Go to search
Go to content
Go to footer

10 mm x 60 m Climbing Rope - Klimb

Do you want to improve your outdoor skills? Try this highly durable rope! The 10 mm (2/5") diameter and light weight make belaying easier.

ID 8644398

Sold and shipped by

How to get it

Ergonomic grip
The sheath ensures a secure belay. Plasma treatment for greater flexibility.
Stretch
Guaranteed to absorb the energy of a fall throughout the life of the rope.
Lightweight
Lightweight yet durable. 65 g/m (2 oz/yd)
Abrasion resistance
32% sheathing and a knitted structure for increased long-term flexibility.
Ease of use
Climb-ready and coiled for immediate use

Description

Design details

Technical features
Number of falls: 8 Impact force: 9.4 kN Dynamic elongation: 29.6% Static elongation: 6.5% Sheath slippage: 0 Number of spindles: 48
Weight
65 g/m (2 oz/yd) Please note: Rope weights are set according to the EN 892 standard. For example, a single rope must hold 10 kg (22 lbs) for 1 minute under specific temperature and humidity conditions. This determines the rope’s actual weight, which is often greater than the weight given by the standard. The weight according to the standard is used to compare two ropes.
Plasma treatment
Special treatment makes the rope smoother.
Rope midpoint marking
For safety purposes, a black mark indicates the midpoint of the rope.
Made in France
All our ropes are designed and tested in Chamonix-Mont-Blanc, in the French Alps. They’re made in northern France by our manufacturing partner Cousin, expert ropemakers for 170 years.
Washing your rope
It’s important to properly care for your rope to reduce wear. We recommend the following: 1- Use a rope cover. 2- Wash off dirt under lukewarm water. Should stains persist and you want to wash the rope with soap, it is important to use a pH-neutral soap (such as Marseille or household soap) and then rinse thoroughly with clean water. 3- Air-dry away from sunlight and heat sources.
Storing your rope
Store in a cool, dry place away from direct light and corrosive agents. Never leave your rope in a car on a hot summer day.
Checking your rope
It’s important to check your rope regularly. Run it through your hands and inspect it metre by metre. This will allow you to spot any nicks, cuts, or weak spots. If you notice any abnormalities, if the core is visible, if the rope is deformed or if the rope has exceeded its fall rating, it must be replaced. Take safety seriously!
Rope length evolution
As they age, all climbing ropes shrink, usually by 2% to 5%. Usually, they get 2 to 5% shorter, but this can reach up to 10% depending on humidity, heat, falls, washing, etc. To decrease this effect, we calculate an extra margin of length when manufacturing our ropes, but sometimes this isn't enough. This is why we recommend regularly measuring your rope and checking the rope’s middle mark.
Certification
CE-certified rope according to the standard EN 892:+A1: 2016