onlyonline

Floating cord to float a pair of glasses up to 38 g

Buoyancy

Holds glasses around the head using a toggle, or around the neck

Stability

Slip-on attachment system: compatible with most glasses.

Compatibility

Floating eyewear retainer designed for sailors wanting to secure their glasses around their neck or keep them in place on their face. Fits onto the arms.

Floatability

Condition

Frequency

reflective

Adjustable Length

Style

Hook Type

Elastic

Length (cm)

Ends 100% silicone
Outer fabric 100% polyester
Inner foam 100% polyethylene
Silicone end length 6 cm
Cord length excl. silicone end 33 cm
Total length (ends + cord): 78 cm

CORD

Attachment system that fits onto the tips of the arms: compatible with most glasses, except metal frames and slim arms

Check that the silicone end is compatible with the arm tips of your glasses before buying this product.

ATTACHMENT SYSTEM

Caps, gloves and sunglasses

Tested in moderate rain for 2 hours
5,000 mm Schmerber
Pocket not waterproof

Waterproof

Breathability

Pockets

The flat elastic waistband ensures a secure, comfortable fit.

Anatomic design

The pants easily pack down into a pocket.

Compact design

Waterproof pants for sailing in stormy weather.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Skill Level

reinforced area

shoes cover

waterproof seam

Number of Pockets

belt height

Type of Brushing Boots

Precipitation

Reversible

Silent

Place of Practice

modular

Stitching Type

Windproof

anti-uv

Pocket

breathability (in RET)

Type of Length

Type of Bell

Water-Repellent

Schmerber

With Straps

Fastener Type

Main Material

We measure a fabric’s resistance to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings:
Component resistant to 5,000 mm water pressure before and after ageing (5 washes). This is equal to 5,000 Schmerber (the average pressure exerted during rainfall).
The trousers' waterproofing has been tested in a rain shower with 60 litres of water/m²/hour for 2 hrs

Waterproof properties

Rinse with clean water after use.
Store in a dry place.
Wash as infrequently as possible to protect the water-repellent treatment.
Wash inside out, pocket zipped, on the synthetics cycle (30°C–40°C) with regular detergent. Do not use fabric conditioner. Do not overload your machine. Run extra rinse.
Line dry.
To restore its water repellency, tumble dry inside out on the synthetics cycle for 10–15 min.

Care instructions

We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
A component with that is waterproof to 5000 mm therefore resists the pressure of 5000 mm of water.

Waterproof rating

Breathability
To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the resistance, the better a fabric’s ability to let the body’s perspiration escape.
- RET < 9 = extremely breathable
- RET 9–12 = very breathable
- RET 12–20 = breathable
- RET > 20 = not very or not at all breathable

Kids' Rain Pants

100% taped seams | 2-layer coating | 5,000 mm Schmerber 

Highly breathable coated fabric (RET < 12) reduces condensation. 

Fabric specially coated to reduce the windchill factor. 

2 closed pockets. 
Non-waterproof pockets.

Treated so water slides off the fabric surface. 

Water repellent

Materials and zips resistant to salt water and sea air. 

Resistance to salt water

This jacket is designed for inshore sailing in wet, stormy and windy conditions. Waterproof in moderate rain for 2 hours.

type of lining

type of waterproofing

type of hood

thumb pass

Hood

Zipper Type

Snow Skirt

Collar Type

sleeve length

Membrane Construction

Lining Material

Pack

top length

We measure the fabric resistance to water pressure in mm of water column (based on the JIS standard). The higher the water pressure a fabric can withstand, the more waterproof it is.
Waterproofing ratings: 
Component resistant to water pressure of 5,000 mm before and after ageing (5 washes). This equates to 5,000 Schmerber average pressure exerted by the water during rain.
The jacket’s waterproofing has been tested in a rain shower with 60 litres of water/m²/h for 2 hours. 

Water resistance 

- High collar 
- Injection-moulded plastic to avoid salt oxidation 
- Water-repellent components (water runs off the fabric) 
- 100% taped seams 
- Central opening features a flap with a drainage channel for optimal waterproofing 

Jacket waterproofing 

To find out whether a fabric is breathable, we test its evaporate resistance or RET (ISO 11092 standard). The lower the fabric’s resistance, the more moisture is evaporated, and therefore the higher the fabric’s breathability.
For example: 
RET < 9 = very breathable, 
RET 9–12 = breathable.
This jacket has two components with the following RET values: 
> more resistant fabric: RET < 12 (or 3621 g/m²/24 h, JIS1099A standard)
Lighter fabric: RET < 8 (or 2972 g/m²/2 

Breathability 

The hood is attached and doesn’t stow into the collar.
Its depth is adjustable. Regulations prohibit the addition of a drawstring on the collar.
The hood visor and headband provide good coverage and a better hold.
The high collar protects the neck. 

Hood 

2 zip pockets on the front of the jacket for your hands or a few items
Pockets are not waterproof. 

Pockets 

A zip on the entire jacket length with an interior flap protects against the wind and water.
Soft fabric flap on the top of the collar to protect the chin.

Front zip 

A fabric is water-repellent when water slides off the surface of the fabric, without seeping in.
Your jacket does not become waterlogged and remains lightweight and breathable. The water-repellent treatment applied to the external side of the fabric may alter over time. 

Water repellency 

Close all zips and flaps, empty all pockets, and turn the jacket inside out. Select a synthetics cycle (30°C–40°C) and use regular detergent. Don’t use fabric softener or bleach, as these can damage the water-repellent coating.

Don’t fold your garment too much when you place it in the washing machine. Do not overload.

Very important: Run a full rinse cycle or extra rinse to remove all detergent residue. 

Washing the jacket 

Drying is a crucial phase in reactivating the water repellent treatment.
First, lay the garment flat on a drying rack. The radiator? Forget it!
Once dry, put it in the tumble dryer on a short synthetics cycle (10–15 minutes), then turn it right side out. Do not over-dry. 

How to reactivate the jacket’s water repellency 

Kids' Hiking Jackets

Can withstand 1 hour of moderate rain. Taped seams.

Resists winds up to 50 km/h (Force 6–7).

Cut to allow your child to manoeuvre a boat or paddle without any discomfort.

Freedom of movement

Made of quick-drying waterproof material.

Quick drying

This a waterproof, windproof spray top is a must-have for your child’s training course, sailing lesson or occasional outing in a sailboat or kayak.

Maximum wash temperature of 30°C. Very delicate cycle.

This spray top has been tested both outdoors and in a simulator reproducing moderate rain conditions for one hour. The fabric resists 2,000 mm of water pressure after aging (equivalent to 2,000 Schmerber – similar to the intensity of a rain shower), and all seams are taped to provide extra waterproof protection.

The fabric chosen for this spray top delivers reliable wind protection whether your child is kayaking or sailing, keeping them comfortable throughout their time on the water.

Windproof 

A convenient hook-and-loop chest pocket lets your child store small items like gloves or snacks. The pocket is not waterproof.

A handy pocket

Kayak Clothing

UPF 50+ fabric. Sun protection even when wet. Blocks at least 95% of UV rays.

Sun protection

Prevents chafing against the board. 1-hour sessions.

Reduced chafing

Loop at the hem to attach to your shorts. Wave resistance

Resistant to impact of waves

Ease of Maintenance 

Designed for surfing in warm water for less than an hour. Limits abrasion on contact with the board

UPF standard

All our UV-resistant T-shirts are UPF 50+, meaning they offer maximum sun protection.  Choose your sleeve length based on your activity.
That said, our line was primarily designed to meet the specific needs of surfers.

Choose your T-shirt based on the duration of your surf session: 1 hour, 2 hours, or 3 hours.

How to choose your rash guard (Part 1)

1 hour: Occasional practice. Choose either a loose fit (easy to put on, comfortable when dry) or a tight fit (comfortable when wet). Look for a loop system so you can fasten the rash guard to your shorts.
2 hours: Regular practice. A rash guard with a drawstring and seamless underarm panels will improve fit and comfort in the water.
3 hours: Intensive practice. A style with added warmth will let you stay out longer.

How to choose a UV protection T-shirt (Part 2: )

Ideal for water sports, they can be worn in or out of the water. Chlorine-resistant.

UV protection even when wet.

UPF (ultraviolet protection factor) is an international standard that measures  the proportion of UV rays a fabric lets through to your skin.A UPF of 50+ means that the fabric blocks at least 98% of UVB rays and 95% of UVA rays.

What does UPF 50+ mean?

This rash guard reduces chafing against your surfboard or bodyboard. Its loose fit makes it easier to put on and more comfortable when dry. Choose the fitted 100 or 500 model if you prefer comfort when wet or plan to wear it under a wetsuit. Shown to reduce chafing during 1-hour sessions. If you plan to surf for longer, our 500 UV rash guard with seamless underarm panels is a better choice.

This rash guard has a front loop that attaches to the cord of your swim shorts to keep it from riding up while you surf. Ideal for sessions of up to an hour. For more than 1 hour, we recommend choosing the 500 UV top, which also has a drawstring at the hips for better stability. A rash guard can cause irritation on the lower abdomen if it rides up.

Support and stability in waves

This rash guard is recommended for use in water temperatures of 22°C and up. Air temperature may affect this recommendation. 
Our thermal models are made of fleece, neoprene, or both. We recommend choosing a model made with neoprene if you’ll be out in conditions where the wind exceeds 15 km/h.

Warmth and wind

Our UV T-shirts meet the needs of the most demanding surfers. They’re compatible with many other water sports, including swimming, kitesurfing, windsurfing, wakeboarding, water skiing, and stand-up paddle boarding.

Suitable for multiple water sports

This top is UV-resistant, but it doesn’t provide total sun protection. Consider other factors like reflections (off water, sand, etc.), temperature, and time of day. Wearing this top is just one part of staying safe in the sun. You should also wear sunglasses and a hat or cap, apply sunscreen regularly, and drink plenty of water.

Sun exposure advice

Olaian, Decathlon’s surfing brand, is based in Hendaye, France.
 With our offices right by the water, we’re able to design products and run field tests the very same day.

What is Olaian?

Surfing Rash Guards, Surf T-Shirts & Leggings

User comfort

Perforations around the temples allow air to circulate.

Ventilation

The hat weighs between 86 g and 88 g (3 oz and 3.1 oz) depending on the size.

Weight

This hat offers the best sun protection with a large brim and anti-UV fabric. 

Weather Conditions

UV Protection Factor

Customization

UV protection standards for hats are very specific. The fabric must be anti-UV (UPF index greater than 50), but this isn’t enough to claim that the finished product is anti-UV. The hat must also have a wide brim and flap that fully protects the face and the back of the neck (7 cm/2.7”)
The Travel 100 hat meets these requirements, so you can go hiking with complete peace of mind: you will be perfectly protected!

Why can you say that the Travel 100 hat offers UV protection?

The soft cord is comfortable. It keeps the hat in place even in windy conditions.

Does the Travel 100 hat hold well on your head?

We decided to make this hat with mostly cotton blended with polyester to increase its breathability.


Why were these specific materials chosen for the Travel 100 hat?

56 cm–61 cm: 86 g (3 oz)
59–62 cm: 88 g (3.1 oz)

Hiking Hats & Caps

10,000 mm H2O membrane (Schmerbers) for 30 mm of rain over three hours

Ripstop fabric for increased resistance to wear and tear

Durability

They can be put on and removed without having to remove your shoes.

Ease of use

Compact & clever, they can be stored in the built-in pocket & slipped into a bag

These overtrousers have a 10,000 H2O (Schmerber) membrane and can withstand 2 mm of rain in 3 hours. Your children stay dry and the adventure continues!

Season

We’ve designed these waterproof overtrousers for hiking or playing outside, even in the event of rain or changeable weather. Owing to its 10,000 mm Schmerber waterproof fabric (equivalent to a three-hour storm), they will stay dry.

How waterproof is it?

The Schmerber rating measures the waterproofing ability of a fabric. The higher the number, the drier you stay. With 10,000 mm H2O (Schmerbers), these overtrousers can withstand a water column of 10 m! Validated at 4/5 by our shower test, it will keep your children dry for up to  three hours of rain. 

What is the Schmerber?

Designed to withstand all your little explorers' adventures, these overtrousers are made with "Ripstop" fabric. This innovative material prevents tearing, even after a fall or snag.

Are these kids’ overtrousers durable?

Thanks to the practical gussets on the lower leg, your child can put them on quickly, even while wearing their shoes. No need to stop for any length of time when the rain is looming. A simple movement, and off they go! Your little adventurer is ready to continue their explorations, keeping nice and dry.

Are they easy to put on?

When the sun shines, don’t feel weighed down! These clever overtrousers are actually very small. Fold them into the built-in pocket and slip into the bottom of a bag. Compact and discreet, they patiently await their turn.

Can you store them anywhere?

Make the waterproofing properties of your overtrousers last longer! Reactivate every three washes or after 10 uses in the rain. Three easy methods: 
- 15 mins in the tumble dryer (synthetic cycle) ,
- 2 passes over with a hairdryer from 20 cm away

How to restore water repellency

These waterproof overtrousers are available in three sizes: 
- 7-9 years 
- 10-12 years 
- 13-15 years 

Available sizes

Kid's Hiking Pants

Hydrophilic film laminated to a plastic lens to prevent fogging.

Anti-fogging

Protect eyes against rays; lenses filter over 99% of UVA/UVB rays.

No more foggy masks to spoil your fun! This mask and its anti-fog film will help you make the most of your time underwater!

Sports/

Water Sports/

Sailing/

Caps, gloves and sunglasses/

tribord

Cotton Sailing Hat, 100