This one-size case can be used to protect all ski goggles.

Compatibility

Easy maintenance

Wide opening makes it easy to store or remove your goggles.

Easy opening/closing

The lens of your ski goggles is never fully scratch-resistant but using this case provides the proper protection.

Condition

Skill Level

With Protection

Number of Pockets

Type of Cover

reflective

Weather Conditions

Waterproof

Foldable

Number of Compartments

Main Material

Fastener Type

Remember to protect your goggles and the lens from scratches by using the microfibre Wedze case before and after use. The material is perfect for keeping your ski goggles scratch-free. This case also cleans your lens!

Microfibre case

Compatible

Kids' Ski & Snowboard Goggles

Head size adjustment wheel. Bowl design for more stability.

Stability

12 holes to aerate and evacuate humidity.

Ventilation

ABS construction type, 520 g (1.1 lb) in size M.

Lightweight

Complies with EN1077:2007 standard (class B). ABS shell.

Impact protection

Inner hat with large mesh surface for good thermal regulation.

Warmth

This robust helmet was designed for snowboarding and skiing, particularly freestyle. 

Adjustable Helmet

Ventilation Zippers

Frequency

Weight (g)

Season

helmet compatible with

protection technology

material of the exterior shell

type of chin guard

helmet shape

removable foams

number of aeration points

Bluetooth Connection

RECCO system

Style

Detachable Visor

The standard EN 1077:2007 category B is a European standard that applies to helmets used for cranial protection during downhill skiing or snowboarding. This standard tests the ability to absorb shocks and resist penetration.

A rigorous standard for protections

The Turnring is essential to the support of your helmet. This system can be easily and precisely adjusted at any time using the easily accessible dial that you can even use with your skiing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

A practical adjustment wheel to adapt the helmet to fit you

The venting system improves the thermal regulation of your helmet and reduces fog in your goggles. This type of design lets heat and humidity escape from the entire helmet and goggle area.

Passive ventilation system

The hard shell construction makes the helmet more durable and robust. The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. Change your snowboard helmet at least every 5 years, even if it hasn’t sustained any impacts.

Hard shell construction

Avoid putting a thick hat under your child's helmet as this will move the helmet away from their head and they won't be as well protected. 
Opt for a very thin beanie or balaclava. Helmets have good insulating properties. Often, nothing else is needed. Do not attach a camera to the helmet, as the extra weight can affect safety. The standard does not take into account any elements added to the helmet.

Safety

Make sure this product is right for you.
If not, you can return it in accordance with our terms and conditions, i.e. with the instructions, labels and, if applicable, the original packaging. 

Product returns (specific product: personal protective equipment).

The size of the FS 300 helmet is slightly different from other Wedze helmets. It’s a bit shorter at the forehead. Check when trying them on.

Sizing

Helmets

Compact and fits easily in a pocket or backpack.

Compact design

This simple, fleece, neck warmer is designed to protect your neck from the cold this winter.

Maximum washing temperature 30°C. Normal cycle.

Reversible

This Firstheat model is also available in a hat version.

Outfit

Ski Neck Warmers & Balaclavas

Soft fleece balaclava for warmth and comfort.

Need protection for your head? This balaclava is designed just for you!

Breathability

Windproof

Water-Repellent

Wearing a balaclava is also more hygienic if you rent or borrow a helmet.

Hygiene

Cut short in back to make it comfortable to wear with a ski jacket. This prevents added layers that can limit freedom of movement while skiing.

Cut of the balaclava

clearance

Complies with EN1077:2007 standard (class B). Lightweight In-Mold structure.

Head size adjustment dial, full coverage.

6 holes and ventilation channels for breathability and moisture management.

410 g in size M. The lightest helmet in the range.

Ear pads and thick hat in a brushed material.

Ease of use

Warm, well-ventilated liner with full coverage.

User comfort

Developed for regular skiers looking for a light, comfortable, ventilated helmet that they’ll forget they’re wearing. 

Intensity

Wedze/Quechua helmets and goggles are designed to form an complete unit and prevent gaps between the top of the helmet and the goggles.

Use the adjustment dial to secure your helmet. The dial can be easily adjusted while wearing gloves. It also provides comfort and maximum safety. Turn the dial to the right to tighten and to the left to loosen.

Tightening dial

This type of structure, known as In-Mould, features a polycarbonate outer shell that is moulded directly to the EPS liner. The inner EPS liner absorbs shocks in the event of a collision. The whole thing is extremely lightweight. The In-Mould construction is more sensitive to everyday impacts. We recommend changing your ski helmet at least every five years or if it has sustained a significant impact.

In-Mold construction

Measure the circumference of your head (from the middle of your forehead to the top of your ears) and choose the right size. When trying on the helmet, you should not feel any discomfort. If the helmet does not have a visor, try it on with a pair of goggles: There should be no gaps between the two.

How to choose the right size and trying on your helmet

For your safety, your ski helmet must be properly adjusted:
- The head circumference must be adjusted using the tightening dial.
- The chin strap must be correctly adjusted. You should be able to fit two fingers between the strap and your skin. If it is not adjusted properly, the helmet will not protect you as it should.

Adjust your helmet once you have the right size

We recommend replacing your ski helmet at least every five years unless it has sustained a significant impact in the meantime. In the event of a strong impact, the helmet must be replaced: even if it is not visible, the internal material may be damaged and your helmet will provide less protection.

When should you replace your ski helmet?

Avoid wearing a hat, as this will create a gap between your head and your helmet and reduce your protection. If necessary, opt for a very thin balaclava designed for this purpose. 
Avoid putting a camera on the helmet, as this will compromise your safety. The standard does not take into account any elements added to the helmet.

A helmet keeps you warm: it is not necessary, and even discouraged, to wear a hat underneath

Helmets used for head protection when downhill skiing and snowboarding are required to meet the European standard EN 1077:2007. This standard ensures that helmets absorb shocks and are resistant to penetration. There are two categories:
- Class A: protects the top and back of the head, as well as the ears and the side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

EN 1077 standard

Make sure this product is right for you before purchasing. If it is not suitable, you can return it under the following conditions: i.e. with the instructions, labels and, if applicable, the original packaging. it can be refurbished. 

100% UV protection, S1 screen for bad weather.

Sun protection

Field of vision

10 mounting brackets to clip onto the frame.

With G 900 masks, cylindrical or spherical.

Anti-fogging

Clips easily onto the frame, so you can change it quickly.

This poor weather cylindrical lens is compatible with our G 900 mask. It offers very good visibility and a wide field of vision. 

Strap Type

Technical Lens

Field of Vision

strapping

fogging treatment

Glass Category

anti-uv

Case Type

With Case

Diving Mask Type

The double lens and the anti-fog treatment are highly effective. Combining G 900 masks with the ventilated frame allows you to ski in all weathers, fog-free. Please note, to maintain the coating, ensure you never rub the inside of the lens to clean it, which could alter its effectiveness: only dab it.

Anti-fogging treatment

This one-size pouch can be used to protect all ski goggles.

The lens of your ski mask is never fully scratch resistant, but this case will provide proper protection.

Protect your goggles and lens from scratches by using the microfibre Wedze pouch before and after use. The material is perfect for keeping your ski goggles scratch-free. This pouch also cleans your lens!

The main yarn used for the sole is 38% wool.

Medium thickness. Recommended for ski touring.

Precision

Extremely fine woollen yarn + polyamide for excellent moisture wicking.

Moisture management

Elastic ankle area for perfect positioning on the leg.

Anatomic design

These socks are designed for demanding skiers and snowboarders looking for the benefits of wool!

reinforced area

height of the sock

thickness of the sock

reduced chafing

silicone

moisture management

anti-slip

touch

shoes with left or right mark

Elastic

Packaging

The high percentage of wool delivers durability, insulation, and high moisture absorption.
The elastane keeps the sock snug against your feet.

Composition

Medium-thickness socks are recommended for ski boots with a medium to narrow shell.
Ideal for all your ski touring expeditions.
Toe box for greater comfort.
Light reinforcement on the shin and ankles.

Features

This ski sock prevents discomfort. The seams never sit on a pressure point.

Ergonomic design

All our sock sizes cover 3 or 4 shoe sizes. The elastane helps the socks mould to your feet and stay in place. Foot length, size, and volume vary from person to person: that’s why it’s important to try your socks on before going skiing.
We always recommend choosing slightly small over slightly large socks.

Choosing the right sock size

The size chart for this sock is more precise than for other models in the range: One sock size covers three foot sizes instead of the usual four. This model also offers asymmetrical feet (differentiated right and left foot) for a perfect fit.

This sock is made with an anti-friction yarn.
Blisters are generally caused by socks, shoes, or foreign objects chafing feet. Humidity also plays a role, as it makes skin more vulnerable.
Chafing is reduced when the sock stays in place.
Some of our socks have anti-friction yarn to reduce irritation.
These socks do not provide 100% protection from blisters.

Reduce blisters

Our ski socks are guaranteed for 2 years.
Our commitment: To offer you long-lasting products that you can use for all your winter sports. The products we love the most are those that have had many adventures, with many more to come!

Warranty

Ski Socks

Waterproof membrane and water-repellent outer fabric.

Abrasion resistance

Beat the cold in style with these beautifully designed ski mittens. They will keep your hands warm on the slopes.

abrasion 

Reinforced Palm

Stitching Type

leash

Tightening Type

An elastic drawstring goes around your wrist so you can remove the gloves on ski lifts without losing them.

Loss prevention system

Simply pull the wrist strap with the opposite hand.

Easy to put on

Air dry, but especially not on a radiator!
These gloves contain leather, and leather detests water: don’t wash them, even by hand, to avoid damaging them.
To keep them flexible and in the shape, hydrate the leather with a suitable balm, like one you would use on your own skin.

Leather care advice

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier, making the product waterproof. The product’s exterior materials are also treated for water repellency. 
In extremely wet conditions, a glove with a membrane cannot be as "waterproof" as a glove made out of "rubber" type material.

Waterproof membrane

All Wedze gloves and mittens have a water-repellent treatment that makes water slide off the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water-repellent. To remain effective, this treatment must be reapplied every 2 to 3 washes with specific products that are available in our stores.

Water repellency

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h, the temperature will feel like -10°C. Windproof features reduce windchill due to wind speed or the relative speed of your activity.

Snowboard Gloves & Mittens

One size, all ski goggles can be protected in this case

The lens of your ski goggles can never be too scratch- or crush-resistant. This will protect it. 

The thermo-compressed case is ideal for storing your goggles and protecting them from crushing in your backpack while skiing.

Thermocompressed case

The size of the B 500 thermocompressed cover is compatible with all ski goggles on the market.

Complies with EN1077:2007 standard (class B). ABS construction for strength.

Adjustment dial that goes around the entire head.

Goggles locked with 2 tab fasteners built into the helmet

Recessed ear protectors prevent ear compression

A ski helmet for young intermediate-level skiers looking for excellent support and optimal comfort for long days on the slopes.

Loft

The adjustment dial is key to keeping your child’s helmet secure. The dial allows for easy and precise adjustments, even with gloves on. It also provides maximum comfort and safety. Turn the dial to the right to tighten and to the left to loosen.

Adjustment wheel

The helmet has an injection-moulded, ABS outer shell to withstand powerful impacts. High resistance to bumps and knocks. The internal Epos skullcap absorbs impact during collisions. We recommend changing your kid's ski helmet at least every 5 years unless it has sustained a significant impact in the meantime.

ABS structure

The European standard EN 1077:2007 applies to helmets used for cranial protection during downhill skiing and snowboarding. The standards test the helmet’s ability to absorb shocks and resist perforation. The two categories are:
- Class A: Protects the top and back of the head as well as the ears and side of the head.
- Class B: Protects the top and back of the head but does not cover the ears.

Measure your head circumference (from the middle of the forehead and above the ears) and choose the right size. When trying it on, there should be no discomfort. If it has no visor, try the helmet with the mask: there should be no gap between the two.

wedze

Fine Weather Interchangeable Ski Goggles, G 900 C HD