Storm protection. 3-layer membrane. 20,000 mm water (Schmerber).

Waterproof

29 cm (11”) side openings and component that wicks away perspiration (RET = 6).

Breathability

Lightweight

Drawstring at the hem, adjustable sleeves, adjustable hood.

Anatomic design

2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocket.

Pockets

Lightweight, compressible fabric saves weight and space in your backpack.

Compact design

Designed to protect you from bad weather during your regular mountain hikes.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Skill Level

Frequency

Season

Precipitation

Weather Conditions

sleeve length

Membrane Construction

Place of Practice

Windproof

Pocket

RECCO system

type of waterproofing

type of hood

thumb pass

breathability (in RET)

Type of Length

Hood

Style

Schmerber

Main Material

Slim fit with raglan sleeves and good stretch properties for plenty of freedom of movement during your hikes. 
A warm layer, such as a fleece or a lightly padded jacket, can be worn underneath. 

Elastic drawstring and tightening toggle for easy adjustment. 
Integrated semi-rigid visor provides high-level protection.
The small detail that makes the difference: a triangular opening on the side of the hood for better visibility.

Main component 

The waterproof rating depends on two key criteria: component and construction. 
This product was made with a membrane.
The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof and breathable. 
It is flexible, lightweight, and breathable.

Membrane

3-layer design: The membrane is glued between the outer and inner fabric. We use it for durable, high-performing jackets.

Layer design

Laboratory tests are conducted to guarantee the waterproof rating of a component. The resistance of a fabric is measured by the height of a water column in mm.
The higher the water pressure, the more waterproof the fabric. 
This product’s component has a 20,000 mm waterproof rating and can withstand the pressure of a 20,000 mm water column. 
This is equivalent to 20,000 Schmerber.

Component 
waterproofing

We conduct laboratory tests that simulate rainfall to guarantee the jacket’s waterproof rating. 
This product was validated in a shower test under 18 cm of rain for 2 hours. This test reproduces the average conditions of a mountain storm.

Water resistance of the 
jacket

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: not very breathable fabric 
This product as a RET of 6.

A fabric is water-repellent when water slides off its surface without being absorbed. Because the fabric doesn’t soak up water, it remains lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Water repellency can be reactivated by putting the item in the dryer for 10 minutes on low heat.
You can also use a waterproofing spray (ref.: 8554908).

How to restore water repellency

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.

Product design: our outdoor experts

Hiking Jackets

Comfort temperature: 5°C to -5°C. Down with a fill power of 800 cuin. 

Warmth

Easily folds away into the left-hand pocket with a double-pull zipper.

Surface-treated outer fabric prevents water infiltration.

Water repellent

Outer fabric: 100% polyamide, 35 g/m². 15-denier fabric.

Abrasion resistance

This padded jacket weighs approximately 320 g (13 oz) in size L.

Weight

Stay warm when hiking in cool weather. Up to -5°C when active and 5°C when inactive.

Condition

Air Temperature

Pack

Worn as a third layer, this down jacket was certified effective during standardized heat chamber testing to a low of -5°C. The model is wearing a synthetic, long-sleeved shirt and a light fleece underneath. It works with a simulated 5 km/h (3 mph) wind. We also tested this product in static mode; the comfort temperature is 5°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking: 
- Thermal insulation, because of the air trapped in the down and feathers.
- Ultra-lightweight: down wadding is lighter than synthetic and provides the same warmth. This saves more weight in your backpack.
- Ultra-compressible.

The advantages of down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches). Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation. This jacket is filled with 90% down and 10% feathers and has a guaranteed fill power of 800 cuin (international standard) or more. 

Measuring the fill power of down and feather filling

This fabric is water-repellent. Water repellency keeps the fabric lightweight and warm. It is recommended to wear a waterproof jacket over top in the rain. Treatment on the outer surface achieves water repellency, but the treatment can deteriorate with use. We recommend restoring it after each wash.

Water repellency (different from waterproofing)

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
Care instructions: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Use a gentle spin cycle. 
2. Tumble dry with 2 or 3 tennis balls; repeat 2 or 3 times until completely dry.

How to care for down jackets

After washing, we recommend using a water-repellent spray to prevent water absorption. This renews water-repellent properties and improves performance throughout the garment’s life cycle.

Restoring water repellency

Snags are common during hikes. The good news is that it can be repaired to prevent further tearing and to stop feathers from escaping. Need help repairing? Don’t worry! Some Decathlon workshops offer in-store repairs and can repair your jacket using an iron-on patch.

Got a snag? Here’s how to repair your down jacket.

XS: 78 g (3.8 oz.)
S: 83 g (2 oz.)
M: 89 g (4.7 oz.)
L:      95 g (2.6 oz.)
XL: 103 g (3.3 oz.)
2XL: 110 g (3.3 oz.)
3XL: 123 g (4.3 oz.)

Filling weight

Brushed polyester fleece jacket with a fabric weight of 330 g/m².

Quick-drying polyester fabric with a RET of 15.1.

Stretch material for greater freedom of movement and comfort when active.

Stretch

The perfect warm fleece designed for your winter outings. You’ll also love its two warm pockets and the wristbands on the cuffs.

Collar Type

Number of Pockets

Grammage

Zipper Type

The inside of your fleece is brushed, a tried and tested method for retaining heat. The principle is simple: Inspired by fur and animals, the component's knit is capable of trapping air, naturally insulating. The cuffs stop the cold air getting in.

A fleece that’s warm enough for winter?

Perspiration is normal when hiking. This can quickly become unpleasant when moisture builds up under your clothes. To avoid this unwelcome feeling, we designed this fleece with a breathable fabric that easily wicks away perspiration.

Why make a breathable fleece?

The breathability of a fabric is measured by its evaporative resistance RET (ISO 11092 standard): The lower it is, the more breathable the fabric. Examples: RET< 9 (very breathable), 9 < RET < 12 (breathable), RET > 20 (low breathability).
This fleece jacket has a RET index of 15.1.

What is a RET index?

The durability of our products is verified through various tests. We check, for example, that our fleeces don’t pill, the colours don’t run and repeated washing doesn’t affect the properties of the fabric. 
A Martindale test measures the resistance of the fabric to abrasion.

A soft, comfortable, durable fabric

With its light, stretchy component, your fleece lets you move freely, essential when hiking on snow. Your personal belongings will be safe in the zippered pockets.

A practical and comfortable fleece

To face the cold, follow the 3-layer technique: 
1) Technical and breathable base layer. 
2) Sweater or fleece for warmth and moisture transfer. 
3) Jacket for protection against bad weather. 
Make sure the outfit is breathable to wick away moisture.

Dress properly for hiking on snow

Clean your jacket, turned inside out and zipped up, at 30°C on a synthetics cycle. Don’t exceed a 1,000 rpm spin cycle. Avoid tumble drying to preserve the quality of the fabric.

Care instructions:

Hiking T-Shirts & Sweaters

Windproof fabric, brushed inside for comfort down to -11°C. 

Water-repellent material: water runs off the surface.

Synthetic fabric (over 90% polyester) for breathability and quick drying.

Lower leg with an elastic and hook that keep snow out.

Limits snow entering

Designed for regular hikes in the cold and snow, these softshell pants are stretchy, warm, and water-repellent.

reinforced area

belt height

Type of Brushing Boots

modular

Type of Bell

With Straps

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

What is water repellency and how can you maintain it?

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: the knit component is designed to trap air, which acts as a natural insulator, keeping the body warm. Animal fur and feathers work on exactly the same principle. 

How can I be sure that these pants are warm enough for winter hiking?

The slim fit and stretchy fabric provide essential freedom of movement. The zipped pockets keep personal items secure (tissues, lip balm, keys, etc.).

Comfortable, practical winter hiking pants.

In winter, protection from both moisture (snow, rain) and wind is important, because wind can significantly cool the body. The windproof, water-repellent outer fabric was designed to handle all winter conditions. We also added attachments to keep moisture out.

How do these pants protect from outdoor conditions?

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

Durability tests are conducted on selected components: resistance to rubbing and abrasion, and colourfastness. All these tests were conducted on the pant material.

Will your pants withstand regular use long-term?

Hiking Pants

Fleece fabric density: 230 g/m². Thermal comfort: between 7°C and 10°C.

Breathable fabric for better perspiration wicking.

A fleece that guarantees thermal comfort between 7°C and 10°C. Ideal for hiking in cool weather, you can take it anywhere. 

Customization

The secret of a warm fleece lies in its ability to trap air and use its naturally insulating character to form a thermal shield. This keeps your body warm. Tested to be comfortable in temperatures of 7°C to 10°C, this fleece is your trusty companion against the cold.

A fleece that offers insulation from the cold?

Sweating is almost inevitable during a hike, even when it’s cool out. That’s why this fleece is designed with a breathable fabric. So even during intense activity, it wicks away moisture from the body and keeps you dry and comfortable throughout your adventure.

A breathable fleece

We know that the weight of your bag is important when hiking. That’s why at just 300 g (10.6 oz) in size L, this sweater disappears easily into your bag when you’re not wearing it.

A lightweight, practical fleece

Easy to look after, this fleece is machine washable. Just remember not to exceed 30°C and limit your spin cycle to 1,000 rpm. Make sure you turn it inside out before washing. 
Avoid tumble drying to maintain the fabric’s quality.

How you should care for this fleece

Warm fleece jacket made from long fibres with a density of 300 g/m².

Lateral and back stretch inserts wick away moisture during activity.

Windproof inserts positioned on the chest, back, shoulders, and arms.

Stretch back and side yokes for more ease of movement.

3 secure pockets to carry your personal items.

Elastic jacket hem with silicone strips to keep snow out.

This fitted hybrid fleece jacket provides warmth and breathability during your regular hikes in cold weather.

Maximum wash temperature of 40°C. Normal cycle.

Body-mapping technology with our fleece jacket adapts the materials and design based on different body areas, providing warmth where you need it as well as optimal ventilation. Comfort and performance offer an unrivalled outdoor experience.

What is body mapping?

The secret of this fleece jacket’s insulation lies in its ingenious design. The texture traps air to form a natural heat barrier. Each brushed fibre maximizes this effect, keeping the warmth close to the body. Comfort and warmth guaranteed!

Why has this fleece jacket been insulated?

At 0°C, with 20 km/h winds, the temperature feels like -10°C! This is why it’s important the jacket is windproof. The insulation has been placed in strategic areas where you’re likely to lose more heat such as the chest, back, shoulders, and arms.

Why wear a windproof jacket?

The elastic hem with silicone strips is an ingenious way to keep snow out. This design lends itself to a perfect fit that keeps snow out. This ensures you stay dry and comfortable during your winter adventures.

Extra protection from the cold

The very close-fit cut allows for precise adjustment, and the elastane provides maximum comfort. Select your usual size or one size larger if you prefer a looser fit. Comfort and performance guaranteed!

What is the fit of this fleece jacket?

The stretch panels on the back and sides offer optimal freedom of movement during your activities. The jacket’s elastic design guarantees comfort and adapts to your movements.

A jacket that moves with you

We test the durability of our fleeces by checking: 
- Resistance to wear caused by a backpack and arm movements to prevent pilling 
- The durability of the seams
- The fabric’s durability and colour after washing, as well as exposure to UV rays and perspiration

Durability tested and approved

To face the winter, follow the 3-layer technique: 
1) Technical and breathable base layer. 
2) Sweater or fleece for warmth and moisture transfer. 
3) Jacket for protection against bad weather. 
Make sure it is all breathable to wick away moisture.

Wash this fleece jacket at 40°C. To preserve its properties, close the zippers and turn it inside out before washing. Limit spin cycle to 1,000 revs/mins and do not tumble dry.

How do I wash this fleece jacket?

Thermal insulation component, double brushed fabric (200 g/m²). High collar.

Breathable polyester knit allows perspiration to evaporate. Built-in zipper.

Comfortable, stretchy fabric is perfect for hiking.

Freedom of movement

Two zipper pockets secure personal items.

Compressible component takes up little space in your backpack.

This low-cost, warm, and breathable fleece was designed for occasional hiking in the mountains.

pattern

The brushed fleece component is designed to trap air. 
This air acts as a natural insulator, keeping the body warm. 
Laboratory tested for comfort with no additional layer at temperatures ranging from 7°C to 10°C.

Fleece material: Insulates by trapping air

We test our hiking fleeces to guarantee their durability.  
 

  2-year warranty

Polyamide fabric reinforcement reduces abrasion and increases heel stability.

French terry knit under the foot for a more comfortable fit.

User comfort

Asymmetrical fit (left and right socks) for improved alignment.

Knit stitch reduces blisters at the metatarsals and heel.

Reduced chafing

Designed for hiking in cold weather. These socks offer maximum comfort and warmth with the inside of the foot knit in merino wool.

height of the sock

thickness of the sock

reduced chafing

Options

Type of Socks

shoes with left or right mark

Packaging

Wool fibres can store a lot of air and let water vapour escape, making wool an excellent choice for moisture management and thermal regulation. Wool’s ability to store and release moisture make it an insulating, comfortable material for hiking socks.

The properties of wool

The merino wool, from Spain, has been a carefully selected breed for generations because of its wool. It provides a softer fibre than traditional wool. After shearing, the wool is cleaned to remove impurities, then carded, spun, and finally used for knitting or weaving.

What is merino wool?

Merino wool offers an unbeatable experience: soft, lightweight, and breathable. Thanks to its fine fibres, it provides natural thermal regulation. It keeps your feet warm in cool weather and cool in warm weather.

What are the benefits of merino wool?

To stay warm when hiking in the winter, we recommend: 
Warmth: wear warm socks (ideally with a good percentage of wool). 
Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of your socks should correspond to the height of the boot—for more protection, choose higher socks.

quechua

Men’s Full-Zip Hiking Fleece Jacket, MH 500