Windproof fabric, brushed inside for comfort down to -11°C. 

Warmth

Stretch

Water-repellent material: water runs off the surface.

Water repellent

Synthetic fabric (over 90% polyester) for breathability and quick drying.

Breathability

Lower leg with an elastic and hook that keep snow out.

Limits snow entering

Designed for regular hikes in the cold and snow, these softshell pants are stretchy, warm, and water-repellent.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

Frequency

Season

reinforced area

Number of Pockets

belt height

Type of Brushing Boots

Place of Practice

Waterproof

modular

Windproof

Pocket

RECCO system

Type of Length

Type of Bell

With Straps

Main Material

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. It prevents the fabric from soaking up water, keeping it lightweight, warm, and breathable. Water repellency is achieved by treating the fabric’s exterior. The garment should be retreated over its lifespan (recommended after each wash). Products for this purpose (spray or liquid) are available in our stores.

What is water repellency and how can you maintain it?

The inside fabric is brushed—a tried-and-tested method for retaining heat. The principle is simple: the knit component is designed to trap air, which acts as a natural insulator, keeping the body warm. Animal fur and feathers work on exactly the same principle. 

How can I be sure that these pants are warm enough for winter hiking?

The slim fit and stretchy fabric provide essential freedom of movement. The zipped pockets keep personal items secure (tissues, lip balm, keys, etc.).

Comfortable, practical winter hiking pants.

In winter, protection from both moisture (snow, rain) and wind is important, because wind can significantly cool the body. The windproof, water-repellent outer fabric was designed to handle all winter conditions. We also added attachments to keep moisture out.

How do these pants protect from outdoor conditions?

Whatever your cold-weather activity, use the three-layer technique:
Layer 1: A high-tech base layer to wick moisture away from the body and keep your skin dry.
 Layer 2: A fleece jacket or sweater to provide warmth and transfer moisture outward.
 Layer 3: A jacket to protect against the elements (rain, snow, and wind). 
To eliminate moisture, the whole outfit must be breathable.

How to dress properly for hiking in cold weather

Durability tests are conducted on selected components: resistance to rubbing and abrasion, and colourfastness. All these tests were conducted on the pant material.

Will your pants withstand regular use long-term?

Men's Hiking Pants

Body mapping, 28% polypropylene on sweat zones: lightweight, waterproof

Moisture management

Very stretch thanks to the seamless design

Freedom of movement

Close-fitting cut helps to keep body heat in

Seamless design: less irritation, gentler on the skin

Reduced chafing

Whether you're a skier, cross-country skier, snowboarder or hiker, you can use this technical base layer, even for your most intense activities. 

Collar Type

sleeve length

anti-uv

Style

This ski base layer has a slim fit. It’s close-fitting, almost like a second skin. It doesn't constrict and reduces chafing to keep you comfortable throughout the day.

You need three technical layers to keep warm on the slopes:
- Layer 1 or second skin, to stay dry.
- Layer 2 or insulating layer, to keep the heat in. 
- Layer 3 to protect against the elements.

How to stay warm on the slopes

Yes. Thanks to its ultra-breathable design, this garment wicks perspiration away, keeping your body dry and preventing you from feeling cold due to the damp (in case of intense exertion). Its close-fitting cut also keeps you warm. For optimal comfort on the slopes, we recommend the 3-layer rule (see above).

Will this garment keep me warm enough?

This garment is 100% made in Europe, from the manufacture of its yarn in Italy to the final production in Bosnia.

100% made in Europe production

Hiking Base Layers

High coverage to keep you warm while wearing a helmet.

Compact design

Stretchy fabric fits perfectly while wearing a helmet.

Anatomic design

Effective perspiration-wicking synthetic weave.

Protects skiers and snowboarders of all levels in difficult conditions (wind, snow and cold).

Condition

Skill Level

type of lining

reflective

Weather Conditions

Reversible

Type of Beanie

beanie compatible

Water-Repellent

Wearing a balaclava is also more hygienic if you rent or borrow a helmet.

Hygiene

Ski Neck Warmers & Balaclavas

clearance

Full-length zippers on sides to remove ski pants without taking off your boots.

Easy dressing

Slim fit, adjustable shoulder straps, stretchy back fabric.

Windproof component on the front
Waterproof fabric rated 10,000 Schmerbers

Extremely breathable fabric on the back (RET = 7.1).

No-iron, machine-washable, synthetic fabric.

Easy maintenance

Lightweight

These ski pants were designed for cross-country skiers practicing in cold weather.

Intensity

Type of Layer

Practice Motivation

Fastener Type

Standard fit with enough space for wearing a base layer underneath.

Sizing information

Our water-repellent clothing protects you while cross-country skiing.
Water repellency is a material’s ability to shed water without absorbing it. 
Water repellency is achieved by treating the fabric’s exterior. 

Water-repellent properties

We recommend the three-layer technique. 
Layer 1: A second skin (technical base layer) that wicks away moisture to keep your skin dry.
Layer 2: An insulating layer (T-shirt, fleece) that provides warmth and wicks away moisture.
Layer 3: An outer layer (jacket) that protects against the elements (wind, snow, cold).

Adjust the number of layers to suit the intensity of your activity and the weather. Make sure your clothing is breathable.

How to stay warm and dry while cross-country skiing

To avoid feeling damp, wear breathable clothing that allows perspiration to evaporate. 
We measure our clothing’s evaporative resistance (RET) 
RET < 6: extremely breathable, ideal for high-intensity activity
 RET 6–12: very breathable, suitable for moderate-intensity activity
 RET 12–20: moderately breathable, not suitable for intense activity RET
 > 20: not very breathable and therefore not suitable for physical activity
 RET > 40: not breathable

Why is it important to wear breathable clothing when cross-country skiing?

Did you know that the wind makes you feel colder?An outdoor temperature of 0°C with a wind speed of 20 km/h (12 mph) feels like -10°C.Windproof features reduce windchill by blocking airflow and wind.

Why should you protect yourself from the wind?

Cross-Country Ski Pants

Brushed fabric balaclava with neoprene to protect the face.

This balaclava is designed for skiers and snowboarders of all levels in difficult weather conditions (wind, snow, and cold).

Stretch and flexible, wide, flat waistband for greater comfort and support.

Body mapping, 28% polypropylene on sweat areas: lightweight, water repellent.

Close-fitting cut helps keep body heat in.

Seamless design: less irritation, softer.

Worn as a second skin underneath your ski pants, these thermal leggings are ideal for your most intense sessions. 

Maximum wash temperature of 30°C. Delicate cycle.

These slim, close-fitting leggings have a narrower finish at the bottom of the leg to limit overlap with the socks. In this way, your sock slides easily over the top, avoiding any discomfort in ski or snowboard boots.

Feature of the BL 900 Tech leggings

Ski Leggings & Tights

When stationary: -8°C
When moving: -17°C
Limit temperature: -31°C

100% waterproof low cradle with a water-repellent upper for deep snow.

Tread with Snow Contact technology: sole materials and tread pattern for snow.

Grip

The position and depth of the 4 mm (0.16”) lugs provide traction on snow.

Traction

Laces cover the whole upper. Boots open fully, they’re quick and easy to put on!

Easy opening/closing

Designed for shoveling the driveway, getting around town or snowshoeing. Built for warmth and protection in temperatures low as -31°C.

Removable Sole

comfort temperature

Outsole Technology

Boots Type

Foot Width

Boot Height

Tightening Type

The warm, insulated lining effectively protects from the cold in temperatures as low as -31°C. Lab and field tested with hikers. We approved the comfort temperature both at rest and while walking, as this can vary significantly: -8°C when stationary and -17°C when moving. We also considered how different people feel the cold differently.

Are these boots warm enough for winter hikes?

A 100% waterproof mid-height inner shoe protects the part of the foot most in contact with the snow. The textile upper is water-repellent and warm for effective protection against cold and snow.
The seams that join the inner shoe and the upper are not waterproof. In very deep snow, over time water can get in through the seams resulting in wet feet.

How do these boots protect from outdoor conditions?

Traction depends on the number and shape of the lugs. The grip depends on the materials of the sole and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boot. 
Grip prevents the boot from slipping and skidding on smooth ground or in demanding conditions (rain, snow, and ice).

What is the difference between traction and grip?

The Snow Contact soles are designed for maximum comfort and grip for hiking on snow. The 3.5 mm (0.14“) lugs are spaced strategically for optimal grip when hiking on snow. They provide optimal grip on hard snow and evacuate excess water to prevent you from slipping.

How much grip and traction does this boot provide?

The material and tread of Snow Contact soles are specifically designed for optimal grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding crampons to your boots is the only way to ensure optimum safety.

What are the advantages of Snow Contact technology?

This product was lab-tested by our engineers to ensure your total satisfaction. We tested the following elements: tear resistance of eyelets and straps, bonding, toxicology, abrasion resistance of outsole and upper components, and accelerated aging.

Will my boots withstand regular use over the long term?

To stay warm when hiking in the winter, we recommend the following principles: 
Warmth: wear warm socks (ideally with a good percentage of wool).
 Breathability: choose socks based on the intensity of the hike and, to minimize moisture, make sure they’re breathable.
Boot height: the height of the sock should correspond to the height of the boot—for more protection, choose higher socks.

How do I choose the right footwear for hiking in the snow?

Water repellency is a fabric’s capacity to make water run off its surface without being absorbed. The fabric does not soak up water and stays light, breathable, and warm. Water repellency is achieved by treating the fabric’s exterior. This treatment needs to be reapplied throughout the product’s lifetime. Products for this purpose (spray or liquid) are available in our stores.

How to preserve the technical qualities of the boots

Boots can become heavy through condensation and perspiration if you wear them in wet conditions.
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing the newspaper regularly. The paper will absorb the moisture and dry them faster.
Never place your boots too close to a heat source. Leave them in a warm, dry, and ventilated place.

How to dry the inside of your boots

Men's Hiking Shoes

Merino wool offers a good balance between warmth and compactness.

Wool fibre with polyamide for added strength.

Durability

Ultra-fine (18.5 microns), super soft merino wool. Does not itch.

Softness

The highly absorbent nature of wool helps keep the head dry.

This merino wool beanie is designed to keep you warm during your winter hikes and everyday errands.

Reinforced fibre for lasting durability. Uses a new yarn structure in which a polyamide yarn forms a thin sheath that protects the merino wool fibres against friction and cuts.
This component weighs 155 g/sqm.

How was resistance designed?

Winter Hiking Gear

Breathable and waterproof to keep your feet dry.

Traction on snow thanks to the location and depth of the 5 mm lugs.

Mid-height upper with 2 hooks on the top of the upper for good support.

Warm and comfy, they are ideal for city streets and snowshoe trails. Keep your feet toasty and dry.

Type of Shoes

Shoe Height

Options

Playing Surface

With a limit temperature up to -31°C, the warm and insulating materials provide good protection against snow and cold. Lab and field tested with hikers. We also verified the comfort temperature both at rest and walking because this varies a lot: -8°C when stationary and -17°C when moving. We considered how men and women feel the cold differently.

These warm, waterproof boots are ideal for snowshoeing

A membrane ensures optimal water resistance. A membrane is a very fine component (between 5 and 25 micrometres) affixed to the inside of a fabric that prevents water from infiltrating while letting moisture escape. These boots keep your feet warm and dry. The sole insulates against contact with snow.

How do my boots protect me from outdoor conditions?

Thermal comfort is a balance between warmth and breathability. Too much heat or not enough breathability lets moisture accumulate and cold set in. A membrane prevents water infiltration on one side and lets moisture escape on the other.

Breathable boots for optimal thermal comfort

We made sure that your boots are waterproof by conducting laboratory tests to simulate walking with the boots half submerged in water. We also conducted field tests to measure wear and aging. 

Are my boots 100% waterproof?

The boot’s traction depends on the number and shape of the treads. The grip depends on the materials of the sole and the tread pattern, like car tires. Traction optimizes propulsion, prevents slipping when going uphill, and stabilizes the boot. 
Grip prevents the boots from slipping and skidding on smooth ground or in demanding conditions (rain, snow, and ice).

The SnowContact soles are designed using a specific component and lug pattern (5 mm) to provide the best possible grip and traction. Snow Contact soles are more effective on snow than traditional soles. When walking on ice, adding crampons to your boots is the only way to ensure optimum safety.

What are the advantages of SnowContact technology?

The support provided by your boots is essential for your walking comfort. Good support optimizes your ascent and descent over hilly terrain, prevents your feet from sliding in the boots, and reduces blisters. These boots save you energy, reducing fatigue. This is especially important when snowshoeing.

Why is support important in a hiking boot?

We designed these boots for hiking on snow, with or without snowshoes. The upper of the shoe (mid-height) combined with gaiters (external or integrated in the pants) helps keep snow out. The support and rigidity are suited to snowshoeing.

Are your boots suitable for snowshoeing?

Will my boots withstand regular use in the long term?

We designed these shoes as part of the ideal outfit for hiking in cold weather. No more waiting for ideal weather or taking everything with you in your backpack. Now you can travel light!

The perfect outfit for hiking in cold weather

Boots can become heavy if you wear them in wet conditions (through condensation and perspiration).
If your boots are very wet, remove the insole and fill the upper with balls of newspaper, changing them regularly. The paper will absorb the moisture and dry them faster.
Never place your shoes too close to a heat source. Leave them in a warm, dry, and ventilated place.

Brushed fabric on the inside and comfortable at temperatures down to -10°C

Water-repellent fabric: lets water slide off the surface without absorbing it

Semi-elastic waist and ankles keep snow out.

Made from a stretch fabric, the pants allow you to move with ease.

Two hand-warmer pockets at the front and two back pockets

Pockets

Hiking pants with brushed fabric on the inside. Ideal for occasional hikes in temperatures down to -10°C. 

The inside of these brushed fabric pants traps air and uses it to insulate you from the cold. This keeps your body warm. Thermal comfort is tested and validated at temperatures down to -10°C.

Are these pants breathable?

The thermal resistance test measures the loss of heat between the body and the outside, indicating the insulating properties of the product. It’s carried out on a thermal hand using sensors that measure body heat.

How is thermal comfort measured?

Stopping snow from getting into your hiking pants keeps your legs comfortable and protected. With semi-elastic waist and ankles, these pants keep snow out so you stay comfortable.

Sports/

Hiking & Camping/

Hiking Gear/

Hiking Clothes/

Hiking Pants/

Men's Hiking Pants/

quechua

Men’s Warm Hiking Pants with Membrane, NH 900