Swim with fog-free goggles – these swimming goggles have an anti-fog treatment.

Anti-fogging

Enjoy excellent support thanks to the adjustable nose bridge.

Stability

These swimming goggles offer a very good field of vision.

Field of vision

Lenses filter more than 99% of harmful UVA and UVB rays to protect your eyes.

Sun protection

Ultra-easy-to-adjust goggles designed for kids who are new to the water or want to get back into swimming.

glass composition

Condition

fogging treatment

Skill Level

Technical Lens

Type of Lens

corrective lense

Nose Bridge Type

Tightening Type

With Case

Fogging is mainly due to the temperature difference between the body and the water.
As the body is warmer than the practice environment, fogging occurs on the inside of the lenses through evaporation.
As a result, every micro-drop of perspiration will stick to the inside of the goggles.

In fact, it’s a bit of luck: all these drops will eventually combine to create a film of water through which you can see clearly.

Why do my swimming goggles fog up?

The anti-fog treatment creates a microscopic film of water to allow clear vision, but its wear is accelerated by rubbing inside the lenses or overexposure to chlorinated water. Taking care of the inside of your glasses is essential.

Over time, it is normal for the anti-fog effect to diminish. Briefly soaking the glasses in water may help in the short term, but can also accelerate the wear of the treatment. Our anti-fog marker reactivates the treatment!

The anti-fog treatment

Specially designed for kids.
Their watertightness depends on how well the silicone skirts match the shape of your face. 
Before buying your goggles, we recommend that you carry out the “suction cup” test without the elastic band. Position the goggles over your eyes; if they hold on by themselves with a little suction, they will be watertight once in the water. This test also helps spot any areas that feel uncomfortable on your face.

Size of swimming goggle

These swimming goggles fit the morphology of your face without needing to be overly adjusted.

Over-tightening can cause discomfort, leave marks, and even let water in.

It is not necessary to press against the lenses with your hands, a light suction effect is usually enough for swimming sessions without water inlet holes.

The straps ideally should rest 2-3 cm above your ears.
This position will optimize the grip and comfort of the goggles. 

How to properly adjust your swimming goggles

All our swimming goggles protect against harmful UVA and UVB rays under normal use, regardless of lens tint. 

Looking directly at the sun is dangerous and can cause permanent eye damage.

UV Protection

Swimming Goggles

This new design avoids the risks associated with armpit chafing.

Reduced chafing

Tighten to fit with the adjustable strap at the front and 3-point safety buckle.

Adjustable

Swim vest for kids who are already comfortable in the water and are looking for moderate buoyancy. 

Difficulty Level

bladder

Sportsperson’S Weight

Inflatable

Style

Main Material

After observing the needs of kids in the discovering swimming phase, we came up with this new design to provide comfort and ease while practicing. 
Its simple shape envelops the torso and adapts to kids' size, while freeing the arms and shoulders for greater freedom of movement.
Kids using it must already be comfortable in the water because the buoyancy volume of this swim vest will keep them right at the surface so they can perform the first swimming movements. 

A word from the Product Manager

Nabaiji offers three experiences: "Discovering the water", "Discovering swimming" and "Discovering underwater". 
The Swimvest+ swim vest is part of the "Discovering swimming" experience: the children are comfortable in the water but have difficulty floating They use their arms and legs, and need lots of freedom of movement to benefit from their experience. 
This swim vest gives them the right level of buoyancy so that they can improve and be empowered when swimming. 

Nabaiji's 3 learning to swim experiences

This is not a life vest, but a learning-to-swim tool.

Ensuring the life vest fits properly on the child is very important to avoid friction. Follow the signs shown inside the swim vest.
Use under constant adult supervision.


Recommendations for use

Size 15-25 kg: This swim vest is certified 20 newtons EN 13138-1 with a buoyancy of 25 newtons
Size 25-35 kg: Certified 25N as per standard EN 13138-1 with buoyancy of 35N for this vest.

Buoyancy aid for learning to swim

Size 15-25 kg: approx. 230 g.
Size 25-35 kg: approx. 400 g.

Product weight

Swim Belts & Vests

The breathable mesh component wicks away perspiration and dries quickly.

Moisture wicking

It can be used as a headband, neck warmer, hat, etc.

Flexibility

Very lightweight and pleasant to wear, 100% polyester.

Lightweight

The fabric keeps your body at the right temperature while running.

Warmth

Compact design

A multifunctional high vis headband to protect your head or neck in cold and windy conditions from dusk till dawn.

Maximum washing temperature 30°C. Normal cycle.

Frequency

Weather Conditions

Packaging

Look
The design team chose a specific colour and made a graphic band that runs along the whole length of the neck warmer.

We also decided to work with a technical partner in Europe for this multi-purpose running headband. 
The product is 100% made in Germany.

What sets this multi-purpose headband apart from the rest? 

This one-size, multi-purpose neck warmer has been designed for head sizes of between 53 and  61 cm. The stretchy component means it can adapt to all head sizes.
Ultra-versatile, it can be worn as a hat, headband to hold back your hair, or neck warmer for road or trail running.

An essential and effective accessory to complete your running outfit in summer or winter!

What size (head circumference) is this multi-purpose neck warmer designed for?

Men's Headbands & Sweatbands

The cap’s stretchy and lightweight fabric makes it easy to put on. 

Easy dressing

Good support, ideal for occasional or recreational swimming.

Easy to put on and take off, this fabric swimming cap is designed for gentle, low-intensity sessions. 

Reversible

Breathability

Waterproof

Windproof

anti-uv

Customization

Mesh:
Made of a swimsuit type fabric that is easy to get on/off without pulling at your hair. Finishing seams around the head to ensure that the cap remains in place.

Coated mesh:
A comfortable mesh cap. It is coated with a layer of silicone that reduces leaks and manages elasticity, providing a close fit.

Silicone: 
Silicone is less comfortable but highly elastic to guarantee a close fit and prevent water from leaking into the cap.

How to choose your swimming cap material

There are several alternatives to standard swimming caps to suit everyone’s needs:

- brush caps: made of a highly stretch mesh.
- waffle stitch caps: made of latex, can be put on without pulling at your hair.
- volume or extra volume caps: the shape of these silicone caps provides more room for full hair.

- moulded or shell swim caps: these silicone caps are made for competitive swimming.

- neoprene caps: perfect for open-water swimming.

Are there other types of swimming caps?

S, M, L, one size… which is the right size for me? 

The choice is quite simple: fabric and coated mesh caps are available in different sizes (S, M, L), while silicone caps are available in only one size, because they are highly elastic.

To choose the right size, follow our short guide to head sizes:
- XS: 50–52 cm (19.7–20.5 in). (available in the range for babies)
- S: 53–56 cm (20.9–22.0 in).
- M: 56–59 cm (22.0–23.2 in).
- L: 59–62 cm (23.2–24.4 in).
- One size: 53 to 62 cm (20.9–24.4 in).

How to choose your swimming cap size?

Did you know? There’s a right and a wrong way round to wear a swimming cap!

Swim caps have a central band from the front to the rear. The line of the fold of silicone caps (visible when the cap is flat) is in the same direction as that of the preceding caps.

Then join your hands and put them inside the cap. Stretch out your hands and fingers to create enough space to put the cap on.

At the front, the cap must be worn about one finger above your eye brows. 

How to put on your swimming cap

For two reasons. 

First, by wearing a swim cap, you protect the environment in which you are swimming. By retaining your hair, the cap protects the quality of the water and facilities by protecting the hygiene of the pool or waterway. 

Second, caps also protect you! Caps protect your hair against the harm caused by water, chlorine (or other treatments) and salt (or other pollutants).

Why wear a swim cap

Swimming Accessories

Buoyancy aid

Once deflated, the armbands easily fit into a bag.

These swimming armbands are suitable for kids weighing 11 to 30 kg moving around in the water for the first time. This is the phase of discovering the water.

pattern

Buoyancy Index

Decathlon offers 3 Learning to Swim experiences: "Discovering the water", "Discovering swimming" and "Discovering underwater". Appropriate products are offered for each experience.
These armbands are part of the Discovering the water line.
Strong buoyancy at arm level helps beginners keep their head above the surface and gradually gain confidence while learning about water. The child can move in a more upright position by moving their legs.

Learning to swim promotes psychomotor development

Inflate one chamber, put the armband on the upper arm and inflate the other.

Fitting the product on the child's arms

2 independent inflatable chambers of the same size on each armband.

Safety

The armbands have uni-directional air valves.
To inflate the armbands correctly, press the base of the valve to open it.
The valve closes mechanically in about 2 seconds. As such, it is normal for a bit of air to escape after inflation. This is why you must close the cap quickly.

Inflating the valves

There could be a valve malfunction. The valve is not closing normally. Too much air is escaping before the cap is closed. To replace it correctly, pinch the valve 2 or 3 times with your fingers, then inflate the product to the maximum and close the cap. The flap should reposition itself properly.

What should I do if the armbands deflate while I'm inflating it?

After use, rinse the armbands. Do not leave them in direct sunlight.

Recommendation to avoid premature discolouration

Girls' Swimwear

Chlorine resistance

Quick-drying and comfortable swim shorts.

Quick drying

Water runs off the shorts without weighing them down

Water repellent

Designed for young kids discovering the joys of the water. These swim shorts offer good coverage support in all positions.

fixed cords

reinforced area

waterproof seam

Number of Pockets

belt height

reflective

Silent

Place of Practice

Stitching Type

Pocket

Type of Length

Type of Bell

Fastener Type

Babies' Swimwear

Swim without worrying about your nose clip. If you lose it, then it floats.

Buoyancy

This nose clip with a straight arch provides very good support.

Adapt the nose clip to meet your needs. Can be used in 2 different positions.

Anatomic design

This adjustable nose clip is designed for all swimmers seeking gentle protection to stop water entering their nose.

Floatability

Adjustable Length

The polypropylene frame of the nose clip is slightly flexible so that it fits easily and is tight enough against the sides of the nose.
The silicone foam pads are designed to maximize the contact surface with the nose and to improve comfort.
The density of the frame and pads make the product buoyant so that it does not sink to the bottom of the pool.

Material of the nose clip

Shape and texture ensure good grip in the water.

Grip

Ideal for discovering water polo and having fun in the water with family and friends.  

Weight (g)

Diameter (cm)

Player Type

Type of Finish

Certification

Playing Surface

Ball Size

The ball is almost two times lighter than an official water polo ball, which makes it easier to handle.

Weight

Water Games & Pools

Volume

Multiple compartments

Easily folds into its own zipped pocket to take anywhere.

Easy transport

Carry your clothing and gear to and from workouts with this foldable bag.

Volume (L)

cabin format

Bag Type

Options

Number of Compartments

This 30 L sports bag is designed to carry gym clothing and accessories. With an inner zip-up pocket for personal items.

Why buy this bag?

Size: 48 x 30 x 25 cm (19 x 12 x 10”). 

Dimensions

Main fabric: 
10% polyurethane
90% polyester

Composition

The straps are the perfect size for carrying the bag over your shoulder or on your elbow. It can also be carried by hand.

Two carry options

This bag is compact enough to take anywhere with you. It folds away into its own little pocket so you can slip it into another bag and use it when you need it!

Description: pockets and tips

Fitness Bags

The cap’s stretchy and lightweight fabric makes it easy to put on.

Good support, ideal for occasional, beginner, or recreational swimming.

This fabric swim cap is easy to put on and take off, making it perfectly suited to recreational use. 

Fabric Composition:
Made of a swimsuit type fabric that is easy to get on/off without pulling at your hair. Finishing seams around the head to ensure that the cap remains in place.

Coated fabric:
A comfortable mesh cap. It is coated with a layer of silicone that reduces leaks and elasticity, and provides a close fit.

Silicone: 
Silicone is less comfortable but highly elastic to guarantee a close fit and prevent water from leaking into the cap.

AlternativesMade of a swimsuit type fabric that is easy to get on/off without pulling at your hair. Stitching

How to choose the right swimming cap size

clearance

Waterproof membrane, water-repellent outer fabric.

Durability

Elastic tightening system at the wrist. Wide cuffs.

These mittens were designed for young occasional skiers. They will keep their hands warm in any weather conditions.

abrasion 

Season

Reinforced Palm

To Bring Warmth

leash

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

The mitten’s waterproof membrane consists of a very thin polymer film placed between the lining and the part of the glove in contact with the environment. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Sports/

Water Sports/

Swimming/

Swim Belts & Vests/

nabaiji

Kids’ Inflatable Pool Ring 65 cm