Waterproof coating 5,000 mm (Schmerbers) | Taped seams

Waterproof

Zipper at the bottom of the legs makes them easier to put on with shoes.

Easy dressing

Anatomic design

Hydrophilic coating (RET = 12): reduces condensation in the garment.

Breathability

Lightweight, compact top-layer pants | Weight: 200 g (7 oz.) in size L 

Lightweight

Designed for occasional hikes on easy trails in rainy conditions.  

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Frequency

reinforced area

Number of Pockets

belt height

Precipitation

Weather Conditions

Place of Practice

modular

Windproof

Pocket

breathability (in RET)

Type of Length

Customization

Type of Bell

Schmerber

Main Material

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water pressure (Schmerbers) before washing (equivalent to the pressure exerted by a 5-metre column of water).

Water resistance (fabric)

To determine a fabric’s breathability, we test its evaporative resistance or RET (based on the ISO 11092 standard). The lower the fabric’s resistance, the more perspiration can escape, and the higher the fabric’s breathability. 
RET < 9: extremely breathable fabric
RET < 12: very breathable fabric
RET < 20: breathable fabric
RET > 20: little or non-breathable fabric.

Fabric breathability

The fabric for this jacket is water-repellent: water slides off its surface. In this way, the fabric doesn’t soak up water and stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. Our water-repellent coatings are now perfluorocarbon-free. As a result, this model will be sold with a more environmentally friendly water-repellent treatment.

Your health is our top priority

To maintain water repellency, we recommend regular reactivation. 
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain waterproofing over time

How much you perspire depends on the intensity and duration of your physical activity.If the fabric isn’t breathable enough for the type of activity/exercise, your perspiration will condense inside the item.The jacket will feel damp inside. This dampness is not rain soaking through but condensation caused by perspiration. This means you need to choose top-layer pants suitable for your activity.This product is designed for 2-hour hikes at no more than 5 km/h (3 mph).

Choosing waterproof rain pants based on physical effort

For full-body protection from the wind and rain, we recommend the Raincut 1/2 zipper or full zipper men’s jackets.   

Other recommended products

Men's Hiking Pants

EVA fabric, 100% waterproof.
Taped seams. 

Compact design

S/M (360g/13oz.) to L/XL (400g/14oz.): put it in your bag and forget about it!

Comes with a bag.
Size: 18 x 20 x 2 cm (7.1 x 7.9 x 0.8”)

Compatibility

This backup poncho shelters you from a light shower when hiking.

Ventilation Zippers

sleeve length

Hood

Style

This poncho is available in 2 sizes:
157 to 173 cm (61.8 to 68.1”) in size S/M
174 to 190 cm (68.5 to 74.8”) in size L/XL
The snap opening makes this poncho easy to get on and off.

Fit and sizing information

For complete protection, we recommend wearing waterproof rain pants, such as:
NH 500 Rain Pants
on our website.

Additional product recommendations

EVA foam is not very resistant to tearing. We increased the thickness compared to the previous version and added reinforcements in high-pressure areas.

Good to know

Technologies: This garment was subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces average rain shower conditions in the mountains.

Waterproofing 

Men's Hiking Jackets

Merino wool offers a good balance between warmth and compactness.

Warmth

Wool fibre with polyamide for added strength.

Durability

Ultra-fine (18.5 microns), super soft merino wool. Does not itch.

Softness

The highly absorbent nature of wool helps keep the head dry.

Moisture management

This merino wool beanie is designed to keep you warm during your winter hikes and everyday errands.

Condition

Type of Beanie

beanie compatible

Reinforced fibre for lasting durability. Uses a new yarn structure in which a polyamide yarn forms a thin sheath that protects the merino wool fibres against friction and cuts.
This component weighs 155 g/sqm.

How was resistance designed?

Winter Hiking Gear

The component reduces body odour. Laboratory test ISO 17299-3.

Odour control

The acrylic thread in the fabric speeds up the drying time.

Quick drying

The blend of merino wool and synthetics makes the T-shirt more durable.

Wool is breathable and can be worn in summer and winter.

The T-shirt weighs 148 g (5.2 oz) in size L. 155 g/m² fabric.

Weight

A merino wool T-shirt for complete peace of mind on your multi-week treks around the world.

Maximum wash temperature of 30°C. Very delicate cycle.

Skill Level

Collar Type

Duration

anti-uv

Wool is the best material for trekkers on the move. This material’s inherent properties reduce sweat odours. So you can take fewer clothes in your backpack!

Why choose wool?

Men's Hiking Shirts

Protects against winds of up to 70 km/h (43 mph). 

Hydrophilic coating (RET = 12): Reduces condensation under coating.

When folded, the jacket fits into its own pocket.

Easy transport

This jacket is designed to keep you dry when walking in light rain.

Weight (g)

Pack

type of waterproofing

Zipper Type

Tightening Type

Fastener Type

The waterproofing of a fabric is measured in Schmerbers or mm of water (pressure of a water column). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water (Schmerbers) before washing (equivalent to the pressure exerted by a 5,000 mm column of water).

Water resistance of the fabric

The fabric of our product is very breathable -12 RET.
Component breathability is measured by its thermal evaporative resistance (RET). This refers to its capacity to release perspiration during activity. The lower the RET, the more breathable the fabric. 
RET ≤ 9: extremely breathable fabric;
RET ≤ 12: breathable fabric
RET ≤ 20: breathable fabric
RET ≤ 20: little or non-breathable fabric

To maintain water repellency, we recommend regular reactivation.
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain. 
You can easily reactivate the water repellency properties by warming the fabric:
- in a dryer for 15 minutes (synthetics cycle)
- with a hair dryer, moving back and forth from a distance of 20 cm (8”)
- with an iron on the delicate setting and with the steam function off

How to maintain your jacket’s waterproof coating

This rain jacket was designed for a 2-hour hike at a maximum speed of 5 km/h (3 mph), with no ascent.
How much you perspire depends on the intensity and duration of your physical activity.If the fabric is not breathable enough for your activity, perspiration will condense inside the jacket,and you feel damp.This moisture is not rain soaking through the shell, but condensation caused by perspiration.You need to choose a rain jacket for your type of physical activity.

Choose your waterproof jacket according to the intensity of your activity. 

Abrasion resistance

Hybrid design with a stretch fabric in high-friction areas.

Freedom of movement

Synthetic fabrics selected for their quick-drying properties.

Light, breathable fabric in low-friction areas.

5 secure pockets including 4 with a zipper and 1 with a flap and snaps.

Pockets

The reinforced area on the seat is water-repellent.

Water repellent

Machine-washable synthetic fabric. Do not iron.

Ease of Maintenance 

These shorts weigh about 300 g in UK size 16 (L)

These hiking shorts are ideal for walking comfortably in good weather. The reinforced inserts in areas that are prone to rubbing improve durability.

Options

Stitching Type

Short / Skirt Length

These pants are designed with 3 different fabrics:
- a durable fabric (198 g/m²) on the areas that need protection from abrasion (seat, bottom of the leg at the front). This fabric is also stretchy, so you can move freely.
- a light, breathable fabric (145 g/m²) on the rest of the pants.
- a very stretchy crotch gusset.

Why choose a hybrid construction for the MT 500 Hiking Shorts?

The MT 500 Hiking Shorts are equipped with: 
- 2 zipped hand pockets
- 1 zipped right thigh pocket and 1 interior phone compartment
- 1 left thigh pocket with flap
- 1 zipped back pocket

The shorts come with a belt.

What accessories are available for the MT 500 Hiking Shorts?

A straight cut and stretchy fabric that guarantees comfort. Choose your usual size. 
Inside leg 29.6 cm (11.7”) in size L. 
Hem width: 26.1 cm (10.3”) in size L.

What is the fit of the MT 500 Hiking Shorts?

Hiking Shorts

Knitted with thin plush loops in the areas where you need it.

Fitting comfort

Polyamide thread and ventilation zone under the instep.

Moisture wicking

Maximum wash temperature of 40°C. Normal cycle.

height of the sock

thickness of the sock

reduced chafing

moisture management

Elastic

Packaging

Height of upper

Knitted with thin plush loops for comfort and cushing in the areas where you need it (heel, ball of the foot).

Thick socks

There is a special construction at the tip that makes the sock conform perfectly to the shape of the toe area.
The seam at the toe enclosure is located under the toes in the hollow area to prevent chafing on the top of the foot.

Seamless

Running Socks

Ideal for spring and autumn.
Recommended temperature: 8°C
Limit temperature: 3°C

Stretch

Reinforced coating on the palm reduces abrasion.

Tactile efficiency

Polyester knit for breathability and keeping your hands dry.

Pairing buckle lets you clip the gloves together. Ideal for storing them.

Ease of use

These gloves are designed for mid-season hikers to provide warmth and dexterity in cool weather.

abrasion 

Season

reflective

Reinforced Palm

Air Temperature

anti-slip

leash

All our gloves are lab-tested on a thermal hand. The temperature ratings (recommended and limit) come from a study with a test panel of 23 walkers exposed to temperatures ranging from 5°C to -20°C and 10 km/h winds. These temperature ratings are only valid in walking conditions. The MT 500 Hiking Gloves have a warmth rating of 1 out of 5. Recommended temperature: 8°C | Limit temperature: 3°C

How is usage temperature measured?

Just like you wear several layers of clothing when hiking, you can wear liner gloves under your gloves that will act as a thermal base layer. This multi-layer system enables pockets of air to form around your hands, efficiently insulating them from the cold.Remember to wear large enough gloves so your fingers do not become constricted. Compression reduces blood circulation in the fingers.

How to effectively protect your hands from the cold

When active, the body generates heat that is preserved by your clothing’s thermal insulation. If clothing isn’t warm enough, your body cools down and circulation to your hands and feet drops to keep your core warm. Your clothing therefore plays a role in keeping your hands warm.

How to keep your hands warm with the right clothing

Dexterity refers to your ability to handle objects while wearing gloves. Our MT 500 Hiking Gloves have been rated in a laboratory. The closer the glove’s dexterity is to 5, the easier it is to handle objects while wearing gloves. For example, we tested the MT 500 Hiking Gloves for putting on and opening a jacket, handling objects in a bivouac, and eating and drinking. The MT 500 Hiking Gloves have a dexterity rating of 4 out of 5.

What is a glove’s dexterity?

The MT 500 Hiking Gloves are not windproof.
Did you know that the wind can make you feel colder? An outdoor temperature of 0°C with a wind speed of 20 km/h feels like -10°C. The windproof components reduce the wind chill resulting from the cooling effect of the wind.
For complete protection from the elements, pair them with our MT 500 Hiking Waterproof Over-Gloves.

Are these gloves windproof?

Avoid placing the gloves on a heat source to dry. This could damage the fabric and they could lose their shape.

Did your liner gloves get wet?

Cross-Country Ski Gloves

5 mm lugs with good grip.
Rubber sole with very good grip.

Traction

Durable rubber stone guards at the front and back. 

Robustness

Waterproof, breathable membrane: keeps feet dry for 8 hours, in any weather.

Weblock on 2 loops support your foot. Medium ankle height.

Thick EVA foam midsole: comfort and protection from uneven ground.

Cushioning

Ideal for day hikes on mountain trails. The mid-height upper will give you greater protection as well as comfort on trails.

Removable Sole

Shoe Height

Drop

Outsole Technology

type of leather

Playing Surface

Foot Width

Our products are classified based on performance for 3 hiking levels:
- Occasional: around ten hikes a year, 3-4 hours each, less than 10 km, and less than 700 m of elevation.
- Regular: about 20 outings a year, 4-6 hours each, 10 to 20 km, and 700 to 1,200 m of elevation per outing.
- Intensive: more than 20 times a year, more than 6 hours each, more than 20 km, and 1,200 to 2,000 m of elevation per outing.

What frequency and intensity of hiking are these shoes for?

New high-performance sole with an exclusive rubber blend developed by our experts. More grippy, more durable. The sole was designed for grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions. Field tests in the mountains allowed us to do the final validation with a panel of testers. 
30% rubber

Outdoor Contact sole

In a lab, the shoe is immersed in water to mid height while on a mechanical arm that simulates walking. We use this test to determine how long and how far the shoe can go and stay dry. The results are validated in the field and in the rain to ensure consistency.

Waterproofing test

To keep feet dry, use a waterproof gaiter or mini-gaiter to protect the top of your shoes and keep water, pebbles, and sand out.

Re-waterproof shoes twice a year (search for “waterproofing” on our Decathlon website) to help restore original water-repellent qualities and prevent stains on the outside.

forclaz

Men’s 2-in-1 Hiking Pants - MT 100 Grey