Name: Women’s Waterproof and Windproof Sailing Jacket, 100
Price: 52.5 CAD
Availability: OnlineOnly

Go to search
Go to content
Go to footer

Women's Waterproof and Windproof Sailing Jacket, 100 1/7

Women's Waterproof and Windproof Sailing Jacket, 100 2/7

Women's Waterproof and Windproof Sailing Jacket, 100 3/7

Women's Waterproof and Windproof Sailing Jacket, 100 4/7

Women's Waterproof and Windproof Sailing Jacket, 100 5/7

Women's Waterproof and Windproof Sailing Jacket, 100 6/7

Women's Waterproof and Windproof Sailing Jacket, 100 7/7

Waterproof
100% taped seams. 2-layer coating. 5,000 mm Schmerber
Windproof
Fabric specially coated to reduce the cooling effect of the wind.
Pockets
3 closed pockets, including 1 inside (non-waterproof pockets).
Breathability
Highly breathable coated fabric (RET < 12) to reduce condensation.
Water repellent
Especially treated so water slides off the fabric surface.
Water resistance
Zippers resistant to salt water and sea air.

Description

Design details

Water resistance
We measure a fabric’s resistance to water pressure in mm of water column (based on the ISO 811 standard). The higher the water pressure a fabric can withstand, the more waterproof it is. Waterproofing ratings: Component resistant to water pressure of 5,000 mm before and after aging (5 washes). This equates to 5,000 Schmerber average pressure exerted by the water during rain. The jacket’s waterproofness was tested in a rain shower with 60 litres of water/m²/hour for 2 hours.
Jacket waterproofing
- High collar - Injection-moulded plastic to avoid salt oxidation - Water-repellent components (water runs off the fabric) - 100% taped seams - Central opening features a flap with a drainage channel for optimal waterproofing
Hood
The hood is attached and adjustable for height and depth. It does not tuck away into the collar. Visor with a headband to provide a good level of protection and a better hold. The high neck effectively protects the neck.
Pockets
2 zippered pockets on the front to put your hands or items and 1 inner right-chest pocket with hook-and-loop fastening. Note: The pockets are not waterproof.
Front zipper
The full-length zipper includes an inner flap that protects you from wind and water, and the collar has a soft flap to shield your chin.
Breathability
To find out if a fabric is breathable, we measure its resistance to evaporative heat transfer (RET). The lower the fabric’s resistance, the more moisture is evaporated, and therefore the higher the fabric’s breathability. For example: RET < 9 = very breathable; RET 9–12 = breathable. This jacket has two components with the following RET values: > more resistant fabric: RET < 12 (or 3621 g/m²/24 h) Lighter fabric: RET < 8 (or 2972 g/m²/2)
Water repellency
This jacket stays lightweight and breathable in wet conditions because the treated fabric repels water instead of letting it soak in. The water-repellent properties are achieved with a treatment applied to the external side of the fabric, but in practice these properties can be altered. To revive it, simply tumble dry the jacket for 10 minutes on the lowest heat setting.
Washing the jacket
Wash sparingly to help maintain the jacket’s water-repellent properties. Close all zippers and flaps, empty all pockets, and turn the jacket inside out. Select a synthetics cycle (30°C–40°C) and use regular detergent. Do not use fabric softener or bleach, as these can damage the coating. Always run a full or extra rinse cycle.
How to reactivate the jacket’s water repellency
Drying is a crucial phase in reactivating the water repellent treatment. First, lay the garment flat on a drying rack. The heater? Forget it! Once dry, put it in the tumble dryer on a short synthetics cycle (10–15 minutes), then turn it right side out. Caution: Avoid over-drying.

Raw material	81%
Manufacturing	4%
Packaging	1%
Distribution	6%
Use	5%
End of life	3%

Raw material	81%
Manufacturing	4%
Packaging	1%
Distribution	6%
Use	5%
End of life	3%

Women's Waterproof and Windproof Sailing Jacket, 100

How to get it

Features

Description

Design details

Specifications

Details

EU product safety contact

Usage & care

Environmental impact

Carbon footprint

Description

Design details

Specifications

Details

EU product safety contact

Specifications

Details

EU product safety contact

Usage & care

How to use

How to repair or replace

2-year warranty

Care instructions

Cleaning

Environmental impact

Carbon footprint

Specifications

Details

EU product safety contact

How to use

How to repair or replace

2-year warranty

Care instructions

Cleaning