clearance

Waterproof

Windproof

Breathability

Water repellent

Pockets

Do not dry clean.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Do not iron.

Maximum wash temperature of 30°C. Very delicate cycle.

Bleaching excluded.

Men’s waterproof sailing jacket with 2-layer fabric.
Under simulated rain conditions, it can withstand   2 hours of moderate rain (60 L/m²/h). 
Fabric is resistant to water pressure of 15,000 mm Schmerber (JIS standard). Made of water-repellent fabric
with watertight seams.
The front zipper is protected by a storm flap and drainage channel.

Waterproofing of men's sailing jacket

To determine fabric breathability, 
we measure its resistance to evaporative heat transfer (RET). An RET < 9 means that this coat is highly breathable, i.e., it allows the body’s perspiration escape.

We’ve added an extendible cuff to the sleeves to keep the warmth in and the wind out.
The cuffs are easily adjustable with handy hook-and-loop tabs.

Sleeves

3 secure pockets:
- 2 spacious, warm, fleece-lined pockets on the front
- 1 inside zipped pocket on the left side

The 2-way zipper lets you open the jacket from the bottom for greater range of movement.

2-way zipper

Adjustable hood comes with
a discreet fastener on the inside to adapt its depth and
 side pulls to tighten the hood around your face. A
slim visor on the front of the hood keeps the rain off your face.

Hood features

Plastic-moulded zipper is resistant to salt oxidation.

Resistance to wear

Close all zips and flaps and remove any parts of the garment that cannot be washed. Loosen the straps and drawstrings and empty the pockets. 
Then turn the garment inside out to wash it.

How to restore water repellency 
Step 1: Before washing

Wash the jacket using the synthetics cycle (30°C–40°C) with regular detergent. Don’t use fabric softener or bleach, as these could damage the water-repellent coating.

Don’t fold your garment too much when you place it in the washing machine. Do not overload.

Very important: Run a full rinse cycle or extra rinse to remove all detergent residue.

How to restore water repellency 
Step 2: Washing

If water no longer runs off the surface of your jacket, even after following the washing and drying guidelines, we recommend that you restore its water repellency using a waterproofing spray.

tribord

Men's Waterproof Sailing Jacket - 300