbing routes of varying lengths or when abseiling, as the tie-in involves a lot of equipment (rope, lanyards, belaying equipment). It is therefore recommend to use it primarily for big wall top roping.

What uses are a single tie-in point harness recommended for?

This harness has two wide gear loops on the sides for clipping on quickdraws, carabiners or belay gear as you progress up a route.

How many gear loops does it have?

For simplicity, this harness adapts to fit all sizes.
To maximise your comfort, once the straps have been tightened, don’t forget to slide the foam pads on the waist belt and leg loops so that they are located where you need the extra comfort.

How do you adjust your harness for maximum comfort?

How much does the First Klimb harness weigh?

Single strap adjustable from size XS to XL:
- Waist belt: 65-110cm (25.5 - 43.3 in)
- Leg loops: 32-70cm (12.6 - 27.5 in)

What sizes does the First Klimb harness come in?

This product is CE certified in accordance with standard EN 12 277+A1 2018

What certifications does this product have?

It is recommend to wash your harness in lukewarm soapy water (pH neutral) at 30°C maximum. Rinse thoroughly with tap water (do not use high water pressure).Leave your harness to dry in the open air on a drying rack (do not tumble dry).

How do I care for my harness?

Highly resistant to repeated folding and high levels of friction.

Elastic cordelette to really bite into narrow ropes.

Compatibility

Extremely lightweight—30 g compared to mechanical systems.

Flexible, strong loop ideal for tying autoblock knots (Machard, Prusik, etc.), rappelling, and pulleys.

Diameter (mm)

Cordelette core (inner) is made from Aramid braid.
This guarantees greater durability and exceptional longevity despite repeated folding when tying auto-blocking knots.

Technora Aramid core:

The sheath (outer layer) of the cord is made from polyamide braid.
This ensures good flexibility, allowing you to make effective friction hitches on all types of ropes, even those with very small diameters.

Polyester sheath:

A clear, resistant heat shrink sleeve protects the cord’s seam.
This helps to ensure the seam is in good condition for extra safety.

Heat shrink sleeve:

Weight:

Length:

2,200 daN (kg)
Seam tensile strength greater than a webbing knot

Tensile strength:

Diameter:

2 large EVA foam pads on the thighs for added comfort.

User comfort

Single visible tie-in loop makes it easier to rope in and avoid errors.

The harness can be slipped on like salopettes.

Easy dressing

Harness for children from 4 to 9 years old. Must be adjusted by an adult.

Anatomic design

Our instructors and climbers designed this full harness for young climbers from ages 4 to 9 and weighing less than 30 kg (65 lbs) to safely discover climbing

simond

Goliath HMS BLC carabiner