Durable fabric inserts. Ultra-durable Coats thread.

Abrasion resistance

Stretch fabric on the seat, knees, and lower legs.

Freedom of movement

Synthetic fabric for quick-drying properties.

Quick drying

Reinforced, water-repellent front and rear zones.

Water repellent

Light, breathable fabric in low-friction areas.

Breathability

5 secure pockets including 4 with a zipper and 1 with a flap and snaps.

Pockets

These pants weigh about 380 g (13.4 oz.) in size XL.

Weight

These hard-wearing pants have reinforced inserts and solid seams, making them ideal for hiking in comfort, or even just chilling at home.

Maximum washing temperature 30°C. Normal cycle.

Frequency

reinforced area

Number of Pockets

belt height

Weather Conditions

Place of Practice

Waterproof

modular

Windproof

Pocket

Type of Length

Type of Bell

Main Material

These pants are designed with 3 different fabrics:
- a durable fabric (198 g/m²) on the areas that need protection from abrasion (seat, bottom of the leg at the front). This fabric is also stretchy, so you can move freely.
- a light, breathable fabric (145 g/m²) on the rest of the pants.
- a very stretchy crotch gusset.

Why choose a hybrid construction for the MT 500 Hiking Pants?

The MT 500 Hiking Pants have: 
- 2 zipped hand pockets
- 1 zipped right thigh pocket and 1 interior phone compartment
- 1 left thigh pocket with flap
- 1 zipped back pocket

The pants are stretchy at the bottom so you can adjust them to fit perfectly over your shoes.

The pants come with a belt.

What accessories are available for the MT 500 Hiking Pants?

These pants have water-repellent inserts (front of leg, seat) so water slides off the fabric’s surface. This product is water-repellent, not waterproof.

The water repellency prevents the pants from getting wet too quickly. However, this won’t be enough to keep you dry if you’re in steady rain. For intense rain, you will need a pair of rain pants like the MT 500 Hiking Pants (ref. 8736465).

Water repellency can be reactivated using a water-repellent spray (ref. 8800346).

How water-repellent is the component in the reinforcement zones of the MT 500 Hiking Pants?

The regular cut and use of stretch fabric in the right areas guarantee high comfort when moving around.
Choose your usual size.

Inside leg measures 84.3 cm (33.1”) in size L
Width of hem: 21.3 cm (8.4”) in size L

How long are the MT 500 Hiking Pants?

Hiking Pants

Storm protection. 3-layer membrane. 20,000 mm water (Schmerber).

29 cm (11”) side openings and component that wicks away perspiration (RET = 6).

Lightweight

Drawstring at the hem, adjustable sleeves, adjustable hood.

Anatomic design

2 zipped hand pockets, 1 zipped inside pocket, 1 inside pocket.

Lightweight, compressible fabric saves weight and space in your backpack.

Compact design

Designed to protect you from bad weather during your regular mountain hikes.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Ventilation Zippers

Skill Level

Season

Precipitation

sleeve length

Membrane Construction

RECCO system

type of waterproofing

type of hood

thumb pass

breathability (in RET)

Hood

Style

Schmerber

Slim fit with raglan sleeves and good stretch properties for plenty of freedom of movement during your hikes. 
A warm layer, such as a fleece or a lightly padded jacket, can be worn underneath. 

Elastic drawstring and tightening toggle for easy adjustment. 
Integrated semi-rigid visor provides high-level protection.
The small detail that makes the difference: a triangular opening on the side of the hood for better visibility.

Main component 

The waterproof rating depends on two key criteria: component and construction. 
This product was made with a membrane.
The membrane is a kind of very thin plastic film (polyurethane) that makes the component waterproof and breathable. 
It is flexible, lightweight, and breathable.

Membrane

3-layer design: The membrane is glued between the outer and inner fabric. We use it for durable, high-performing jackets.

Layer design

Laboratory tests are conducted to guarantee the waterproof rating of a component. The resistance of a fabric is measured by the height of a water column in mm.
The higher the water pressure, the more waterproof the fabric. 
This product’s component has a 20,000 mm waterproof rating and can withstand the pressure of a 20,000 mm water column. 
This is equivalent to 20,000 Schmerber.

Component 
waterproofing

We conduct laboratory tests that simulate rainfall to guarantee the jacket’s waterproof rating. 
This product was validated in a shower test under 18 cm of rain for 2 hours. This test reproduces the average conditions of a mountain storm.

Water resistance of the 
jacket

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: not very breathable fabric 
This product as a RET of 6.

A fabric is water-repellent when water slides off its surface without being absorbed. Because the fabric doesn’t soak up water, it remains lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Water repellency can be reactivated by putting the item in the dryer for 10 minutes on low heat.
You can also use a waterproofing spray (ref.: 8554908).

How to restore water repellency

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. This location makes it a real meeting place for our teams and outdoor sports enthusiasts. It’s the perfect spot for designing our hiking products.

Product design: our outdoor experts

Hiking Jackets

Tightly woven fabric means you can wear a backpack without worrying about snags.

Built-in windproof membrane for maximum protection.

Protection from weather

Comfortable between 7°C and 10°C as a second layer. Brushed fleece on the inside

Optimum temperature

Zippered air vents let excess body heat escape.

Ventilation

Absorption

Water beads and runs off the treated fabric.

Designed to protect you from the wind during a cold mountain hike.

Close-fitting cut. The jacket’s inner volume allows you to wear it over a thin second layer such as a micro-fleece.

Sizing information

2 hand pockets + 1 chest pocket with zipper.

Pocket system

The wind can make you feel considerably colder.
When the outside temperature is 0°C, winds of 20 km/h make the temperature feel like -10°C.
Windproof components fight the discomfort associated with this freezing effect. Windproof elements form a barrier against the wind and effectively reduce heat loss.

Thermal comfort and windproofing

Jacket hem drawstring.

The main fabric used in the jacket, except for the sides, has a windproof membrane.

The water-repellent property of a fabric is its capacity to make water run off its surface without being absorbed. This keeps the fabric from soaking up water so the jacket stays lightweight and breathable. The fabric is made water-repellent by treating its outer surface; however, this property may deteriorate with use.
 

Water repellency (different from waterproofing)

Waterproofing spray for leather and fabric.
Wash-in waterproofing product restores the water-repellent properties.
It optimizes the performance of your garment throughout its lifetime.

Other recommended products

The component reduces body odour. Laboratory test ISO 17299-3.

Odour control

The acrylic thread in the fabric speeds up the drying time.

The blend of merino wool and synthetics makes the T-shirt more durable.

Durability

Wool is breathable and can be worn in summer and winter.

Softness

The T-shirt weighs 148 g (5.2 oz) in size L. 155 g/m² fabric.

A merino wool T-shirt for complete peace of mind on your multi-week treks around the world.

Maximum wash temperature of 30°C. Very delicate cycle.

Collar Type

Duration

anti-uv

Wool is the best material for trekkers on the move. This material’s inherent properties reduce sweat odours. So you can take fewer clothes in your backpack!

Why choose wool?

Hiking T-Shirts & Sweaters

Windproof fabric with brushed inner for protection down to -10°C.

Warmth

Water-repellent component. 
Waterproof inserts on buttocks and lower legs.

Stretch fabric, preformed knees, and semi-elastic waistband.

Stretch

Equipped with a gaiter and a fastening hook to keep snow out.

Limits snow entering

These warm, water-repellent, and ventilated trousers are perfect for your winter hikes. Guaranteed protection in any type of snow.

Type of Brushing Boots

With Straps

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

What is water repellency and how can you maintain it?

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: the knit component is designed to trap air, which acts as a natural insulator, keeping the body warm. Animal fur and feathers work on exactly the same principle. 

How can I be sure that these pants are warm enough for winter hiking?

Thermal comfort is a balance between warmth and breathability. If moisture accumulates, you will feel the cold when you’re less active. We designed these pants specifically for occasional, intense physical activities by adding a ventilation system in a micro-perforated fabric with side zippers at the thighs. A good balance between heat and ventilation for optimal thermal comfort.

Good ventilation for optimal thermal comfort

The slim fit and stretchy fabric provide essential freedom of movement. The zipped pockets keep personal items secure (tissues, lip balm, keys, etc.).

Comfortable, practical winter hiking pants

In winter, it is important to protect yourself from moisture (snow, rain) and wind, because they can significantly cool the body. The windproof and water-repellent outer fabric was designed to handle all conditions. Waterproof panels at the seat and lower legs.
Gaiters with fastening hooks for the laces keep snow out.

How do these pants protect from outdoor conditions?

These pants are part of the perfect outfit for hiking off the beaten path: the SH 500 outfit. With the SH 520 Pants, SH 500 Fleece, SH 520 Boots, and SH 500 Snowshoes, you can enjoy winter hiking in any conditions. Travel light with the right gear.

The perfect outfit for hiking in cold weather

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

Durability tests are conducted on selected components: resistance to rubbing and abrasion, and colourfastness. All these tests were conducted on the pant material.

Will your pants withstand regular use long-term?

Lightweight, two-way stretch fabric. Pre-formed knees.

Stay cool when you’re active:The fabrics wick away perspiration.

Removable belt and adjustable ankle cuffs for adjustable comfort

4 zipped pockets: Two hand pockets and two thigh pockets.

These hiking pants allow you to move freely! The 15% elastane and pre-shaped knees guarantee maximum ease of movement.

shoes cover

Complete freedom of movement, designed for adventure! The straight cut and stretch fabric (15% elastane) let you move freely. Preformed knees and crotch gusset for greater ease of movement.   Stylish, adjustable bottom hems.

Details about the cut and comfort?

These breathable pants are perfect for hiking. The lightweight, quick-drying fabric wicks away perspiration.   You stay dry, even when exercising. Our labs tested and rated them: 3/5 for breathability.

What are the benefits of breathable pants?

These pants are designed to keep all your personal belongings close at hand. Your phone, keys, and wallet can be stored in one of the 4 zippered pockets: 
Two hand pockets and two thigh pockets. 

What can you store in the pockets?

Easy care. Machine wash at 30°C and your pants are ready to go again. Tip: fasten the zippers and turn the pants inside out before putting them in the machine. The breathable fabric dries quickly.

How do you wash these hiking pants?

Windproof fabric, brushed inside for comfort down to -11°C. 

Water-repellent material: water runs off the surface.

Synthetic fabric (over 90% polyester) for breathability and quick drying.

Lower leg with an elastic and hook that keep snow out.

Designed for regular hikes in the cold and snow, these softshell pants are stretchy, warm, and water-repellent.

Comfortable, practical winter hiking pants.

In winter, protection from both moisture (snow, rain) and wind is important, because wind can significantly cool the body. The windproof, water-repellent outer fabric was designed to handle all winter conditions. We also added attachments to keep moisture out.

Comfort temperature: 5°C to -5°C. Down with a fill power of 800 cuin. 

Easily folds away into the left-hand pocket with a double-pull zipper.

Surface-treated outer fabric prevents water infiltration.

Outer fabric: 100% polyamide, 35 g/m². 15-denier fabric.

This padded jacket weighs approximately 320 g (13 oz) in size L.

Stay warm when hiking in cool weather. Up to -5°C when active and 5°C when inactive.

Condition

Air Temperature

Pack

Worn as a third layer, this down jacket was certified effective during standardized heat chamber testing to a low of -5°C. The model is wearing a synthetic, long-sleeved shirt and a light fleece underneath. It works with a simulated 5 km/h (3 mph) wind. We also tested this product in static mode; the comfort temperature is 5°C in this case.

How warm is this padded jacket?

The fill power of down has 3 advantages for mountain hiking: 
- Thermal insulation, because of the air trapped in the down and feathers.
- Ultra-lightweight: down wadding is lighter than synthetic and provides the same warmth. This saves more weight in your backpack.
- Ultra-compressible.

The advantages of down and feather filling

Fill power is a measure of the down’s thermal insulation capacity and potential to trap air. It is expressed in cuin (cubic inches). Down with higher fill power will take up more space, trap more air, and provide greater thermal insulation. This jacket is filled with 90% down and 10% feathers and has a guaranteed fill power of 800 cuin (international standard) or more. 

Measuring the fill power of down and feather filling

This fabric is water-repellent. Water repellency keeps the fabric lightweight and warm. It is recommended to wear a waterproof jacket over top in the rain. Treatment on the outer surface achieves water repellency, but the treatment can deteriorate with use. We recommend restoring it after each wash.

This washable down jacket can be worn all winter. But the less you wash it, the longer its thermal insulation and water repellency will last.
Care instructions: 
1. Machine wash at 30°C with detergent specially formulated for down or technical garments. Use a gentle spin cycle. 
2. Tumble dry with 2 or 3 tennis balls; repeat 2 or 3 times until completely dry.

How to care for down jackets

After washing, we recommend using a water-repellent spray to prevent water absorption. This renews water-repellent properties and improves performance throughout the garment’s life cycle.

Restoring water repellency

Snags are common during hikes. The good news is that it can be repaired to prevent further tearing and to stop feathers from escaping. Need help repairing? Don’t worry! Some Decathlon workshops offer in-store repairs and can repair your jacket using an iron-on patch.

Got a snag? Here’s how to repair your down jacket.

XS: 78 g (3.8 oz.)
S: 83 g (2 oz.)
M: 89 g (4.7 oz.)
L:      95 g (2.6 oz.)
XL: 103 g (3.3 oz.)
2XL: 110 g (3.3 oz.)
3XL: 123 g (4.3 oz.)

Filling weight

clearance

These thick merino wool tights (240 g/m²) are comfortable at 10°C.

Improved with inserts knitted into channels.

Merino wool reduces body odour. Laboratory tested to ISO 17299-3 standard.

Wool yarn protected by a surrounding polyamide yarn.

Ultra-fine (18.5 microns) merino wool. It’s very soft.

Tights weigh just 216 g (8 oz) in size L.

These thick and stretchy tights are designed with merino wool to protect you from cool weather when hiking.

Reversible

The hybrid design of these tights provides the optimal balance between warmth and breathability.
We used 2 fabrics:
- The main fabric is made from 89% merino and 11% polyamide (for durability) and weighs 240 g/m².
- The fabric used for inserts, particularly on the calves, is made from 63% merino, 24% acrylic (helps drying), 9% polyamide (for durability), and 4% elastane. Fabric weight: 260 g/m².

Fabrics used

These tights have a zipper fly. Practical for staying warm and not wasting time during your technical break!

simond

Men’s Hiking Pants, MT 900