Last quantities

Women’s Waterproof Hiking Shoes – MH 100 Grey/Blue

Name: Women’s Waterproof Hiking Shoes – MH 100 Grey/Blue
Availability: InStock

Protect your feet with comfortable cushioning along the entire length of the sole, a stone guard for your toes, and a waterproof membrane to keep feet dry.

ID 8397090

Sold and shipped by

How to get it

Traction
Non-slip rubber outsole with 4-mm (0.15”) gripping treads.
Robustness
Durable rubber stone guard at the front protects your toes.
Waterproof
Waterproof, breathable membrane: your feet stay dry for 3 hours in any weather.
Cushioning
Full-length cushioning with the EVA midsole.
Lightweight
337 g (0.75 lb.) in size 6.

Description

Design details

How often do you hike and at what intensity?
Our products are classified based on performance and features for 3 mountain hiking levels: - Occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10 km (6 miles), and less than 700 m (2,296 ft.) in elevation gain. - Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km (6 to 12 miles), and 700 to 1,200 m (2,296 to 3,937 ft.) of elevation gain per outing. - Intensive: more than 20 times a year, more than 6 hours, more than 20 km (12 miles), and 1,200 to 2,000 m (3,937 to 6,562 ft.) of elevation gain per outing.
Grippy sole
Certified sole grip. To be certified, the shoes must pass lab tests to assess their grip rate on different surfaces (smooth, rough, dry, wet). To validate these tests, we have a panel of representative testers evaluate the quality of our soles out in the mountains across 500 km (310 miles).
Waterproofing test
In a lab, the boot is immersed in water to mid height while on a mechanical arm that simulates walking. We use this test to determine how long and how far the boot can go and stay dry. The results are validated in the field and in the rain to ensure consistency.
Making waterproofing last longer
To keep your feet dry, we suggest wearing gaiters or mini-gaiters to protect the tops of your shoes and keep out water, pebbles, and sand. We recommend re-waterproofing your shoes twice a year using a waterproofing agent (search for “waterproofing” on www.decathlon.ca), which will help you restore the original water-repellent qualities and help prevent stains.
What size should I choose?
The most important thing is to try on several styles of footwear to find the one most suited to you! You can choose one size up from your usual size so your toes won’t bump the toe box when going downhill, as long as you still have the proper support to prevent friction. Tip: keep your toenails short and, before heading downhill, check that your laces are tight enough to prevent your foot from sliding forward inside the shoe.
Buying tips/how to try on hiking boots
Certain Decathlon stores have a test trail. 1. Try on both shoes, standing up, wearing your hiking socks. 2. Tighten the laces, making sure they’re evenly tightened. 3. Check two points: - your heel doesn’t lift up before the shoe when walking uphill. - your foot doesn’t slide and your toes don’t touch the front when going downhill. 4. Try on several sizes and models. Break them in gradually to adapt them to your feet.
Optimize your shoes: replace your insoles!
The original insole in your shoes is designed to fit most feet. Changing the insole may provide: 1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide warmth and/or cushioning. 3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.
How to avoid blisters
Blisters generally develop when the skin is weakened by friction. To prevent blistering, we recommend the following: - Choose a shoe in your size. - Wear suitable socks. - Tie and tighten your shoes properly. - Make sure you tighten or loosen your laces, especially before starting a climb or a descent. - Wear your shoes on a short trip for the first use.
Field tests
Hikers who are unaffiliated with Decathlon test all our shoes for initial comfort and comfort in use under the same conditions you encounter when hiking. This is done to further develop the product and evaluate it as objectively as possible, for your total satisfaction.
Lab tests
Laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, and accelerated ageing.

Women’s Waterproof Hiking Shoes – MH 100 Grey/Blue

How to get it

Features

Traction

Robustness

Waterproof

Cushioning

Lightweight

Description

Design details

Specifications

Details

Composition

EU product safety contact

Usage & care

Description

Design details

Specifications

Details

Composition

EU product safety contact

Specifications

Details

Composition

EU product safety contact

Usage & care

How to use

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Storage

Specifications

Details

Composition

EU product safety contact

How to use

How to repair or replace

2-year warranty

Care instructions

Usage precautions

Storage