Women’s Leather Hiking Boots – MT 500

Name: Women’s Leather Hiking Boots – MT 500
Availability: InStock

Are you looking for authenticity? A leather shoe that will last for years? From the lining to the insole, everything is leather. Made with a Vibram sole.

ID 8786160

Sold and shipped by

How to get it

Traction
100% Vibram rubber sole with high-performance grip and traction.
Waterproof
Waterproof, breathable membrane (6 hours of walking in the rain).
Abrasion resistance
Leather upper and stone guard on the forefoot, leather for more durability.
Fit
High upper, two high hooks, and one secure blocker hook.
Foot motion
Flexible sole makes walking more comfortable on easy trails.
Cushioning
Sole heel made with a long-lasting cushioning material (polyurethane).
Weight
580 g (20.5 oz.) per shoe in size 8.

Description

Design details

European-made. All of our Forclaz boots are manufactured in Europe.
These hiking boots are manufactured in Romania, at the Grisport factory that specializes in hiking boots. This factory uses exclusively water-based adhesives, without chemical solvents. Most materials are of European origin.
Dope dyeing
Dyeing fabrics uses a lot of water, chemical products, and energy. But we love colour. We use the dope-dye technique, where powdered pigments are added as the yarn is produced instead of soaking it in dye baths. This reduces consumption and wastewater discharge from colouring our fabrics.
Recommended use
Made for hiking on moderate-altitude terrains and/or an all-terrain trail. May be suited for some short, more technical trails: crossing scree, snowfields, and elevation gains.
Vibram technology for our soles
The grip of our soles is Vibram-certified. In the mountains, the conditions and terrain can change quickly. Soles must be versatile in order to handle stones, to avoid slipping on surfaces, and to maintain grip on muddy slopes. The stud design was specifically developed by our team and the experts at Vibram. Tried and tested
Pros and cons of this leather model
Benefits: - supple leather. - the durable, waterproof leather prevents water from running across the boot by repelling and absorbing it. - breathable leather (natural pores of leather skin); less so than a synthetic boot in high heat. Nubuck leather is used for greater breathability, but is also more sensitive to rain. Drawbacks: - it needs to be cared for, hydrated, and treated to remain waterproof.
These boot’s waterproof level
This boot has been tested and validated for 10,000 flexes, equivalent to a 15-km (9-mile) walk, in water reaching the mid-upper. This guarantees a good level of waterproofing. Our assessment indicates a level of 3/5, or 6 hours of waterproofing when hiking in the rain. The details of our waterproof assessment tests are below.
Make this boot’s waterproofing last longer It’s a question of the right accessory and a bit of elbow grease!
A waterproof grease is recommended to nourish leather and to stop it from drying out, make it waterproof, and protect against stains.
Increase your boots’ waterproofing with gaiters
Waterproofing on boots is often compromised when water seeps in at the collar. To keep your feet dry for longer, we recommend wearing waterproof gaiters or mini-gaiters to keep water, pebbles, and sand out. Ref. number: MT 500 Trekking Gaiters
Maintain your boots in 6 steps
1/ Remove the laces to avoid smearing them with grease. 2/ Dry brush them to remove dust and any particles stuck on the leather. This is essential so dirt doesn’t get stuck under a new layer of grease. 3/ Grease the leather with a brush; rub it deep into all the seams and gaps. 4/ Wipe off the excess grease with a soft cloth. 5/ Rub gently to make them shine. 6/ Replace the laces.
Waterproofing your leather boots with a reactivating spray
1. Use a brush and/or sponge to clean the boots and remove any dirt or mud. 2. Next, leave to air dry away from a heat source. 3. Finish by applying a water protection booster spray to maintain optimal water-repellent properties of the upper and to prolong the lifespan of your boots. Link below for the applicator, also available online:
Choosing your size is important.
For hiking, opt for one size larger for optimal comfort on the descent and to prevent toes from touching the tip of the shoe. Tip: keep your toenails short and check that your lacing prevents your foot from sliding forward inside the boot before heading downhill.
5 levels of waterproofing
We tested five levels of waterproofness: 2,000 flexes (approximately 4 km/2.5 miles, 30 minutes of walking) 10,000 flexes (approximately 10 km/6 miles, 3 hours of walking) 30,000 flexes (approximately 15 km/9 miles, 6 hours of walking) 50,000 flexes (approximately 20 km/12 miles, 8 hours of walking) 100,000 flexes (approximately > 20 km/12 miles, 24 hours of walking)
Waterproofing test carried out on this model
Our boots are laboratory tested by 2 consecutive tests. Test 1: We test the effectiveness of the membrane immersed in water under air pressure. We simply check for any bubbles on the surface like a pierced air chamber. Test 2: We use mechanical arms to simulate walking. The assembled shoes are immersed halfway in water and flexed thousands of times to ensure that the inside remains dry and is therefore waterproof.
Try your boots out step by step
How to choose your boots: 1. Try on both boots standing up while wearing your hiking socks. 2. Tighten the laces correctly. 3. Check the following two areas of comfort: the base of the heel and the front part of the foot while standing on a downward incline. 4. Walk around with the boots on. 5. Try on several sizes and models. 6. Break your shoes in gradually during your first few hiking trips.
Main laboratory tests
Laboratory tests were conducted for following elements: - tearing of hooks and eyelets - adhesion of the sole - toxicology - UV resistance - sole and upper abrasion tests - accelerated aging

Women’s Leather Hiking Boots – MT 500

How to get it

Features

Traction

Waterproof

Abrasion resistance

Fit

Foot motion

Cushioning

Weight

Description

Design details

Specifications

Details

Composition

EU product safety contact

Usage & care

Description

Design details

Specifications

Details

Composition

EU product safety contact

Specifications

Details

Composition

EU product safety contact

Usage & care

How to use

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Storage

Cleaning

Specifications

Details

Composition

EU product safety contact

How to use

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Storage

Cleaning