clearance

Easy to put over your bikes (elasticated bottom section).

Easy dressing

Compatible with all bikes (without a child seat)

Compatibility

Protect your bike from dust and light rain.

Protection from weather

Robustness

This bike cover protects your bikes from bad weather, dust, and unwanted attention. Sold with a storage pouch.

Condition

Intensity

Weight (g)

Number of Pockets

Type of Cover

Waterproof

Foldable

Number of Compartments

Fastener Type

Cover when in use:
Length: 228 cm (90")
Width: 70 cm (27 1/2")
Height: 123 cm (48 1/2")

Cover when folded in its storage bag:
Height: 25 cm (10")
Width: 15 cm (6") Depth: 7 cm (3")


Dimensions: 

Colour: Black

An elasticated section at each end tightens the cover and reduces the chance of it catching in the wind.
A rip tab fastening keeps the cover on the bikes.
The shape of the cover makes it quick and easy to put on even if your bikes have a basket, mudguards, and/or a pannier rack. The only accessory not compatible with this cover is a child seat, which should be removed before putting the cover on.

Features: 

To keep your bikes upright without leaning them against a wall and damaging the bikes or your protective bike cover, you can purchase a storage stand to place on the floor.

Complementary products:

Weight:

The 2 bikes must be staggered in order to position the cover properly

Storing the bikes: 

Bike Covers

700 x 35 to 700 x 45 tires. 48 mm (2") valve. ETRTO 35/45 – 622

Optimized composition to guarantee your inner tube has a good seal.

Designed for replacing the inner tube of your 700 diameter, 35 to 45 section tires with a 48 mm (2") Schrader valve.

Tire Assembly

Skill Level

Valve Type

Wheel Size

Self-Repair

Section

Etrto

Check all the information indicated on the sidewall of the tire (diameter and width). For example, 700 x 35 means that the tire is 700 mm in diameter and 35 mm wide.
The dimensions in mm are also on the tire sidewall.
For example, 36-622 means that the tire is 35 mm wide with a 622 mm inner diameter (approx. 700 x 35).

How to choose your inner tube

Remove the old inner tube using Btwin tire levers.

Removing an inner tube

Check the condition of your tire and replace it if necessary. 
Make sure no objects are lodged in the tire.
Check the condition of your tire rim strip.
A rim strip that’s even slightly bent can cause punctures.
Check that your rim doesn’t have any other issues that could damage your inner tube.

Checks to carry out before installing an inner tube

Watch our video before you start.
Pre-inflate the inner tube slightly to avoid pinching.
Make sure you’re using the correct valve for your rim and then insert it.
Put the entire inner tube inside the tire so that it fits inside the rim.
Take care not to pinch the inner tube when installing it.

Installing the inner tube

Start installing the tire at the valve.
Finish installing the tire across from the valve to avoid pinching the inner tube.
Never install your tire with a tool or a tire lever, as you risk pinching or puncturing the inner tube.

Installing the tire

Carefully inflate your tire to the pressure recommended by the manufacturer (visible on the tire sidewall in PSI or bars: 1 bar = 14.51 PSI).
Regularly check that your tire is in the correct position as you inflate it.

Inflating the tire

To avoid punctures from pinching and for the best tire performance, we recommend checking your tires and inflating them to the suggested pressure before every ride.

Our professional advice

Bike Tubes & Valves

onlyonline

75 dB.Aluminum dome creates a clear, powerful sound.

Audio efficiency

Only compatible with 22.2 mm (9/10") handlebars (one of the most widely used)

Easy assembly/dismantling

This bell ensures your safety when riding in a less noisy environment.

Frequency

Assemble With Tools But Without Tools Provided

Assembly Type

Position

Main Material

Bike's Bells

100 mm diameter pressure gauge accurate to 1 PSI.

Precision

Power

The 260 mm metallic base provides excellent stability

Stability

Ease of use

Repair

We developed the 900 pump so you can easily pump your bike tires up to 10 bar or 145 PSI.

hose

type of connexion

inflation mode

Pressure Gauge

Pressure (Bars & PSI)

Length (cm)

Pump Type

The 900 bike foot pump will be your go-to for inflating your bike tires as easily as possible. Its oversized pressure gauge (100 mm) and accuracy of 2 PSI (or 0.2 bar) mean you’ll always have the optimal pressure in your tires to maximize performance, grip, and comfort, no matter the terrain!
There’s also a visual marker to make it even easier to read when visibility is poor.

Inflation precision

The 900 foot pump has a 32 mm diameter cylinder, making it a breeze to build up pressure in your tires.

Easy inflation

The connection head has an ergonomic lever and markings with clear positions to easily differentiate between the actions of inflating / connecting. The intuitive design improves the user experience, ensuring a flawless inflation process and increased safety with the pinch-free lever.

Intuitive ambidextrous bow

The handle on this pump was designed for an excellent and comfortable grip.

Ergonomic handle.

The metal base and design of this pump make extremely stable.

The 900 bike pump has been awarded a Red Dot as part of the Red Dot Design Award 2024.

Product with a design award.

Bike Pumps

100% effective on all types of Butyl inner tubes.

Less restrictive and just as effective as a classic patch.

This self-adhesive patch kit lets you easily and quickly repair punctures so you can carry on enjoying your bike rides.

1. Remove the inner tube and locate the puncture
2. Roughen the area around the puncture using the sandpaper
3. Clean and dry this area
4. Apply the self-adhesive patch and press hard on the entire area for around 45 seconds
5. Run your nail over the patch to increase its adhesive power
6. Put the inner tube back in the tire and the tire in the rim
7. Inflate your tire to the recommended pressure.

User tip: 

Optimal lifespan: 3 years at room temperature (16-22°C, 30-70% humidity), away from direct light and in its original packaging.
Minimum temperature for repairs: +10°C 
Temperature for use: -40°C to +65°C

Storage:

Be careful not to touch the sticky part when positioning the patch, so as not to reduce its sticking power.
Remove any air bubbles by pushing from the centre of the patch towards the edges.
Rub the patch with your nail to warm it up and help it stick better.
Finally, press firmly with your thumb, covering the entire patch for 45 seconds to 1 minute (press on a clean, flat surface for greater effectiveness).

Applying the patch: 

A good sanding of the area concerned will give you a better result.
The aim is to obtain a flat, clean surface so the patch holds as well as possible.If the puncture is close to excess material, sand until the excess is removed.
Sanding will create micro-scratches that will allow the glue on your patch to set more easily.
This stage is very important for a lasting repair.

Sanding: 

Clean away any impurities to ensure a clean, flat, and dry area to apply the patch.
Remember: don't use water or any other product to clean your inner tube after sanding. It's essential to have a clean, dry surface to ensure that your patch lasts.

Cleaning: 

Rockrider

Notch to hold the tire lever on the spokes, perfect grip on tire, deflation tip.

Tire lever that clips together for easy storage.

Compact design

Designed for removing your bike tire. The tip allows you to deflate the tire, while its edges attach to the spokes for greater ease.

PA66 polyamide material avoids breakage when bent.

Tyre lever features: 

Bike Tools

Easy to put over your bike (elasticated bands along the hem).

This bike cover ensures your bike stays protected against bad weather, dust, and unwanted attention. Sold with a storage pouch.

Cover when in use:
Length: 180 cm (71")
Width: 50 cm (20") Height: 123 cm (48 1/2")

Cover when folded in its storage bag:
Height: 25 cm (10")
Width: 15 cm (6") Depth: 5 cm (2")

Colour: Black

An elasticated section at each end tightens the cover and reduces the chance of it catching in the wind.
A rip-tab fastening in the middle keeps the cover on the bike.
The shape of the cover makes it quick and easy to put on even if your bike has a basket, mudguards, and/or a pannier rack. The only accessory not compatible with this cover is a child seat, which should be removed before putting the cover on.

To keep your bike upright without leaning against a wall and damaging the bike or your protective bike cover, you can purchase a storage stand to place on the floor.

Not suitable for bikes with a baby carrier or those equipped with a basket on the back.
It can be challenging to install the cover on large bikes or bikes with very wide handlebars.This cover is not suitable for transporting a bike, whether on a train or a bike carrier.

Notes:

Memory foam considerable increases comfort.

User comfort

An adjustable strap fits all saddles (max. 14 cm).

Designed for occasional, short bike rides

Available in three sizes.
Size M: Suitable for saddles with a maximum width of 14 cm
Size L: Suitable for saddles with a maximum width of 17.5 cm
Size XL: Suitable for saddles with a maximum width of 22 cm

Size:

Bike Saddles

Maximum pressure: 6 bar/87 PSI (MTB/hybrid/city/kids' bike)

Clip connection. Reversible to fit different valves.

deflating mode

number of compression tubes

Tubeless compatibility (Tyre)

Sold In Set

Clips onto the valve. Adapts to different valve types by removing and reversing the pump head.(See instruction manual).

Valve compatibility

Protects the cyclist from the ends of the handlebars in the event of a fall.

Impact protection

Covers the end of MTB, hybrid and city bike handlebars.

Bike Handles & Grips

Thin, light material for good perspiration management.

Moisture management

Pre-shaped and elasticated bands for very good support.

Designed for riders who are looking for a colourful, technical product.

Maximum wash temperature of 40°C. Normal cycle.

height of the sock

Weather Conditions

Style

Packaging

Sock Height

Mid socks measuring 18 cm (7") high in size 6/8½
The height varies very little between sizes

Sock height

Men's Socks

Capacity

Watertight

Straps for attaching to the head tube, top tube and down tube

Designed for bike rides on trails in fair to rainy weather.

Volume (L)

Height (cm)

reflective

Attachment Type

Volume

The smartphone pouch has passed showerproofing tests and can withstand 12 cm of rain over 2 hours. 
The pouch lifts for simple smartphone insertion.

Waterproof smartphone pouch

Bottom opening on the smartphone pouch to pass a USB cable through. Left-side pocket opening for connection to an external battery.

Cable opening

High-frame bikes (closed frames), both electric and non-electric. Ensure the strap lengths fit your specific frame.

Bike Bags & Backpacks

Easily attaches to your bike using the 2 included screws.

This kickstand is designed to park an electric bike with a frame that accepts a kickstand on the left rear base.

Wheel Size (in)

Maximum Load

Attachment

This sturdy kickstand helps you safely park a bike carrying a heavy load. Adjustable to work with 27.5”, 28”, and 29” bikes.This kickstand is must-have thanks to its exceptional durability. Supporting up to 35 kg (77 lbs), it is perfect for keeping a bike balanced when carrying heavy loads such as pannier bags or a child seat. It makes it easier for cyclists to load and unload their bike.

Features

Distance between mounting holes: 18 mm (1”).
Height between mounting point and the ground: 26.5 (10”) to 31 cm (12”)

Compatible with our E-EXPLORE models for commuting use:

- E-EXPL 520 (ref 8732272)
- E-EXPL 700 (ref 8649387)
- E-EXPL 500S (ref 8732274)
- E-EXPL 520 S (ref 8649390)
- E-EXPL 700 S (ref 8655220)

Bike Kickstand

Volume: 2,5 litres. Can hold a repair kit and some personal items.

Universal, dual fastening under the saddle with velcro straps.

Never forget a thing!
Designed to carry your personal items and repair tools.

isothermal

Ipx Waterproofness

Panier Type

With Straps

This product has a hook for attaching a Vioo Clip, an LED light that can be clipped on anywhere and unclipped in an instant.


Quickly and easily clean any type of chain with a single cleaner!

Using the chain cleaner is quick and easy, and becomes a real pleasure.

This chain cleaner is designed for cleaning your bike chain quickly and effectively. Can be used on all types of chains and bikes.

Press the push button on the bottom compartment while pulling on the top part with the other hand.
Place the chain between the two parts of the cleaner and close them by fitting the top part into the bottom part.
Install the hook on your derailleur hanger.
Pour the degreaser through the hole at the top, observing the recommended level (around 9 ml [1/3 oz.]).
Clean your chain by turning the pedals anti-clockwise.

How to use this product: 

Leave for a few minutes. Complete the degreasing process with a few pedal turns.
Remove your chain cleaner.
We recommend that you rinse and dry your chain thoroughly before applying any lubricant.
To ensure that your chain cleaner works at its best, it is important to position your bike (on the ground or on a stand) so that your chain is as horizontal as possible.

For optimal results:

This chain cleaner has been designed to give you good efficiency while using much less product than its predecessor.
The previous model required 45 ml (1 1/2 oz.), whereas this one only needs 9 ml (1/3 oz.). So, with a 500 ml (1/2 qt.) canister you can do about 55 cleans (compared to about 15 with the previous one).

How much degreaser should you use?

After use, to maintain its effectiveness, remove the foam from the chain cleaner (located on the front), rinse, and wring out.
Rinse the castors and compartments with clean water, leave to dry, and wipe.

The foam will show marks from the first few passes of the chain, but this will in no way detract from its usefulness.

Maintenance advice: 

Use the vegetable chain degreaser for greater efficiency.
Renew your degreaser as soon as it is blackened. 
Collect your used degreaser and dispose of it at a waste disposal centre.

Tip from the pros:

The chain cleaner includes: 
- a lower compartment with 1 rotating brush, 1 foam, and 1 hanging system
- an upper compartment (cover) with 2 rotating brushes.

Dimensions:
Length: 160 mm (6 1/4")
Height: 91 mm (3 1/2")
Width: 38 mm (1 1/2")

We also offer a kit that includes 3 brush shafts, a hook, and 2 foam pads to give your chain cleaner a second life.

decathlon

Bike Stand for 2 Bikes