Wadding 200 g/m² back, 100 g/m² palm. Brushed mesh, synthetic fur lining.

Warmth

10,000 mm waterproof membrane and water-repellent outer fabric.

Waterproof

Palm and fingers: natural leather. Sides and fingertips: leather reinforcements.

Durability

Soft leather component. Preformed lining. Soft exterior fabric on the top.

Freedom of movement

Easy-slip stretch material on the hand and under the sleeve.

Easy dressing

Wrist cord to avoid losing gloves. Pairing loop.

Ease of use

Ability to handle objects when wearing the glove.

Dexterity

Warm, waterproof and flexible gloves for regular skiers looking for precision. 

Glove Type

Condition

abrasion 

Frequency

Season

reinforced area

Weather Conditions

Reinforced Palm

To Bring Warmth

Options

Stitching Type

Windproof

anti-slip

leash

Tightening Type

Main Material

All Wedze gloves and mittens have a water-repellent treatment that makes water slide off the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water-repellent. To remain effective, this treatment must be reapplied every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. 
Only a rubber glove is watertight. A glove with a membrane will have limited waterproofness in extremely wet conditions.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof fabrics limit wind chill and cold.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Anti-loss system

It reflects how easily you can handle objects while wearing the glove. All our gloves are field-tested and given a dexterity score on a scale of 1 to 5. Gloves with a dexterity score of 5 allow you to handle objects just as you would with bare hands. 
The dexterity score is based on how well we could remove and put on ski goggles, adjust the hooks on a ski boot, and open and close a jacket.

What is glove/mitten dexterity?

Snowboard Gloves & Mittens

Windproof fabric, brushed inside for comfort down to -11°C. 

Stretch

Water-repellent material: water runs off the surface.

Water repellent

Synthetic fabric (over 90% polyester) for breathability and quick drying.

Breathability

Lower leg with an elastic and hook that keep snow out.

Limits snow entering

Designed for regular hikes in the cold and snow, these softshell pants are stretchy, warm, and water-repellent.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Number of Pockets

belt height

Type of Brushing Boots

Place of Practice

modular

Pocket

RECCO system

Type of Length

Type of Bell

With Straps

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

What is water repellency and how can you maintain it?

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: the knit component is designed to trap air, which acts as a natural insulator, keeping the body warm. Animal fur and feathers work on exactly the same principle. 

How can I be sure that these pants are warm enough for winter hiking?

The slim fit and stretchy fabric provide essential freedom of movement. The zipped pockets keep personal items secure (tissues, lip balm, keys, etc.).

Comfortable, practical winter hiking pants.

In winter, protection from both moisture (snow, rain) and wind is important, because wind can significantly cool the body. The windproof, water-repellent outer fabric was designed to handle all winter conditions. We also added attachments to keep moisture out.

How do these pants protect from outdoor conditions?

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

Durability tests are conducted on selected components: resistance to rubbing and abrasion, and colourfastness. All these tests were conducted on the pant material.

Will your pants withstand regular use long-term?

Men's Hiking Pants

clearance

These thick merino wool tights (240 g/m²) are comfortable at 10°C.

Improved with inserts knitted into channels.

Merino wool reduces body odour. Laboratory tested to ISO 17299-3 standard.

Odour control

Wool yarn protected by a surrounding polyamide yarn.

Abrasion resistance

Ultra-fine (18.5 microns) merino wool. It’s very soft.

Softness

Tights weigh just 216 g (8 oz) in size L.

Weight

These thick and stretchy tights are designed with merino wool to protect you from cool weather when hiking.

Maximum wash temperature of 30°C. Very delicate cycle.

Reversible

Style

The hybrid design of these tights provides the optimal balance between warmth and breathability.
We used 2 fabrics:
- The main fabric is made from 89% merino and 11% polyamide (for durability) and weighs 240 g/m².
- The fabric used for inserts, particularly on the calves, is made from 63% merino, 24% acrylic (helps drying), 9% polyamide (for durability), and 4% elastane. Fabric weight: 260 g/m².

Fabrics used

These tights have a zipper fly. Practical for staying warm and not wasting time during your technical break!

Features

For a softer feel, wash your shirt before first use.

Tip before use

Machine wash your MT 900 Base Layer Tights at 30°C on a normal cycle, preferably with liquid detergent.
Dry flat and never tumble dry to avoid shrinkage.
To learn more,
visit our website.

How do I wash my merino wool tights?

Hiking Base Layers

Wool fibre with polyamide for added strength.

Merino wool offers a good balance between warmth and compactness.

There are 10 ways of wearing this product.

Flexibility

Ultra-fine (18.5 microns), super soft Merino wool. Does not itch.

This neck warmer made with merino wool protects you from the cold when trekking.

adjustable diameter

Packaging

Reinforced fibre for lasting durability: Uses a new yarn structure in which a polyamide yarn forms a thin sheath that protects the Merino wool fibres against friction and cuts.
The component’s grammage is 155 g/sqm.

Is this neck warmer sturdy?

Men's Neck Warmers

Merino wool tights for extra warmth, 190 g/m².

Wool’s high absorbency helps keep your body dry.

Moisture management

Merino wool is breathable and helps regulate body temperature.

Ultra-fine (18.5 microns) merino wool. It is very soft and non-itchy.

The tights weigh just 191 g (6.7 oz) in size L. 190 g/sqm fabric.

These merino wool tights are designed to help you maintain the right body temperature.

These tights are close fitting to help transfer moisture to the outside of the fabric.
Stretchy fabric for comfort and freedom of movement.

Sizing and fit

Betaspun yarn structure: polyamide threads coat the merino wool fibres, protecting them from abrasion and cuts without affecting their properties.

How did we increase the durability of these merino wool tights?

For a softer feel, wash your leggings before first use.

We recommend machine washing your merino wool T-shirt at 30°C on a normal cycle, preferably with liquid detergent. Dry flat and never tumble dry to avoid shrinkage.

How to wash merino wool tights

Merino wool reduces body odour. 
Laboratory test ISO 17299-3.

Merino wool shirt (190 g/m²) for additional warmth.

Wool fibre surrounded by polyamide yarn for protection.

The high absorption capacity of wool eliminates the feeling of dampness.

Merino wool is breathable and helps maintain the proper body temperature.

Ultra-fine (18.5 microns) merino wool. 
Soft and comfortable to wear.

This shirt weighs 225 g in size M
190 g/m² fabric

This long-sleeved T-shirt designed for hiking reduces bad odours thanks to it's 86% merino wool fabric component.

Collar Type

sleeve length

anti-uv

We have used a Betaspun yarn structure in which polyamide threads coat the merino wool fibres. This protects them from rubbing and abrasion without affecting their properties.

How we improved durability on our merino wool shirts

The fabric used reduces bad odours. Laboratory tested according to ISO 17299-3.
This means you can pack less clothing when hiking!

After any physical effort that involves a lot of perspiration, wool helps regulate body temperature (synthetic fabrics cause your temperature to drop faster). 
Merino wool reduces the unpleasant cooling or “freezing effect.”

Reducing the freezing effect

Suggestion

We recommend machine washing your long-sleeved merino wool shirt at 30°C on a normal cycle, preferably with liquid detergent. 
Dry flat. 
To avoid shrinkage, never tumble dry.
To learn more, visit our website.

Care instructions

Women's Hiking Shirts

Rublast rubber sole and KPU-reinforced upper in the high-wear areas.

Forefoot Support technology and semi-rigid heel insert for optimal support.

The CS technology at the side makes the cushioned heel effective and durable.

Cushioning

Arkstab technology: stiff shank providing optimal front-back stability.

Stability

3D mesh upper and memory foam around the ankle.

Fitting comfort

These tennis shoes were designed for advanced players and are suitable for intense footwork on all types of courts.

Skill Level

marking outsole

Type of Shoes

Removable Sole

Shoe Height

Drop

Stride Type

Outsole Technology

Playing Surface

Foot Width

405 g in size 8,5
The Artengo Strong Pro shoes are among the heavy shoes in the "advanced shoe" category. 35 g heavier than the Fast Pro, they provide greater stability and support for players looking for safety.

The outsole is made from ultra-durable rubber. By studying how tennis players move on the court, we were able to create the optimal sole shape for comfort and durability.

Sole

The KPU upper confers optimal support on the court (Forefoot Support technology). The upper is reinforced around the toes and instep for greater durability while sliding and moving around the court.

Forefoot Support and KPU upper

A rigid plastic insert at the heel guarantees optimal foot support while playing.

Heel support

A plastic shank stiffens the sole for maximum front-to-back stability while pushing off.

Arkstab

After several years of R&D by Artengo and the Decathlon SportsLab, the patented Lateral Cushioning System (Lateral CS) guarantees sustained lower impacts from the ground for tennis players.

Bio-mechanical studies on tennis players' movements revealed that "high impact durability" foam, when placed strategically in the sole, could reduce the force of impact by 13% (compared to the Artengo 2019 TS 990).

LCS technology

Thermoformed EVA insole that is durable, lightweight and comfortable.

Insole

The shoes have flat laces for easier tightening and better support.

Laces

Men's Tennis Shoes

Do not dry clean.

Do not iron.

Do not tumble dry.

Bleaching excluded.

It has a classic cut that’s not too fitted, for an optimal fit on all body shapes.

Classic cut

To avoid this discomfort, we chose a thin thread (18.5 micron) to provide a feeling of softness on the skin.

wedze

Men’s Merino Wool Turtleneck Thermal Base Layer Top, BL 500