Designed for users up to 130 kg.
Maximum load: 290 kg

Stability

In 10.5 ft, this SUP glides better than the 9.5-ft or 10-ft models in the range

Glide performance

Light and compact, it can be folded easily and carried in its bag

Easy transport

Experience unforgettable moments on the water with our 10.5-ft paddle. Ideal for two people (up to 130 kg) and designed for enjoyable outings as a duo.

Volume (L)

thickness (in inch)

Condition

Skill Level

Board Length (ft)

Maximum Load

Board Type

Power Assisted

Place of Practice

Practice Conditions

sold in pack

Number of Users

Board Width (in)

User’s Maximum Weight

Inflated board:
Length: 10.5 ft (320 cm)
Width: 33 in (84 cm)
Thickness: 6 in (15 cm)
Volume: 290 litres
Weight board only: 8.4 kg (+/- 5%)
Weight board, leash, fin & backpack: 9.6 kg (+/- 5%)
Weight of the paddle included: 850 g (+/- 5%)
Pump weight included: 1 200 g (+/- 5%)

BAG CONTAINING FOLDED SUP:
Height: 92 cm (15.8 in)
Width: 40 cm
Thickness: 30 cm

These dimensions leave plenty of room for the pump and paddle (not included).

Technical dimensions

Designed for riders up to 130 kg without compromising paddling quality.
Recommended user weight:
Under 80 kg: very stable board
Over 80 kg: the ideal board for getting started easily

The board can be used by more than one person: 
- 1 standing adult + 1 or 2 children (seated or kneeling)
- 1 standing adult + 1 adult (seated or kneeling)

Maximum buoyancy load to keep from sinking: < 290 kg

What is the recommended user weight and maximum load of the board?

Inflation:
Make sure the orange valve pin is in the upright position.
Connect the pump.
Inflate to 15 psi. 
The more you inflate the SUP, the more stable it will be. Disconnect
the pump and replace the valve cap.

Deflation:
Push down on the valve pin to let the air out.
Do not put your face near, and stay back.
Remove all air by rolling up from the side opposite the valve.

How do you inflate and deflate a stand-up paddleboard?

Never leave your board out of the water in direct sunlight.
If you have to leave your board in the sun, we recommend keeping it away from any sources of heat (walls, floors, car roofs, etc.) and reducing the pressure to 10 psi in order to prevent overpressure and irreversible damage (explosion, delamination, leaks, etc.).

How should I store my board and where to leave it to dry?

Fins and fin bases are available from our after-sales service and website
SUP fin reference: 8363793.

Always remove the fin once you’re on shore.
If possible, rinse the fin base before and after use.

Fold up from the fin base, following the dotted lines to avoid damage.

Fin and fin base

We have a stand-up paddleboard repair kit under the reference 8512384 for repairing small, easily visible leaks.
For all other repairs, we recommend that you contact the workshop of your local shore.
Fins, handles, valves, and significant leaks can all be repaired.

How can I repair my stand-up paddleboard?

A 10.5-ft SUP
A take-apart adjustable paddle
An easy manual pump
A standard fin
A backpack
A leash
An instruction manual
A repair cloth (glue not included)
A valve spanner (to be used when the SUP is deflated)

What’s in the pack?

Never unscrew the valve to deflate your SUP (may cause injury).
If the valve leaks, deflate your SUP and tighten it a quarter turn using the valve wrench.

If you need to replace the valve, please contact the workshop at your nearest Decathlon store.

What do I do with the tightening tool in the SUP bag?

Single-layer dropstitch without stringer. Double-thickness glued side strips.

What kind of construction?

We recommend:
We recommend the use of a buoyancy aid vest (reference 8552970) or a buoyancy aid belt (reference 8600104).
Do not go beyond 300 metres from shelter.
Do not use the leash on rivers.
Notify someone of your trip and location.
Make sure to familiarize yourself with any local navigation rules in the area.

Sports/

Water Sports/

Paddleboarding/

Inflatable Paddle Boards/

itiwit

10.5-ft Inflatable Stand Up Paddle Set for 1-2 People, 100