Good foot support at high speed on intermediate to advanced slopes.

Just one tightening buckle: makes installing and removing bindings child’s play.

Fast acting

Highly adjustable: fits a wide range of junior snowboarder boots.

Adjustable

Cushioning

Anatomic design

Conventional fastener: pump to achieve the required support. No limit.

Stability

Pair of bindings, 2 discs, 8 x 16 mm (0.63”) screws compatible with discs, 8 washers.

Capacity

For boards with normal inserts or Burton Channel (not Burton 3D-compatible).

Compatibility

Designed for young snowboarders, sizes 2 to 5, looking for a traditional binding with a quick and easy opening.

Condition

Skill Level

Attachment Type

Kids like to be able to get their bindings on and off without help, and their parents like it too. Two-buckle fasteners take longer to handle. A single buckle with an asymmetrical strap tightens more than enough, even for kids proficient at snowboarding at a mix of speeds with carved turns and jumps.

A word from the product manager

A single buckle tightens firmly at the ankle with an asymmetrical strap over the toes, needed for backside turns. There’s no easier choice for kids!

Single-buckle opening mechanism

The original settings suit a majority of users. But feel free to make adjustments:
- canting, spoiler, 
pre-drilled front ratchets. Adjust it forward (for sizes 4.5 to 6.5) or back (sizes 3 and 3.5). You will need to unscrew the binding.
- pre-drilled ratchet strap size.

Adjustment options

Can adapt to a kid’s body shape, but keep in mind that all snowboards have a recommended binding position (as marked on the binding inserts). A wider position lowers the rider’s stance on the board and improves stability. It also makes aerial rotations easier. On freestyle boards, the recommended stance width is generally wider than for all-mountain boards.

Stance, binding spacing

For piste/off-piste boards:
To keep feet closer together, move the binding forward only.
To move feet farther apart, move the binding backward. The idea is to get a little further back to improve piste performance on bends and float on powder snow. 
For freestyle boards (symmetrical): 
best to keep both bindings centred on the board.

How do I change the foot position on the board?

For freestyle riding, we recommend binding angles of +18° at the front and 0° at the back.
For on/off-piste use with all types of snow, we recommend +18° and -6°. The open back foot position helps keep the shoulders in line with the board.
In pure freestyle use, feel free to opt for fully symmetrical angles, e.g. +15° and -15°.
The choice of binding angle is very personal, so go ahead and test a few to find what suits your kid best.

How should I angle my snowboard bindings?

Disc bindings come with 4 screws, slide along a single axis, and generally have 5 settings. The setting is used to centre the boot on the snowboard and prevent the foot from extending too far over the edge of the board (so you won’t fall!). Make sure that your boot extends the same distance over both sides of the board. Rotate the disc 90° to increase or decrease the stance provided by the inserts. This means you won’t be able to centre the bindings laterally.

Remember to centre your boot on your snowboard!

The Burton snowboard brand has its own system for mounting bindings: the Channel. The binding is screwed onto 2 mobile inserts included with the board.
Our disc allows this binding to be mounted on the Channel.
However, the screws supplied with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You’ll need to buy Burton screws.

Compatibility with Burton Channel boards

Snowboard Bindings

100% anti-UV. Brown S3 lens for good vision in sunny and overcast conditions.

Sun protection

Essential anti-fogging, double screen with anti-fogging treatment.

Anti-fogging

Wraparound lens with Essential field of vision.

Field of vision

User comfort

From the entry-level range, we equip our ski goggles with dual lenses to reduce fogging and guarantee good visibility in good weather.

Ventilation Zippers

Strap Type

Technical Lens

Season

Compatible with prescription glasses

Weather Conditions

Field of Vision

glass composition

fogging treatment

Lens Colours

Glass Category

anti-uv

With Case

Tightening Type

Diving Mask Type

All our goggles are 100% anti-UV certified by the EN-174 standard. Goggles, which perfectly enclose the eyes and prevent any direct or reflected UV light from entering, provide the best protection.

UV Protection

S3 Sun is a dark lens that protects you from bright sunlight. 
We have selected a brown tint that offers good visibility in shaded areas or in the late afternoon when the sun is less bright.
Lenses are not scratch-resistant.

Sun S3 lens

Essential anti-fogging is a dual lens with treatment on the inside of the inner lens.
To ensure effective ventilation, do not block the vent with a neck warmer, for example.
Do not rub inner surface of lens. Instead, dab it carefully to preserve the anti-fogging treatment for as long as possible. Dry goggles thoroughly every night.

Essential anti-fogging system

Dual screen reduces condensation. The air trapped between the lenses creates a layer of thermal insulation. The thermal shock between the inside and the outside of the goggles is lower, limiting fogging on the goggles’ inner lens. The inner lens also has an anti-fog treatment.

Double lens

Wraparound dual lens, made of polycarbonate for the outer lens and cellulose polycarbonate for the inner lens, both cut to fit the shape of the goggles.

Wraparound lens

There is a vertical and a horizontal visual field. The G 100 has an Essential field of vision, providing good, safe, visibility on the sides.

All Wedze ski goggles are designed to fit perfectly with Wedze ski helmets.

Ski helmet compatibility

The padded sides and the shape of the goggle skirt leave space for the stems of eyeglasses. G 100 ski goggles in size L can be worn with glasses (maximum width of 135 mm).

Compatibility with prescription glasses

40 mm-high polyamide, polyester, and rubber strap.

Strap

The EN -174 standard is a European standard applied to goggles used for eye protection when downhill skiing or during similar activities, such as snowboarding. The ANSI standard, the American standard, has more stringent requirements for resistance to shocks and impact.
These ski goggles pass both these standards.

CE - EN -174 and ANSI Standard

Moisture causes fogging. To prevent fogging, keep the foam dry by not placing your goggles on your head or helmet. Falling face down in the snow can also cause your goggles to fog up. Dry your ski goggles completely overnight to get rid of all traces of humidity so you can hit the slopes with bone-dry goggles the next day.

To avoid fogging

The size of the goggles is based on head size
Up to 55 cm, choose size S (formerly S/M); from 56 cm up, choose size L (formerly L/XL)

Two sizes

Kids' Ski & Snowboard Goggles

60 g/sqm wadding, brushed polyester lining, comfort temperature down to - 4°C.

Warmth

5,000 mm membrane (Schmerber) and partially taped seams.

Waterproof

Semi-elastic waist, belt loops, strap loops.

Water-repellent exterior fabric does not get waterlogged.

Water repellent

Pockets

Elastic gaiters in the lining keep snow out.

Limits snow entering

Ready to have a go on the slopes? These warm and comfortable waterproof pants will protect you from bad weather. The gaiters go over your boots.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 30°C. Very delicate cycle.

Frequency

type of lining

reinforced area

Number of Pockets

belt height

Type of Brushing Boots

Place of Practice

modular

Windproof

Pocket

RECCO system

type of waterproofing

Type of Length

Type of Bell

Schmerber

Main Material

With Straps

If you’re looking for better support on the shoulders, you’ll find loops for adding straps inside the waistband. The straps can be found on our website.

Straps

For warmth, we used insulating fill (60 m²g/m²). This synthetic, polyester-based lining traps air according to the size of the fibres to keep you warm.

Which fabrics are used to make my pants warm?

We lab test our products to provide you with a comfort indicator. The comfort indicator is measured without tights for pants, and with a thermal T-shirt and a fleece for jackets. The temperature indicated is the external temperature at which the testers were neither warm nor cold. Of course, the perceived temperature varies depending on the intensity of the activity and each individual’s metabolism.

How is comfort temperature measured?

The regular fit allows the pants to be combined with a technical base layer.

What is the fit of the 100 Ski Pants?

The resistance of a fabric is measured by the height of a water column in mm. The higher the pressure, the more waterproof the fabric. Fabric with a waterproof rating of 5,000 mm is resistant to the pressure exerted by a 5,000 mm column of water.
For skiing, we recommend fabrics rated 5,000 to 20,000 mm. At Decathlon, we lab test all of our waterproof products. This product's rating is?/ 5 In a shower test.

How is your pants’ water resistance measured?

These pants have elastic gaiters at the ankles to cover your boots. The seal created by the gaiters keeps the snow out.

How can I prevent snow from getting in my pants?

To optimize your product’s performance and durability: 
*Machine wash at 30°C on a synthetics cycle. 
*Turn the product inside out.
*Use a small amount of detergent. Do not use fabric softener.
*Wring by hand. 
*Dry on a hanger in a warm, well-ventilated place.
Do not dry clean. Do not place on a radiator.

How should I wash my pants?

We commit to repairing your product free of charge for the duration of the warranty. If you need the seams, zippers, or another element repaired, contact your store. However, if we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable.

The model in the photo is wearing a size L and measures 185 cm (6’1”).
Waist size:84 cm (33”)
Inside leg length: 86 cm (34”
Hip: 101 cm (40”)

To help you choose the right size

Ski Pants & Bibs

10,000 mm (Schmerber) membrane, taped seams.

Insulated with synthetic loose fibres, for use in temperatures as low as -6°C.

Breathable fabric and ventilation strip on the back

Breathability

You can wear this versatile jacket for all of your outings whatever the weather thanks to its synthetic fibre insulation, soft collar and ventilation.

Snow Skirt

sleeve length

Membrane Construction

type of hood

thumb pass

breathability (in RET)

Removable Hood

Hood

Style

Zipper Type

Fastener Type

The waterproof zippers, snow skirt, high collar, and adjustable hood and cuffs offer superior insulation to keep you warm.

In addition to the padding, which components provide warmth?

The membrane is a very fine component applied to the inner surface of the outer jacket fabric. This component prevents water from seeping in while wicking away perspiration. The membrane is unbeatable when it comes to keeping you warm and dry.

What is a membrane and what does it do?

A fabric’s water resistance is measured by the height of a water column in mm it can support (test based on the ISO 811 standard). The higher the pressure, the more waterproof the fabric. A component with a water resistance of 8,000 mm therefore withstands the pressure exerted by 8,000 mm of water.

How is the water resistance of a jacket measured?

The 500 jacket is made of sturdy, water-resistant materials that reduce wind chill for better protection against the elements. To check its waterproof rating, this jacket was tested under a special shower test that replicates the conditions skiers face. This jacket’s waterproofing was field-tested in various weather conditions for several days.

Which parts of the jacket protect me in bad weather?

Water repellency is a material’s ability to let water bead off the surface without being absorbed. This jacket features water-repellent components that improve its weather resistance. The exterior surface of the fabric is treated to make it water-repellent.

What is the water-repellent feature of my jacket for?

Bear in mind that the water-repellent feature can be reactivated. To do this, you can use a waterproof spray (sold in our stores): spray the product evenly over the entire item, then allow to dry for 10 to 12 hours.

How to reactivate your jacket’s water repellency

This jacket wicks moisture away. To determine a fabric’s breathability, we measure its resistance to evaporative heat (RET) based on a standardized ISO 11092 test. The lower the RET, the more breathable the fabric.The 500 ski jacket has a RET of 11. However, it is Wedze’s technical solutions (zippers, vents, mesh) that reduce condensation and maximize breathability.

What is a breathable jacket?

Slim fit. The jacket’s sides are straight rather than fitted. This jacket is roomy enough to be worn over a first and second technical layer.

How does the 500 ski jacket fit?

To stay warm and dry, we recommend using the 3-layer technique: 
- Layer 1 or second skin, to stay dry. 
- Layer 2 or insulating layer, to keep the heat in.
- Layer 3 to protect against the elements.

How to dress to stay warm on the slopes

The snow skirt adjusts automatically, and adjustable cuffs block drafts and snow, especially in the event of a fall.

Keeps snow out if you fall

* Close all the zippers on the jacket.
* Turn it inside out.
* Machine wash at 30°C on the delicate cycle with little detergent and no fabric softener. 
Important: Use a gentle/delicate spin cycle (less than 800 rpm). Spinning too fast may create clumps that are difficult to undo.

How should I wash my jacket?

Tumble dry (strongly recommended). 
* Gentle or delicate cycle. 
* Dry on several long cycles to dry completely. * If you do not have a dryer, it will take longer to dry (drying flat can take 1 to 2 weeks). Make sure you pat the jacket to avoid any lumps.

How to dry your jacket

This product is repairable. Solutions may be offered to you in-store. If we can’t repair your product (production defect), we will exchange it or reimburse you.

This product is repairable

The model is wearing size M and is 1.73 m (5’8”) tall
Their measurements are as follows:
- Chest: 85 cm (33.5 in)
- Arm: 57 cm (22.4 in) (from shoulder to wrist)
- Waist: 67 cm (26.4 in)
- Inside leg: 83 cm (32.7 in)
- Hip: 99 cm (39 in)

Women Ski Jackets

clearance

Waterproof membrane and water-repellent outer fabric.

Durability

Wide cuff that can be placed above or below the jacket sleeve.

Ease of use

Dexterity

These gloves were designed for occasional skiers who want to stay warm in winter. They will keep your hands warm so you can enjoy the ski slopes.

Glove Type

abrasion 

reflective

Reinforced Palm

To Bring Warmth

anti-slip

leash

All Wedze gloves and mittens have a water-repellent treatment that makes water slide across the fabric’s surface instead of being absorbed. This means the fabric does not become saturated. It remains light and warm. A treatment applied to the outer surface makes the fabric water repellent. To remain effective, this treatment must be renewed every 2 to 3 washes with specific products that are available in our stores.

Water repellency of the component

These ski gloves have a water-resistant membrane (a very thin polymer film) between the lining and the outer part of the glove. This membrane acts as a barrier to make the product waterproof. The product’s exterior materials are also treated for water repellency. Only a rubber-type glove is watertight. Under extremely wet conditions, a glove with a membrane will have limited waterproofness.

Waterproof membrane

All Wedze gloves and mittens are windproof. Did you know that the wind makes you feel colder? At an outside temperature of 0°C and a wind speed of 20 km/h (12 mph), the temperature will feel like -10°C.Windproof fabrics limit wind chill and cold caused by the speed of the sport.

Windproofing

Simply pull the wrist strap with the opposite hand.

Easy to put on

An elastic drawstring that goes around the wrist can be used to remove the gloves on ski lifts without losing them.

Anti-loss system

It reflects how easily you can handle objects while wearing the glove. All our gloves are field-tested and given a dexterity score on a scale of 1 to 5. Gloves with a dexterity score of 5 allow you to handle objects just as you would with bare hands. 
The dexterity score is based on how well we could remove and put on ski goggles, adjust the hooks on a ski boot, and open and close a jacket.

dreamscape

Kids’ Snowboarding Boots – Indy 100