Flexible EVA midsole for shock absorption

Cushioning

Outdoor Contact©-certified to reduce the risk of slipping on smooth surfaces

Grip

Waterproof inner membrane, guaranteeing 2 hours of waterproofing under the rain

Waterproof

Whether you're hiking or just out for a walk, the NH100 waterproof shoes are ideal for occasional outings in lowlands, forests or along the coast.

Frequency

Removable Sole

Shoe Height

Foot Width

Tightening Type

Place of Practice

Main Material

Certified sole grip. 
The boot must pass laboratory tests to define its friction coefficient on smooth surfaces.
To validate these tests, we assess the quality of our soles out in the field, by a panel of representative testers over 500 km.

What is Outdoor Contact© grip?

Our boots undergo an intensive test in the lab to guarantee their waterproofing. They are immersed and folded up in water up to a certain level, replicating real-life hiking conditions. This test ensures that your feet will stay dry for at least 2 hours, even in rainy or wet conditions.

How do we test waterproofing?

When walking in the forest, on the coast or on the daily, your feet are put through numerous constraints. Rubbing boots can be unpleasant, especially when you’re sweating, but the cold can be really lead to an uncomfortable hike if you don’t have adequate protection.

Why choose a good pair of socks?

A waterproof boot will always be less breathable than a non-waterproof boot. That's why the Hike 500 Mid and Hike 900 Mid mid-length socks are designed to wick away sweat and reduce chafing for this pair of boots.

Which socks should you choose?

- Cleaning mud off: Remove dry mud with a hard brush,
- Treating stains: Brush with warm water,
- Drying: Air dry until completely dry 
- Re-waterproofing: Spray a solution to restore water repellency.
View re-waterproofing spray without gas (8800346)

How to care for your shoes

How much does a boot weigh?

Men's Hiking Shoes

clearance

Non-slip rubber outsole with 4-mm (0.15”) gripping treads.

Traction

Durable rubber stone guard at the front protects your toes.

Robustness

Waterproof, breathable membrane: your feet stay dry for 3 hours in any weather.

Full-length cushioning with the EVA midsole.

Lightweight

These waterproof hiking shoes are made to keep you going regardless of the weather.

Skill Level

Weather Conditions

Outsole Technology

type of leather

Our products are classified based on performance and features for 3 mountain hiking levels:
- Occasional: about 10 hikes per year of about 3 to 4 hours in length, covering less than 10 km (6 miles), and less than 700 m (2,296 ft.) in elevation gain.
- Regular: about 20 outings per year. 4 to 6 hours, 10 to 20 km (6 to 12 miles), and 700 to 1,200 m (2,296 to 3,937 ft.) of elevation gain per outing.
- Intensive: more than 20 times a year, more than 6 hours, more than 20 km (12 miles), and 1,200 to 2,000 m (3,937 to 6,562 ft.) of elevation gain per outing.

How often do you hike and at what intensity?

Certified sole grip. To be certified, the shoes must pass lab tests to assess their grip rate on different surfaces (smooth, rough, dry, wet). To validate these tests, we have a panel of representative testers evaluate the quality of our soles out in the mountains across 500 km (310 miles).

Grippy sole

In a lab, the boot is immersed in water to mid height while on a mechanical arm that simulates walking. We use this test to determine how long and how far the boot can go and stay dry. The results are validated in the field and in the rain to ensure consistency.

Waterproofing test

To keep your feet dry, we suggest wearing gaiters or mini-gaiters to protect the tops of your shoes and keep out water, pebbles, and sand. 

We recommend re-waterproofing your shoes twice a year using a waterproofing agent (search for “waterproofing” on www.decathlon.ca), which will help you restore the original water-repellent qualities and help prevent stains.

Making waterproofing last longer

The most important thing is to try on several styles of footwear to find the one most suited to you! 
You can choose one size up from your usual size so your toes won’t bump the toe box when going downhill, as long as you still have the proper support to prevent friction.
Tip: keep your toenails short and, before heading downhill, check that your laces are tight enough to prevent your foot from sliding forward inside the shoe.

What size should I choose?

Certain Decathlon stores have a test trail.

1. Try on both shoes, standing up, wearing your hiking socks.
2. Tighten the laces, making sure they’re evenly tightened.
3. Check two points:
- your heel doesn’t lift up before the shoe when walking uphill.
- your foot doesn’t slide and your toes don’t touch the front when going downhill.
4. Try on several sizes and models.

Break them in gradually to adapt them to your feet.

Buying tips/how to try on hiking boots

The original insole in your shoes is designed to fit most feet. Changing the insole may provide:
1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 
2. More comfort: the insoles can also provide warmth and/or cushioning.
3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.

Optimize your shoes: replace your insoles!

Blisters generally develop when the skin is weakened by friction. To prevent blistering, we recommend the following:
- Choose a shoe in your size.
- Wear suitable socks.
- Tie and tighten your shoes properly.
- Make sure you tighten or loosen your laces, especially before starting a climb or a descent. 
- Wear your shoes on a short trip for the first use.

How to avoid blisters

Hikers who are unaffiliated with Decathlon test all our shoes for initial comfort and comfort in use under the same conditions you encounter when hiking. This is done to further develop the product and evaluate it as objectively as possible, for your total satisfaction.

Field tests

Laboratory tests were conducted to test the following elements: attachment of eyelets and webbing, assembly, toxicology, UV resistance, sole and upper component abrasion, and accelerated ageing. 

Lab tests

Women's Hiking Shoes

EVA fabric, 100% waterproof.
Taped seams. 

Compact design

S/M (360g/13oz.) to L/XL (400g/14oz.): put it in your bag and forget about it!

Comes with a bag.
Size: 18 x 20 x 2 cm (7.1 x 7.9 x 0.8”)

Compatibility

This backup poncho shelters you from a light shower when hiking.

Maximum washing temperature 30°C. Normal cycle.

Ventilation Zippers

sleeve length

Windproof

Pocket

Type of Length

Hood

Style

This poncho is available in 2 sizes:
157 to 173 cm (61.8 to 68.1”) in size S/M
174 to 190 cm (68.5 to 74.8”) in size L/XL
The snap opening makes this poncho easy to get on and off.

Fit and sizing information

For complete protection, we recommend wearing waterproof rain pants, such as:
NH 500 Rain Pants
on our website.

Additional product recommendations

EVA foam is not very resistant to tearing. We increased the thickness compared to the previous version and added reinforcements in high-pressure areas.

Good to know

Technologies: This garment was subjected to a shower test using 60 litres of water/sqm/hour for 2 hours. This test reproduces average rain shower conditions in the mountains.

Waterproofing 

Men's Hiking Jackets

Waterproof coating, 5,000 mm H2O (Schmerbers) | 100% taped seams

4 pockets: 2 zipped (hands), 1 watertight (chest), 1 hook-and-loop (inside)

Pockets

Full-length zipper makes it easy to put on. Available in sizes S to 4XL.

Anatomic design

Hydrophilic coating (RET = 12): reduces condensation | Mesh lining

Breathability

Designed for regular hiking on lowlands, in the forest or at the coast in rainy weather. 

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Closed Pocket

Number of Pockets

Precipitation

Ventilation

type of waterproofing

Playing Surface

Zipper Type

Schmerber

The waterproofness of a fabric, provided by a coating or membrane, is measured in Schmerbers or mm (pressure exerted by a column of water). The higher this number, the more waterproof the fabric. 
This jacket is designed with a waterproof coating: this component resists 5,000 mm of water (Schmerbers) before washing (equivalent to the pressure exerted by a 5,000 mm column of water).

Water resistance of the fabric

The fabric of this jacket is water-repellent, i.e., water runs off its surface without being absorbed. This keeps the fabric from soaking up water so the jacket stays lightweight and breathable. Water repellency is achieved by treating the fabric’s exterior. The main seams are also taped.

Fabric water repellency

Our fabric is extremely breathable (RET 12). 
Breathability is measured according to the product’s thermal evaporative resistance. This refers to its capacity to release perspiration during activity. The lower the thermal evaporative resistance (RET), the higher the fabric’s breathability.

RET < 9 = extremely breathable 
RET < 12 = very breathable 
RET < 20 = breathable 
RET > 20 = slightly breathable to not breathable at all

Fabric breathability

To maintain water repellency, we recommend regular reactivation.
Reactivate water repellency after three washes (remember to rinse thoroughly) or after using a dozen times in the rain.
You can reactivate the water repellency properties by warming the fabric: 
- in a dryer for 15 min. (synthetic cycle) - with a hair dryer, held 20 cm away from the fabric, moving back and forth twice over each section 
- with an iron on the delicate setting, steam function off, passing over each section twice

How to maintain the water resistance of your jacket over time

When we’re active, how much we perspire depends on the intensity and duration of the effort.If the fabric’s breathability is not right for your type of activity, sweat condenses inside the jacket.You will feel damp:This moisture is not rain soaking through the shell but condensation caused by perspiration.You need to choose your jacket according to the type of physical activity.This jacket is designed for the occasional one-day hike at a speed of 5 km/h.

Choose your waterproof jacket according to the intensity of your activity

For full protection against wind and rain, we recommend the NH 500 Rain Pants too. 

Other recommended products

Merino wool offers a good balance between warmth and compactness.

Warmth

Wool fibre with polyamide for added strength.

Durability

Ultra-fine (18.5 microns), super soft merino wool. Does not itch.

Softness

The highly absorbent nature of wool helps keep the head dry.

Moisture management

This merino wool beanie is designed to keep you warm during your winter hikes and everyday errands.

Condition

Type of Beanie

beanie compatible

Reinforced fibre for lasting durability. Uses a new yarn structure in which a polyamide yarn forms a thin sheath that protects the merino wool fibres against friction and cuts.
This component weighs 155 g/sqm.

How was resistance designed?

Winter Hiking Gear

Carrying comfort

1 main compartment with a double zipper | 1 deep outer compartment

Vol:10 L | Weight:145 g (5.1 oz) | Dim.::39 x 21 x 12 cm (15.4 x 8.3 x 4.7”)

Capacity

Durable, abrasion-resistant components and assemblies | 10-year warranty

Abrasion resistance

Easy access to the outside pocket by putting the bag horizontally when hiking

Ease of use

A 10-litre backpack for your occasional hikes on lowlands, in the forest or on the coast.

Volume (L)

Height (cm)

Depth (in cm)

Frame

Weight (g)

carrying comfort

adjustable height

water bladder included

rain cover

Foldable

Type of Bell

Width

Number of Compartments

Fastener Type

Thanks to your feedback, we improved the design of the 10 litre Arpenaz NH 50 Hiking Backpack.
We added a double zipper on the main compartment and a larger pocket bottom on the outside pocket. The aim is to not lose your belongings when opening your bag. 
And of course, the price hasn’t increased!

Your opinion is important to us!

The volume of each backpack is measured using a standardized method: the main compartment and all the pockets are filled with little balls. These balls are then emptied into a graduated container to get the equivalent volume in litres.

How is volume measured?

Put heavy items at the bottom. Pack your clothes around these items. Keep your waterproof jacket and/or fleece in an easy-to-access location. Place small frequently used items in the pockets (sunscreen, map, glasses, etc.). 

How to pack your backpack

At Decathlon, all of our Quechua backpacks are guaranteed for 10 years against normal product wear and tear. In the case of a defect, we recommend its repair, replacement, or a refund. The guarantee covers the components from the zip to the seams: more information can be found on our website.

Quechua backpack: 10-year warranty

The following components were validated in the lab: fabric, buckles, straps, foam, and zippers. For example, we test the fabric’s resistance to abrasion and tearing, colourfastness, and waterproofing. We also check the resistance of the construction using a dummy that reproduces a hiker’s movements to replicate several years of wear and tear.

Tested for optimal durability

1 - Loosen all the straps (straps, belt, and load adjuster straps).
2 - Put the backpack on.
3 - Tighten the shoulder straps.
4 - Adjust the load adjuster straps as needed.

How to adjust your backpack

The water-repellent components allow you to continue walking or hiking in light rain for short periods. Note: This backpack is not watertight or waterproof and does not come with a rain cover. 
To keep your belongings dry on longer walks or hikes, we recommend the following product: 10 L to 20 L Hiking Backpack Rain Cover (reference 8772113), which can be found on our website.

Waterproofing

Kids' Backpacks

There are 10 ways of wearing this product.

Flexibility

Ultra-fine (18.5 microns), super soft Merino wool. Does not itch.

This neck warmer made with merino wool protects you from the cold when trekking.

adjustable diameter

Packaging

Reinforced fibre for lasting durability: Uses a new yarn structure in which a polyamide yarn forms a thin sheath that protects the Merino wool fibres against friction and cuts.
The component’s grammage is 155 g/sqm.

Is this neck warmer sturdy?

Men's Neck Warmers

5-mm studs shaped for strong traction. Rubber sole with very good grip.

Durable rubber stone guards at the front and back. 

Waterproof, breathable membrane: your feet will stay dry for 6 hours.

Thick EVA foam midsole: comfort and protection from the ground.

Weblock system on the last 2 lace loops holds the midfoot and heel in place.

Suede leather on the forefoot adapts to your foot shape over time.

These waterproof shoes are designed for regular hikers. Take to the mountain trails with your feet fully protected and comfortable.

Season

Drop

Our products are classified based on performance and features for 3 levels:
- Occasional: around 10 hikes a year of about 3-4 hours, less than 10 km (6 mi) and less than 700 m (2,296 ft.) of elevation gain.
- Regular: about 20 outings a year of about 4-6 hours, 10 to 20 km (6 to 12 miles), and 700 to 1,200 m (2,296 to 3,937 ft.) of elevation gain.
- Intensive: more than 20 times a year, more than 6 hours, more than 20 km (12 miles), and 1,200 to 2,000 m (3,937 to 6,562 ft.) of elevation gain.

New high-performance sole with an exclusive rubber blend developed by our experts. More grippy, more durable. The sole was designed for grip using 3D simulations and then laboratory tested to assess the coefficient of grip on different surfaces and conditions. Field tests in the mountains allowed us to do the final validation with a panel of testers. 
30% rubber.

Sole: Outdoor contact

To keep your feet dry, we suggest you wear waterproof gaiters or mini-gaiters to protect the top of your shoes and prevent water from getting in, along with stones and sand.

We recommend you re-waterproof your shoes twice a year using a waterproofing agent (search for “waterproofing” on www.decathlon.ca), which will help you restore the original water-repellent properties and help prevent stains on the outside.

Extending waterproof performance

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in France. This location makes it a real meeting place for our teams and outdoor sports enthusiast. It’s the perfect spot for designing our mountain hiking products.

Product design: our outdoor experts

Certains magasins Décathlon sont équipés d’un parcours test.

1. Essayez les deux chaussures debout avec vos chaussettes.
2. Serrez les lacets en prenant soin de bien répartir le serrage.
3. Vérifiez deux points :
- le talon ne décolle pas avant la chaussure quand vous marchez en montée.
- le pied ne glisse pas et les orteils ne butent pas à l’avant en descente.
4. Essayez plusieurs tailles et modèles.

Utilisez-les progressivement pour y habituer vos pieds.

Tips

Waterproof shoes are less breathable than non-waterproof shoes. Mid-length socks like the MH 500, MH 520, and MH 900 Hiking Socks are great for absorbing perspiration and reducing overheating.

Which socks?

The original insole in your shoes is designed to fit most feet. Changing the insole may provide:
1. Improved support: some soles are preformed or reinforced to better support the arch of the foot. 2. More comfort: the insoles can also provide warmth and/or cushioning.
3. Longer life: restore the support and comfort of your shoes by replacing the insole each season.

Optimize your shoe Replace your insoles. 

- Leave to air dry.
- Remove dry mud with a stiff brush. 
- Clean marks using a brush and some warm water.
- Leave to dry.
- Spray with a re-waterproofing product to restore the upper’s water resistance.

Wide shape around the metatarsals provides more comfort for large feet.

100% rubber sole improves grip and traction.

Waterproof, breathable membrane (6 hours of walking in the rain).

Leather upper and forefoot guard for extra solidity and durability.

These waterproof, leather hiking boots are designed for comfort and support on easy trails.

Sports/

Hiking & Camping/

Hiking Gear/

Hiking Footwear/

Hiking Shoes/

Men's Hiking Shoes/

quechua

Men's Waterproof Hiking Shoes - MH 100 Grey